Ⅰ．General Outlines
Ⅰ- 1．General Outlines
SK1-V21/31 is a series of vertical type KIOSK printer unit based on standard type SK1-21/31.
Large paper holder, bezel unit can be attached to SK1-V21/31 as an option, as well as SK1-21/31.
Here is description about shapes of chassis in this document.
For further information, please refer to the SK1-21/31 Technical Guide.
Ⅰ- 2．Features
■Small and Ultra-Light Weight, Designed for wide variety of systems and equipments
■Max 200mm/sec high-speed printing
■Variety of paper core holders (adjustable for 2 different rolls)
■Available for Barcode printing and 2-dimensions code printing
■Max φ120mm paper roll as standard specifications
■Various Sensors built-in : Paper near end, Paper empty, Head open sensor, Black-Mark sensor
(Option), Gap sensor (Option)
■Wide variety of paper size (58, 60, 80, 83mm)
■Autoloading function
■Versatile operationg environment
＜Other functions＞
zCapable of HEX dump printing and test printing.
zVarious settings, such as enlarged characters, are available.
zLine spacing can be freely adjusted.
zGraphic printing by bit image.
zDownloaded characters and user-defined characters can also be printed.
zPaper feed amount can be set freely.
zWith Ruled Line command, table layouts can be easily printed.
zPage Mode allows erect/inverse images, clockwise 90 degrees/counterclockwise 90
degrees and overlapping printing.
zPage Mode allows setting the paper length to a maximum of 250mm.
zUsing the Image Registration command, the printing layout can be set up beforehand.
zWith the Printing Density command, the printing density can be changed.
zThe command system conforms to ESC/POS.
zCapable of registering print images in internal flash memory.
４
SK1-V21
