Samsung NK24M7060VW User manual

User Manual
Kullanım Kılavuzu
NK24M7060VW / TR
COOKER HOOD
DAVLUMBAZ

2
Dear Customer,
Thank you very much for your preference for products. Our objective is to
ensure that you enjoy this product, manufactured environmentally-friendly
with a total sense of quality in a precise working environment at our modern
facilities, most efciently.
We recommend you to read the instruction manual carefully and keep
it handy before you use this chimney hood so that it maintains its quality
just like the rst day you bought it and serves you most efciently.
NOTE:
This Instruction Manual has been prepared for a variety of models.
Some of the features specied in the Manual may not exist in your device.
These features are marked with *.
Our devices are designed for domestic use. They are not for professional
use.
“PLEASE READ THE INSTRUCTIONS BEFORE YOU INSTALL OR USE THIS
DEVICE.”
This product has been manufactured in an environmentally-friendly
and modern plants without harming the nature.
“Conforms with the AEEE Regulations.”
GB

3
CONTENTS
1. Safety Instructions 4
2. Introduction And Technical Drawing
Of The Chimney Hood 7
2.1. Specication Of The Chimney Hood 7
2.2. Accesories 8
3. Installation Of Chimney Hood 9
3.1. Location Of The Chimney Hood 9
3.2. Installation Of Mounting Bracket
To The Chimney Hood 9
3.3. Installation Of Wall Mounting Bracket 9
3.4. Installation Of Inner Duct Mounting Bracket 10
4. Mounting The Chimney Hood On The Wall 10
4.1. Leveling The Chimney Hood 10
4.2. Mounting The Aluminum Pipe 10
5. Functions Of The Chimney Hood 11
5.1. Control Panel 11
5.2. Symbols Functions 11
6. Operating The Chimney Hood 12
6.1. In Ducted Use 12
6.2. Round Charcoal Filter 12
6.3. Use Of Charcoal Filter 12
6.4. Installation Of Charcoal Filter 12
6.5. Use Of Aluminum Cartridge Filter 12
7. Replacing The Bulb 13
8. Maintenance Of The Chimney Hood 13
9. If Chimney Hood Does Not Work 14
10. Customers’ Right Of Choice 15
11. Handling Rules 16
12. Environmentally-Friendly Disposal 17
13. Package Information 17
14. Service List 18
GB

4
1. SAFETY INSTRUCTIONS
1.This product is designed for domestic use.
2.Product Voltage is 220-240 Volts 50Hz.
3.Power cord of your product is tted with grounded
plug. This cord must be plugged into a grounding socket.
4.All electrical installation must be done by a qualied
electrician.
5.Installation by unqualied persons may lead the
product run with lower performance, be damaged or
cause accidents.
6.Power supply cord should not be jammed or crushed.
Power cord should not be close to hobs, etc, otherwise
it may melt and cause re.
7.Do not plug in the product into a socket before the
installation is complete.
8.Make sure the mains switch is easily accessible in
order to cut the power of the product in case of any
danger.
9. CAUTION: Accessible parts may become hot when
used with cooking appliances. Do not touch the bulbs
of your product if used for a long period of time.The
bulbs will be hot and may burn your hand.
10.Kitchen chimneys are designed for domestic use.
If used for other purposes, it may lead to a failure and
not be covered under the warranty.
11.Follow the authorized agencies’ rules and regulations
regarding letting out the air. (This warning does not apply
to usage with non-ducted chimney hoods)
GB

5
12.Food that may burst into ames should not be
cooked under the device.
13.Turn on the product after you place pots, pans, etc on
the hobs. Otherwise excess heat may cause deformation of
some parts of your product.
14.Do not leave hot oil on the hobs. Pans with hot oil
inside may cause self-ignition.
15.When cooking i.e. deep frying, hot oil may burst
into ames. Be careful on your curtains and cloths.
16.Make sure you replace the lters at the recommended
intervals. Filters not replaced on time carry re risk due to
increase of grease on them.
17.Do not use non-re-resistant materials instead of
lters.
18.Keep the potentially dangerous packaging materials
away from children.
19.Do not use your product without a lter, do not
remove lters when the product is operating.
20.In case of start of ames, cut off the power
of the chimney fan and cooker.(Cut off the power by
unplugging the device)
21.Turn off the hobs before you remove pots, pans, etc.
22.If the cleaning is not done periodically, your product
may carry re risk.
23.Cut off the power supply before any maintenance
work. (Cut off the power by unplugging the device)
GB

6
GB
24.For duct-out chimney hoods, use pipes with a
diameter of 150 mm or 120 mm. You should minimize
the ducting distance with minimum bends.
25.Make sure your children do not play with the
product. Do not let young children operate the product.
26.If the power cord is damaged, the damaged cord
should be replaced by the manufacturer or its service
agent or similarly specialized personnel in order to
avoid a dangerous situation.
27.In case of start of ames, cut off the power of the
chimney fan and cooker and cover the ame. Do not
use water to extinguish the re.n
28.WARNING: Install “MAX. 6 A” fuse for the extractor
fan.
29.Always wear work gloves for all maintenance
operations.
30.Grease lter must be cleaned once a month
using non aggresive detergent by hands.
31.The air must not be discharged into a ue that is
used for exhausting fumes from appliances burning
gas or other fuels.(Not applicable to appliances that
only discharge the air back into the room)

7
2. INTRODUCTION AND TECHNICAL DRAWING OF THE CHIMNEY HOOD
2.1. Specication Of The Chimney Hood
A
BC
D
E
F
G
1
2
3
4
5
1. Inner duct
2. Outer duct
3. Control panel
4. Filter
5. Lighting
NK24M7060VW / TR
A59.6 cm
B41.2 cm
C
min. 78.7 - max. 94.7 cm
min. 66.7 - max. 94.7 cm
D15 cm
E17 cm
F20 cm
G36.2 cm
Technicial Specications
Voltage 220-240V ~ 50Hz
Net Weight 10,4 kg
Gross Weight 14 kg
Ducting Diameter 150 / 120 mm
Motor Power Consumption 270 W
Max Extraction 575 m³ / h
Lamp 2 x 1,9 W
GB

8
2.2. Accesories
Images
Parts Name Screw
Ø3,5 x 9,5
Screw
Ø6 x 50
Screw
Ø3,9 x 30
Images
Parts Name Screw anker
Ø10
Screw anker
Ø6
Mul connecon
ange
Images
Parts Name User
manual
Chminey fastening
bracket Damper
Images
Parts Name Duct upper
(Chimney upper)
Duct lower
(Chimney lower)
2x
4x 4x
4x
2x
2x
GB

9
3. INSTALLATION OF CHIMNEY HOOD
3.1. Location Of The Chimney Hood
The minimum distance between the supporting surface for the cooking
vessels on the hob and the lowest part of the range hood. (When the range
hood is located above a gas appliance, this distance shall be at least 65 cm.
3.2. Installation Of Mounting Bracket To The Chimney Hood
Fix the 2 (two) Mounting brackets among the installation accessories
to the chimney hood with one 1 screw nut as shown in Figure 1. Make
sure mounting brackets are inserted in motor box.
3.3. Installation Of Wall Mounting Bracket
Drywall (8mm) anchors are nailed into the holes drilled according
to installation template (A,B,C,D). They are xed into the wall with 2
brackets as shown in Figure 2.
Min. 65 cm.
0
80
50
130
220
180
250
MAX
90
80
70
40
30
10
20
50
0
60
Figure 1 Figure 2
A B
CD
Installation template
GB

10
3.4. Installation Of Inner Duct Mounting Bracket
2 xing holes are drilled on the wall with Ø 6 mm electric drill at a
suitable height and place to x the inner duct hanger plate onto the wall.
6mm drywall anchors are nailed into those holes and inner duct mounting
brackrets are pinned down.At the last step of chimney hood installation,
the inner duct is screwed on the inner duct mounting brackets.
4. MOUNTING THE CHIMNEY HOOD ON THE WALL
Lift the chimney hood body and x the hanger plates onto the wall
anchors as shown in Figure 3.
4.1. Leveling The Chimney Hood
If the chimney hood is inclined on one side, the chimney hood
can be leveled with the adjustment screws as shown in Figure 4.
Once the balancing is complete, the screws shown in Figure 5 must be
xed tightly. After this, x the body with one screw through the hole on
the body.
4.2. Mounting The Aluminum Pipe
Place the aluminum pipe on the plastic duct. Place the other end of the
pipe into the air outlet in the kitchen. (Figure 6)
Figure 4Figure 3
Figure 5 Figure 6
GB