S&B Lawn Systems GENERATION 3 LAWN STRYPER GEN-61522B User manual

Owner’s Manual
Read, Understand and Follow ALL Instructions prior to use.
Lea, entienda y siga todas las instrucciones antes de usar.
S&B Lawn Systems, Inc. / 262-439-9261
Visit https://www.sblawnsystems.com
Model No.
GEN–61522B
CONSTRUCTED WITH AMERICAN STEEL
PACKAGED AND ASSEMBLED IN AMERICA
Stryper Manual.indd 1Stryper Manual.indd 1 6/16/22 11:50 AM6/16/22 11:50 AM

Congratulations...
On your purchase of the GENERATION 3 Lawn StryperTM , a S&B Lawn Systems, Inc.
product. The Lawn StryperTM attachment is designed to easily and safely attach
to most walk-behind, self-propelled and push-type lawn mowers. When used
properly, the Lawn StryperTM attachment will allow you to pattern your lawn just
like the pros do at golf courses, landscape firms and major league ballparks.
Prior to creating an eye-popping, people stopping lawn of art with the
Lawn StryperTM attachment, make certain to read and understand all of the
instructions in this Owner’s Manual. You are responsible for proper product
use and safety.
For great Lawn StryperTM patterns, grass tips, product registration, contact
information and more visit https://www.sblawnsystems.com.
S&B Lawn Systems, Inc. thanks you for your purchase and we wish you and
your patterned lawn much happiness for years to come.
2
tBefore tAfter
3
•
•
•
•
•
•
•
•
•
•
Safety:
Read, and understand all of the instructions in this manual prior to
using the Lawn StryperTM attachment. Follow those
instructions
whenever using the Lawn StryperTM attachment.
Lawn StryperTM attaches to and follows behind your lawn mower during
normal grass-cutting operations, and should not affect the operating
characteristics of your mower. Carefully follow all of your lawn mower
manufacturer’s operating instructions and warnings when using the
Lawn StryperTM attachment.
Lawn StryperTM attachment should not interfere with normal mower
operations, such as cutting / mulching / bagging. If there is any
interference IMMEDIATELY SHUT OFF MOWER, then inspect the
Lawn StryperTM attachment installation, make any adjustments needed
to correct the problem, and reassess operations to verify that the
interference has been resolved.
The Lawn StryperTM attachment is designed to work with most
walk-behind, self-propelled and push-type lawn mowers.
DO NOT USE WITH ANY OTHER TYPE OF MOWER.
The Lawn StryperTM attachment must be properly installed, attached,
and adjusted in order to work along with your particular lawn mower.
Do not assemble, disassemble, attach, inspect, or adjust the
Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
Never stand on the Lawn StryperTM attachment, roller assembly,
cover, or clamps.
Keep hands and feet clear of the Lawn StryperTM attachment during
mowing operations.
Install the Lawn StryperTM attachment on your mower so that it does
not interfere with your ability to walk behind the mower.
If the Lawn StryperTM attachment should interfere with your ability to
mow around obstructions, walkways, or other tightly constrained areas,
SHUT OFF THE MOWER, remove the roller assembly, and then mow
around the obstructed area without the roller assembly attached (but
with clamp and tube assembly still in place). Once this is completed,
once again SHUT OFF THE MOWER, replace the roller assembly,
and then continue with the rest of your patterned mowing.
GENERATION 3
Stryper Manual.indd 2Stryper Manual.indd 2 6/15/22 8:02 PM6/15/22 8:02 PM

Congratulations...
On your purchase of the GENERATION 3 Lawn StryperTM , a S&B Lawn Systems, Inc.
product. The Lawn StryperTM attachment is designed to easily and safely attach
to most walk-behind, self-propelled and push-type lawn mowers. When used
properly, the Lawn StryperTM attachment will allow you to pattern your lawn just
like the pros do at golf courses, landscape firms and major league ballparks.
Prior to creating an eye-popping, people stopping lawn of art with the
Lawn StryperTM attachment, make certain to read and understand all of the
instructions in this Owner’s Manual. You are responsible for proper product
use and safety.
For great Lawn StryperTM patterns, grass tips, product registration, contact
information and more visit https://www.sblawnsystems.com.
S&B Lawn Systems, Inc. thanks you for your purchase and we wish you and
your patterned lawn much happiness for years to come.
2
tBefore tAfter
3
•
•
•
•
•
•
•
•
•
•
Safety:
Read, and understand all of the instructions in this manual prior to
using the Lawn StryperTM attachment. Follow those
instructions
whenever using the Lawn StryperTM attachment.
Lawn StryperTM attaches to and follows behind your lawn mower during
normal grass-cutting operations, and should not affect the operating
characteristics of your mower. Carefully follow all of your lawn mower
manufacturer’s operating instructions and warnings when using the
Lawn StryperTM attachment.
Lawn StryperTM attachment should not interfere with normal mower
operations, such as cutting / mulching / bagging. If there is any
interference IMMEDIATELY SHUT OFF MOWER, then inspect the
Lawn StryperTM attachment installation, make any adjustments needed
to correct the problem, and reassess operations to verify that the
interference has been resolved.
The Lawn StryperTM attachment is designed to work with most
walk-behind, self-propelled and push-type lawn mowers.
DO NOT USE WITH ANY OTHER TYPE OF MOWER.
The Lawn StryperTM attachment must be properly installed, attached,
and adjusted in order to work along with your particular lawn mower.
Do not assemble, disassemble, attach, inspect, or adjust the
Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
Never stand on the Lawn StryperTM attachment, roller assembly,
cover, or clamps.
Keep hands and feet clear of the Lawn StryperTM attachment during
mowing operations.
Install the Lawn StryperTM attachment on your mower so that it does
not interfere with your ability to walk behind the mower.
If the Lawn StryperTM attachment should interfere with your ability to
mow around obstructions, walkways, or other tightly constrained areas,
SHUT OFF THE MOWER, remove the roller assembly, and then mow
around the obstructed area without the roller assembly attached (but
with clamp and tube assembly still in place). Once this is completed,
once again SHUT OFF THE MOWER, replace the roller assembly,
and then continue with the rest of your patterned mowing.
GENERATION 3
Stryper Manual.indd 3Stryper Manual.indd 3 6/15/22 8:02 PM6/15/22 8:02 PM

Parts:
4
Assembly:
• TOOLS Required: Phillips or Flat Head Screw Driver.
• Fill Roller, completely, with DRY Sand.
(sand not included)
IMPORTANT: Work on a flat level surface – make
certain mower is NOT running.
Lawn StryperTM Parts View
5
DO NOT place clamp system over any type of existing wires/
cables that may be present on lawn mower handlebars.
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
A. (2) YSB-G3-011 Gen 3 Lawn Stryper Inner Clamp(s)
B. (2) YSB-G3-012 Gen 3 Lawn Stryper Outer Clamps(s)
C. (2) YSB-G3-015 Gen 3 Lawn Stryper Angle Adjuster(s)
D. (1) YSB-G3-003 Gen 3 Lawn Stryper Hitch Tube
E. (2) YSB-G3-017 Gen 3 Lawn Stryper Corner Tube(s)
F. (2) YSB-G3-013 Gen 3 Lawn Stryper Vertical Tube(s)
G. (1) YSB-G3-030 Gen 3 Lawn Stryper Stainless Steel Hook
H. (1) YSB-G3-022 Gen 3 Lawn Stryper Roller Assembly
I. (2) YSB-G3-021 Gen 3 Lawn Stryper Roller Plug(s)
J. (2) YSB-G3-175 PH Combo Machine Screw(s) ¼ x 20 x 1.75”
K (2) YSB-G3-200 PH Combo Machine Screw(s) ¼ x 20 x 2.00”
L. (2) YSB-G3-275 PH Combo Machine Screw(s) ¼ x 20 x 2.75”
M. (7) YSB-G3-299 Nylon Lock Nut(s) ¼ x 20
N. (1) YSB-G3-289 Washer for Stainless Steel Hook
O. (2) YSB-G3-301 Gen 3 Lawn Stryper Inner Clamp Insert(s)
P. (2) YSB-G3-302 Gen 3 Lawn Stryper Outer Clamp Insert(s)
Stryper Manual.indd 4Stryper Manual.indd 4 6/16/22 3:06 PM6/16/22 3:06 PM

Parts:
4
Assembly:
• TOOLS Required: Phillips or Flat Head Screw Driver.
• Fill Roller, completely, with DRY Sand
(sand not included)
IMPORTANT: Work on a flat level surface – make
certain mower is NOT running.
Lawn StryperTM Parts View
5
DO NOT place clamp system over any type of existing wires/
cables that may be present on lawn mower handlebars.
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
Stryper Manual.indd 5Stryper Manual.indd 5 6/16/22 12:08 PM6/16/22 12:08 PM

H
P
our DRY sand
into opening.
Step 1
6
I
57
Step 1: Fill Roller, Completely, with DRY Sand.
Completely ll Roller Tube (H), WITH DRY SAND, via holes located on ends
of tube. Once completely lled, thread and FULLY TIGHTEN Roller Plug
using a at head screwdriver.
User Tip! Once Completely Filled with DRY Sand, carefully place Roller
Plug(s) (I) back in place. Tube Sand, for Roller Fill is an excellent option.
Once lled, GENTLY tap Roller, while vertical, on a hard surface to create
compaction of sand in Roller. Additional DRY sand usually can be added.
Failure to ll completely ll Roller may result in a less dramatic patterning/
striping effect.
Step 2
Stryper Manual.indd 6Stryper Manual.indd 6 6/16/22 12:11 PM6/16/22 12:11 PM

H
Pour DRY sand
into opening.
Step 1
6
I
57
Step 2: Attach Inner Clamps, Outer
Clamps with applicable inserts to
Handlebars.
Place appropriate Inserts (O & P) into the Inner (A)
and Outer (B) clamps. When properly assembled,
ALIGNMENT MARKS will show a STRAIGHT LINE.
Within the LOWER THIRD of handlebars, place Inner
Clamp (A) on inside of handlebar while attaching Outer Clamp (B) on outside of handlebar.
Be certain to have Inserts (O & P) properly aligned within Inner Clamp (A) and Outer Clamp
(B) when placing on handlebar.
Outer Clamp’s teeth (B) should be facing outward. Check that the word (UP), located on
Outer Clamp (B), is facing upward.
Connect using PH Combo Machine Screw(s) ¼ x 20 x 1.75” (J) and PH Combo Machine
Screw(s) ¼ x 20 x 2.00” (K) and Nylon Lock Nut(s) ¼ x 20 (M) as outlined in above diagram.
DO NOT FULLY TIGHTEN SCREWS AT THIS STAGE.
Repeat same process on other handlebar making certain Outer Clamp teeth (B) are
facing upward.
Alignment marks, when properly assembled, will show straight line on top side of left handle-
bar and bottom side of right handlebar.
Check to see that left clamp assembly and right clamp assembly, on handlebars, are even to
each other.
Tighten clamps to handlebars (DO NOT OVERTIGHTEN).
User Tip! When assembling clamps to handlebars, periodically use the tube assembly to
gauge proper location of clamps on handlebars. Adjustments can always be made to Clamp
positions (A & B) on handlebars, vertical height of tube assembly (E & F), tube assembly
width (D & E) and angle (B, C & E).
DO NOT place clamp system over any type of existing wires/
cables that may be present on lawn mower handlebars.
Step 2
Stryper Manual.indd 7Stryper Manual.indd 7 6/16/22 1:04 PM6/16/22 1:04 PM

Step 3
8
F
C
L
Step 4
9
Step 3: Attach Hitch Tube (D),
Corner Tubes (E), and Vertical
Tubes (F).
Attach Hitch Tube (D) to Corner Tubes
(E) by pressing down on the Valco
Pins and locking into place as outlined
in the diagram above. SET width
of this assembly to the approximate
width of mower handlebars (adjust-
ments can be made later).
Attach Vertical Tubes (F) to U-Bar (D
& E) assembly. By pressing down on
the Valco Pins and locking into place
as outlined in the diagram above (adjustments can be made later).
User Tip! When setting width of U-Bar assembly (D & E), make certain
that Valco Pins are consistent on each side. For example, if Valco Pin is
coming through on hole 2 on left-hand side then Valco Pin should be set
for hole 2 on right-hand side. Doing so will ensure hitch is centered with
lawn mower.
Stryper Manual.indd 8Stryper Manual.indd 8 6/16/22 12:43 PM6/16/22 12:43 PM

Step 3
8
F
C
L
Step 4
9
Step 4: Insert Vertical Tubes into Angle Adjusters.
Set Vertical Tube (F) into Angle Adjuster (C). Make certain that top
portion of Vertical Tube (F) rests FLAT on inner portion of Angle Adjuster
(C) as outlined in above diagram. Screw holes should match up.
Insert PH Combo Machine Screw ¼ x 20 x 2.75” (L) into Angle Adjuster
(C) and Vertical Tube (F) as outlined in above diagram.
Repeat process for other Vertical Tube.
Stryper Manual.indd 9Stryper Manual.indd 9 6/15/22 8:02 PM6/15/22 8:02 PM

Step 6
11
Lawn Mower Handlebar
C
F
A
B
Step 5
10
Step 5: Attach Angle Adjuster (C)
& Tube Assembly to Handlebar
Clamp Assembly.
Align, attach and PARTIALLY
tighten Angel Adjuster assembly &
Tube Assembly to Handlebar Clamp
Assembly using the PH Combo
Machine Screw(s) ¼ x 20 x 2.75” (L)
and the Nylon Lock Nut(s) (M).
User Tip! Do not fully tighten at his
point. Angle adjustments will be
made in a later step. Make adjustment to clamp positions, height of tube
assembly and width of tube assembly if need be to match mower.
M
Lawn Mower
Handlebars
F
F
E
ED
Valco
Holes
Valco
Holes
Valco Pins
Valco Pins
Step 5: Attach Hitch Tube and
Corner Tubes to Vertical
Mount System.
Attach Hitch Tube (D) to Corner
Tubes (E) by pressing down on
Valco Pins and locking into place as
outlined in diagram above. Set width
of U-bar assembly (D&E assembled)
to coincide with the width of Vertical
Bar assembly.
Attach U-bar (D&E assembled) to
Vertical Tubes (F) by simply pressing
down on Valco Pins and locking into
place. Make certain Hitch is centered
to lawn mower.
User Tip! When setting width of U-bar assembly, make certain that
Valco Pins are consistent on each side. For example, if Valco Pin is
coming through on hole 2 on left-hand side then Valco Pin should be set
for hole 2 on right-hand side. Doing so will ensure hitch is centered with
lawn mower.
10
Stryper Manual.indd 10Stryper Manual.indd 10 6/16/22 1:00 PM6/16/22 1:00 PM

Step 6
11
Step 6: Setting Angle and Height.
Swing assembly AS CLOSE to mower as possible without hitting
mower or impeding the mower bagging system*. Make certain left
Clamp and right Clamp angles are the same. Once proper angle
is achieved, FULLY TIGHTEN ALL SCREWS (do not overtighten).
Set height of assembly, via Valco Pins, to NO LESS than 2.5 inches off
the ground. Make certain that heights are the same on left-hand side
and right-hand side.
*Bagging system not supplied with all mowers.
IMPORTANT: Assembly must not be hitting the ground – a minimum
of 2.5 inches of clearance is recommended for proper performance. Set
height adjustment to accommodate. DO NOT assemble that result in an
angle towards user/operator.
User Tip! An assembly that is angling towards back of mower is highly
recommended.
Lawn Mower Handlebar
C
F
A
B
Step 5
10
Stryper Manual.indd 11Stryper Manual.indd 11 6/16/22 12:45 PM6/16/22 12:45 PM

H
G
Step 7
Step 7: - Attach Roller Assembly to Hitch Tube.
Attach sand filled Roller Assembly (H) onto Stainless Steel Hook (G) by
Vertically sliding onto hitch as outlined in above diagram.
User Tip! When you don’t want the patterning effect, or perimeter
cut is necessary, or when there are obstructions such as fence
line, retaining wall, or other objects, remove Roller Assembly (with
mower turned off) while keeping tubing and clamp system intact
(see helpful tips on page 16).
12
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
13
Finished GENERATION 3 Lawn StryperTM
Double Check:
• Make certain stride does not impede with the roller assembly.
• Make certain Lawn StryperTM attachment is adjusted to the correct
height, width and angle.
• Make certain all clamps, tubes and screws are secure.
Additional width, height and angle adjustments may need to be made based
upon personal preference. Use previous guidelines for reference if adjustments
need to be made.
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
Stryper Manual.indd 12Stryper Manual.indd 12 6/15/22 8:02 PM6/15/22 8:02 PM

H
G
Step 7
Step 7: - Attach Roller Assembly to Hitch Tube.
Attach sand filled Roller Assembly (H) onto Stainless Steel Hook (G) by
Vertically sliding onto hitch as outlined in above diagram.
User Tip! When you don’t want the patterning effect, or perimeter
cut is necessary, or when there are obstructions such as fence
line, retaining wall, or other objects, remove Roller Assembly (with
mower turned off) while keeping tubing and clamp system intact
(see helpful tips on page 16).
12
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
13
Finished GENERATION 3 Lawn StryperTM
Double Check:
• Make certain stride does not impede with the roller assembly.
• Make certain Lawn StryperTM attachment is adjusted to the correct
height, width and angle.
• Make certain all clamps, tubes and screws are secure.
Additional width, height and angle adjustments may need to be made based
upon personal preference. Use previous guidelines for reference if adjustments
need to be made.
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
Stryper Manual.indd 13Stryper Manual.indd 13 6/15/22 8:02 PM6/15/22 8:02 PM

14
Lawn Stryper™Warranty:
S&B Lawn Systems, Inc. shall repair any Lawn StryperTM attachment, when
used for residential use*, if defective in materials or if it ceases to function due
to a failure of it’s components. S&B Lawn Systems, Inc. will repair or replace,
at it’s sole discretion, a defective Lawn StryperTM unit. Owner is responsible
for shipping costs. The following time periods, for warranty, apply from date
of purchase:
Money-Back Guarantee: 30 Days
Parts and Accessories: 30 Days
Please visit https://www.sblawnsystems.com for obtaining warranty service or
Must include original date of purchase information, copy of invoice/receipt and
return mailing address.
*Residential Use equates to the use of product solely at owner’s personal residence. Use of product
on more than one location, or to generate income, is considered commercial use. This product in not
intended for commercial use.
Owner Responsibilities:
You must maintain your Lawn StryperTM attachment by following the guidelines
contained in Owner’s Manual. You are responsible for proper product use.
Lawn StryperTM attachment is designed to work with most walk-behind,
self-propelled and push-type lawn mowers. DO NOT USE WITH ANY OTHER
TYPE OF MOWER. Lawn StryperTM assembly attaches to and follows behind
your lawn mower during normal grass-cutting operations, and should not affect
the operating characteristics of your mower. Carefully follow all of your lawn
mower manufacturer’s operating instructions and warnings when using
the Lawn StryperTM attachment.
For a replacement Lawn StryperTM Owner’s Manual, please visit
our website at https://www.sblawnsystems.com
General Conditions:
Lawn StryperTM, a S&B Lawn Systems, Inc. product is not liable for indirect,
incidental or consequential damages in connection with lawn mowers in which
the Lawn StryperTM attachment is attached to, including cost or expenses
of providing substitute equipment or service to the mowers in which it is
attached to. Some states do not allow exclusions of incidental or consequential
damages, so above exclusions and limitations may not apply.
contact us at 262-439-9261
General Tips:
Visual results may vary based upon health of grass, length of grass, available
sunlight and seasonal conditions. A less dramatic patterning effect can be a
result of insufficient sunlight, dormant grass, unhealthy grass, or when used on
Bermuda, St. Augustine, Zoysia or other warm season grass types.
Cutting Perimeter:
Cut perimeter of grass plot once or twice. Doing so will allow for a consistent
turning area and a clean patterning path.
Change Mowing/Pattern Design:
Alternate mowing patterns and designs every few weeks.
‘Line of Sight’ – Admiring Your Patterns:
A dark ‘stripe’ is created when patterning towards the viewer and a light ‘stripe’
is created by patterning away from the viewer. In order to view all of the
benefits, ‘line of sight’ patterning is recommended. For example, if you were
sitting on your front porch, looking out towards your lawn, consider patterning
lines that come straight to and away from your porch as seen in picture below.
If you were to view these same patterns from the side, visual results may be
less dramatic.
15
https://www.sblawnsystems.com
Stryper Manual.indd 14Stryper Manual.indd 14 6/15/22 8:02 PM6/15/22 8:02 PM

14
Lawn Stryper™Warranty:
S&B Lawn Systems, Inc. shall repair any Lawn StryperTM attachment, when
used for residential use*, if defective in materials or if it ceases to function due
to a failure of it’s components. S&B Lawn Systems, Inc. will repair or replace,
at it’s sole discretion, a defective Lawn StryperTM unit. Owner is responsible
for shipping costs. The following time periods, for warranty, apply from date
of purchase:
Money-Back Guarantee: 30 Days
Parts and Accessories: 30 Days
Please visit https://www.sblawnsystems.com for obtaining warranty service or
Must include original date of purchase information, copy of invoice/receipt and
return mailing address.
*Residential Use equates to the use of product solely at owner’s personal residence. Use of product
on more than one location, or to generate income, is considered commercial use. This product in not
intended for commercial use.
Owner Responsibilities:
You must maintain your Lawn StryperTM attachment by following the guidelines
contained in Owner’s Manual. You are responsible for proper product use.
Lawn StryperTM attachment is designed to work with most walk-behind,
self-propelled and push-type lawn mowers. DO NOT USE WITH ANY OTHER
TYPE OF MOWER. Lawn StryperTM assembly attaches to and follows behind
your lawn mower during normal grass-cutting operations, and should not affect
the operating characteristics of your mower. Carefully follow all of your lawn
mower manufacturer’s operating instructions and warnings when using
the Lawn StryperTM attachment.
For a replacement Lawn StryperTM Owner’s Manual, please visit
our website at https://www.sblawnsystems.com
General Conditions:
Lawn StryperTM, a S&B Lawn Systems, Inc. product is not liable for indirect,
incidental or consequential damages in connection with lawn mowers in which
the Lawn StryperTM attachment is attached to, including cost or expenses
of providing substitute equipment or service to the mowers in which it is
attached to. Some states do not allow exclusions of incidental or consequential
damages, so above exclusions and limitations may not apply.
contact us at 262-439-9261
General Tips:
Visual results may vary based upon health of grass, length of grass, available
sunlight and seasonal conditions. A less dramatic patterning effect can be a
result of insufficient sunlight, dormant grass, unhealthy grass, or when used on
Bermuda, St. Augustine, Zoysia or other warm season grass types.
Cutting Perimeter:
Cut perimeter of grass plot once or twice. Doing so will allow for a consistent
turning area and a clean patterning path.
Change Mowing/Pattern Design:
Alternate mowing patterns and designs every few weeks.
‘Line of Sight’ – Admiring Your Patterns:
A dark ‘stripe’ is created when patterning towards the viewer and a light ‘stripe’
is created by patterning away from the viewer. In order to view all of the
benefits, ‘line of sight’ patterning is recommended. For example, if you were
sitting on your front porch, looking out towards your lawn, consider patterning
lines that come straight to and away from your porch as seen in picture below.
If you were to view these same patterns from the side, visual results may be
less dramatic.
15
https://www.sblawnsystems.com
Stryper Manual.indd 15Stryper Manual.indd 15 6/15/22 8:02 PM6/15/22 8:02 PM

General Tips Continued:
Patterning Effect:
The Lawn StryperTM attachment is specifically designed to properly ‘bend’ grass
after it has been cut. This proper ‘bend’ results in light reflecting differently off
grass blades thus producing the pattern effect. Results may vary based
upon health of grass, length of grass, type of grass, dormant/drought stricken
grass, available sunlight and/or seasonal conditions.
Obstructions:
If obstructions such as fences, retaining walls, driveways, walkways, curbs,
ditches, embankments or other objects are present, remove (WITH MOWER
TURNED OFF) Lawn StryperTM Roller Assembly from hitch system. Once cut
around obstruction is complete, attach (WITH MOWER TURNED OFF) the
Roller Assembly to hitch system to return to patterning/Striping.
16
17
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
https://www.sblawnsystems.com
Troubleshooting:
Roller Does Not Turn:
•With mower turned OFF, check to see if any type of debris such as bark,
twigs, stones, or other objects have obstructed the roller’s ability to turn.
If so, with mower turned OFF, remove debris from the roller.
•Make certain that roller plugs, on roller tube, is fully tightened. Check to see
that roller plugs is flush with end cap. A loose plug will impede roller’s ability
to turn properly.
•Make certain that the roller is filled properly with DRY sand.
partially filled roller may not function properly.
Patterning Effect Does Not Show:
•Make certain to view with ‘line of sight’ in mind.
•Lawn StryperTM attachment installed incorrectly – refer to Owner’s Manual.
•Grass may be cut too short.
•For dormant or drought stricken grass. S&B Lawn Systems Inc.,
recommends that the Lawn StryperTM attachment not be used when grass is
dormant or is under stress due to drought.
•Grass may be damaged, unhealthy or too sparse.
•Lack of proper sunlight – partial/full sun is optimal.
U-Bar Assembly is Hitting the Ground:
•With mower turned off, set u-bar assembly to proper height as outlined in
Owner’s Manual.
•With mower turned off, make certain that height is the same on both sides
as outlined in Owner’s Manual.
Visit https://www.sblawnsystems.com for additional tips, frequently asked
questions, product registration, contact information and more.
16 17
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
https://www.sblawnsystems.com
An empty or
Stryper Manual.indd 16Stryper Manual.indd 16 6/15/22 8:02 PM6/15/22 8:02 PM

General Tips Continued:
Patterning Effect:
The Lawn StryperTM attachment is specifically designed to properly ‘bend’ grass
after it has been cut. This proper ‘bend’ results in light reflecting differently off
grass blades thus producing the pattern effect. Results may vary based
upon health of grass, length of grass, type of grass, dormant/drought stricken
grass, available sunlight and/or seasonal conditions.
Obstructions:
If obstructions such as fences, retaining walls, driveways, walkways, curbs,
ditches, embankments or other objects are present, remove (WITH MOWER
TURNED OFF) Lawn StryperTM Roller Assembly from hitch system. Once cut
around obstruction is complete, attach (WITH MOWER TURNED OFF) the
Roller Assembly to hitch system to return to patterning/Striping.
16 17
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
https://www.sblawnsystems.com
Troubleshooting:
Roller Does Not Turn:
•With mower turned OFF, check to see if any type of debris such as bark,
twigs, stones, or other objects have obstructed the roller’s ability to turn.
If so, with mower turned OFF, remove debris from the roller.
•Make certain that roller plugs, on roller tube, is fully tightened. Check to see
that roller plugs is flush with end cap. A loose plug will impede roller’s ability
to turn properly.
•Make certain that the roller is filled properly with DRY sand.
partially filled roller may not function properly.
Patterning Effect Does Not Show:
•Make certain to view with ‘line of sight’ in mind.
•Lawn StryperTM attachment installed incorrectly – refer to Owner’s Manual.
•Grass may be cut too short.
•For dormant or drought stricken grass. S&B Lawn Systems Inc.,
recommends that the Lawn StryperTM attachment not be used when grass is
dormant or is under stress due to drought.
•Grass may be damaged, unhealthy or too sparse.
•Lack of proper sunlight – partial/full sun is optimal.
U-Bar Assembly is Hitting the Ground:
•With mower turned off, set u-bar assembly to proper height as outlined in
Owner’s Manual.
•With mower turned off, make certain that height is the same on both sides
as outlined in Owner’s Manual.
Visit https://www.sblawnsystems.com for additional tips, frequently asked
questions, product registration, contact information and more.
16
17
CAUTION: Do not assemble, disassemble, attach, inspect, or
adjust the Lawn StryperTM attachment while the mower is running.
SHUT OFF THE MOWER before performing any of these actions.
https://www.sblawnsystems.com
An empty or
Stryper Manual.indd 17Stryper Manual.indd 17 6/15/22 8:02 PM6/15/22 8:02 PM

Lawn Care Tips:
It is important to have a healthy lawn in order to experience all of the benefits
of the Lawn StryperTM attachment. Please find below a few general lawn care
tips that will help to ensure a strong and beautiful lawn.
Keep Lawn Mower Blade Sharp:
A common error is to neglect the lawn mower’s blade. A well maintained and
sharp blade enables the grass to be cut cleanly. A dull blade can result in a
‘scalping’ of the grass which can lead to lawn becoming weak, stressed and
even prone to disease. It is recommended that you have your blade
sharpened, by an authorized lawn mower technician, a minimum of once
per season.
Use the “1/3 Rule”:
Another common error is cutting grass too short. It is extremely important to
mow regularly as well as to refrain from cutting more than 1/3 off at a time,
no matter how tall the grass may be. Cutting grass too short may cause undo
stress and may harm the lawn’s ability to support root growth. To determine
your optimal grass length, you must first find out what type of grass you
have. Common grasses include Kentucky Bluegrass, Perennial Ryegrass,
Bent, Fescue and Bermuda Grass. If you do not know what type of grass
you have, simply take a sample over to your local agricultural center for
identification. Listed below are a few recommended heights for some
common grasses.
Kentucky Bluegrass: 2 to 3 inches
Perennial Ryegrass: 2 to 3 inches
Fescue: 2.5 to 3.5 inches
Bermuda: 1/2 to 1 inch
18
https://www.sblawnsystems.com
Lawn Care Tips Continued:
Watering Your Lawn:
When your lawn begins to look stressed or when you step on and it does not
bounce back, it may be time for a thorough watering. Approximately 1 to 2
inches of water, equally distributed, should do the job. Watering should occur
during the early morning hours. As always, know and abide by your local
watering regulations and restrictions.
Proper Fertilization Program:
In order to create and maintain a beautiful lawn, it may be important to
implement a proper fertilization program. Begin by obtaining a soil test kit
which can be found at your local lawn and garden center. Once proper samples
are taken and analyzed, you’ll have a better idea about the nitrogen,
phosphorus and potassium levels of your soil. With this information, you’ll have
a better idea as to what combination(s) of fertilizer you should apply. If unsure
as to what direction to take, consult with your local agricultural center or a lawn
and garden professional.
19
https://www.sblawnsystems.com
Stryper Manual.indd 18Stryper Manual.indd 18 6/15/22 8:02 PM6/15/22 8:02 PM

Lawn Care Tips:
It is important to have a healthy lawn in order to experience all of the benefits
of the Lawn StryperTM attachment. Please find below a few general lawn care
tips that will help to ensure a strong and beautiful lawn.
Keep Lawn Mower Blade Sharp:
A common error is to neglect the lawn mower’s blade. A well maintained and
sharp blade enables the grass to be cut cleanly. A dull blade can result in a
‘scalping’ of the grass which can lead to lawn becoming weak, stressed and
even prone to disease. It is recommended that you have your blade
sharpened, by an authorized lawn mower technician, a minimum of once
per season.
Use the “1/3 Rule”:
Another common error is cutting grass too short. It is extremely important to
mow regularly as well as to refrain from cutting more than 1/3 off at a time,
no matter how tall the grass may be. Cutting grass too short may cause undo
stress and may harm the lawn’s ability to support root growth. To determine
your optimal grass length, you must first find out what type of grass you
have. Common grasses include Kentucky Bluegrass, Perennial Ryegrass,
Bent, Fescue and Bermuda Grass. If you do not know what type of grass
you have, simply take a sample over to your local agricultural center for
identification. Listed below are a few recommended heights for some
common grasses.
Kentucky Bluegrass: 2 to 3 inches
Perennial Ryegrass: 2 to 3 inches
Fescue: 2.5 to 3.5 inches
Bermuda: 1/2 to 1 inch
18
https://www.sblawnsystems.com
Lawn Care Tips Continued:
Watering Your Lawn:
When your lawn begins to look stressed or when you step on and it does not
bounce back, it may be time for a thorough watering. Approximately 1 to 2
inches of water, equally distributed, should do the job. Watering should occur
during the early morning hours. As always, know and abide by your local
watering regulations and restrictions.
Proper Fertilization Program:
In order to create and maintain a beautiful lawn, it may be important to
implement a proper fertilization program. Begin by obtaining a soil test kit
which can be found at your local lawn and garden center. Once proper samples
are taken and analyzed, you’ll have a better idea about the nitrogen,
phosphorus and potassium levels of your soil. With this information, you’ll have
a better idea as to what combination(s) of fertilizer you should apply. If unsure
as to what direction to take, consult with your local agricultural center or a lawn
and garden professional.
19
https://www.sblawnsystems.com
Stryper Manual.indd 19Stryper Manual.indd 19 6/15/22 8:02 PM6/15/22 8:02 PM

Visit https://www.sblawnsystems.com
CONSTRUCTED WITH AMERICAN STEEL
S&B Lawn Systems, Inc.
262-439-9261
Copyright © 2022 S&B Lawn Systems, Inc.
Printed in the USA
PACKAGED AND ASSEMBLED IN AMERICA
22-YSB-G3
Stryper Manual.indd 20Stryper Manual.indd 20 6/15/22 8:02 PM6/15/22 8:02 PM