Sanipex BAGNODESIGN BDS-ALP-485 Series User manual

INSTALLATION GUIDE
BAGNODESIGN
expertly crafted bathrooms
BDS-ALP-485-XXX
ALPINE URINAL PARTITION
A member of SANIPEXGROUP
www.sanipexgroup.com

A member of SANIPEXGROUP
www.sanipexgroup.com
IMPORTANT PLEASE READ
All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are installed,
used correctly,cleaned and receive regular maintenance in accordance with these instructions.
Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Any alterations made to this product and its components may infringe product certification, infringe water regulations
and invalidate the guarantee.The Installation must comply with all local/national water supply authority regulations/by laws
and building and plumbing regulations, therefore we strongly recommend that your product be installed by a reputable
DISPOSAL GUIDANCE
The best way to ensure your Product has a long life is to follow the Care and Maintenance guides set by the
Manufacturer after purchase.This document can be found at www.sanipexgroup.com.
The life cycle of the product is not in correlation to the product Guarantee; the standards the products are manufactured
or certified to (e.g. CE & WRAS) can exceed past the Guarantee duration.
CLEANING CARE GUIDE
qualified trade's person.
After the life cycle of the product is deemed complete by the end-user please follow the below to dispose of the
items correctly.
Only use a mild soap and water for cleaning.
Rinse with water to remove the mild soap solution.
We recommend the product is dried using a soft cloth
after every use.
use any abrasive or strong cleaning products containing,
Never
bleaches, acids (hydrochloric, formic, phosphorus, chlorine or
acetic), strong detergents, limescale remover, alcohol or dyes etc.
use abrasive cleaning pads, wire wool or microfibre cloths.
Never
use cleaning equipment that may have been pre-used and
Never
contaminated with the above substances.
apply the cleaning product directly onto the finished surface.
Never

ADHESIVE GUN
TOOLS REQUIRED (NOT SUPPLIED)
1
SPIRIT LEVEL
DRILL & BITS SCREW-DRIVER MEASURING TAPE
PENCIL
A member of SANIPEXGROUP
www.sanipexgroup.com

C
A
4x
B
D
2
A member of SANIPEXGROUP
www.sanipexgroup.com

4x
3
A member of SANIPEXGROUP
www.sanipexgroup.com

2x
4
A member of SANIPEXGROUP
www.sanipexgroup.com

5
A member of SANIPEXGROUP
www.sanipexgroup.com

A member of SANIPEXGROUP
www.sanipexgroup.com
6