Sanipex BAGNODESIGN BDS-BIS-WMBASIN User manual

BDS-BIS-WMBASIN
BRISTOL WALL MOUNTED WASH BASIN
www.sanipexgroup.com

IMPORT ANT PLEASE READ


            

         

         

 
           

   




         










 of 

Plastic
Solenoid
Metal Screw Plastic
Gasket
Metal
Gasket
Metal Nut
Note: These fixings are suitable for solid walls only. Plasterboard or stud walls may require specialist
fixings(not supplied). Caution: care should be taken when drilling walls and floors to avoid any
sunken wires or pipes
Drill two holes in the required position on
the wall using a 14mm masonry drill bit, to
a depth of 75mm
Push a wall plug into each hole
Screw a fixing bolt into each fixing plug
using a 8 mm spanner until the spanner
contacts the wall
Place the basin in position against the
wall, locating the fixing bolts through the
holes in the rear of the basin. Push a
plastic washer, followed by a metal
washer, onto each fixing bolt
Screw a metal nut onto each fixing bolt
to secure the basin. Caution: Do not over-
tighten, as this may damage the
1. 2.
3. 4.
5.

www.sanipexgroup.com
INS-BIS-WMBASIN-08-22