Sanipex AQUAECO AQE-ECO-252-252T Series User manual

www.sanipexgroup.com
AQUAECO
WASHROOM AND PLUMBING SOLUTIONS
AQE-ECO-252-252T-XX
AQUAECO DECK MOUNTED & DECK MOUNTED TALL
TOUCHLESS LIQUID SOAP DISPENSER

IMPORTANT PLEASE READ

 

 






 L  C 



 x 
           
           
 








 









Contents
Warnings ........................................................................................................................... 1
Specifications ................................................................................................................... 1
Before usage .................................................................................................................... 2
Name of spare parts ................................................................................................... 2-3
Installation position of dispenser ................................................................................. 4
Installation of spout (for soap) ..................................................................................... 5
Installation of controller (host) .................................................................................... 6
Connection of spare parts ............................................................................................ 7
Method of refill or replace soap .................................................................................. 7
Testing and usage ........................................................................................................... 8
Care and cleaning ....................................................................................................... 8-9
Periodic maintenance .................................................................................................... 9
Long-term suspension of usage ................................................................................... 9
Warnings
Specifications
Power supply AC
AC 100~240V
DC
4*1.5V Alkaline batteries
Sensor detection range 5~150mm
Ambient temperature 1~40℃
Humidity Max.90RH
Soap volume 0~1.5ml (adjustable)
Applicable soap viscosity 100~3800 cPs
Bottle volume 1000ml
For the safety and smooth operation, please pay attention on the following
warnings.
Please DON'T disassemble, repair or refit the products, because it might lead
to electricity shock or product breakdown, unless stated otherwise.
Please DON'T install the products in humid place, especially in bathroom or
Sauna room.
Please DON'T strike the products, as this may damage the unit or cause soap
leakage.
Please DON'T use the product in the place where freezing might be occurred.
Please ensure that the power line separates from hot water line/tube
Please keep the detecting scope clear to avoid interference.
The designated soap liquid is strongly recommended to be used.
Please install the power socket/outlet in the place where water cannot be
reached or sprayed.

Before usage
1. Please read this instruction manual carefully and fix the products
correctly.
2. We reserve the rights to upgrade products without a notice.
3. Please check whether the following spare parts completed or not.
Name of spare parts
Spout for soap-type
(Various styles)
Controller/host for
soap-type S.S bracket
Battery Case (DC)AC Adapter (AC)
Note :
1. For the purchased spout, please take the real product as final, the above
photo is for reference only.
2. As to the spare parts of power supply, please refer to the type of your
purchased products.
Spare parts of power supply
Spare toolkit

AC Adapter
(AC Type)
Battery Case (DC Type)
Host for
soap
Spout
Nozzle
Cone-shape washer Sensor
Hex nut
Screwed bolt
S.S bracket
Soap
bottle(1000ml)
Soap outlet
Sensor wire
Soap tube
Key switch
Sensor plug
Power plug
AC Adapter (AC Type)
Battery Case (DC Type)
Host for soap
Spout
Nozzle
Sensor
S.S bracket
Soap bottle(1000ml)
Soap outlet
Sensor wire Soap tube
Key switch
Sensor plug
Power plug
Soap dispenser (counter-top type)
Wall-mounted host Spout-mounted host
Wall-mounted foam soap dispenser

Installation position of the dispenser
Position of spout
1. Please ensure that distance
between soap spout and
water faucet is not less than
120mm to avoid accidental
activation.
2. Please make sure the distance
between mounted hole of
spout and counter edge is not
more than 80mm so that the
soap can be dispensed in right
place inside of water sink/
counter.
Faucet
Auto Soap
Dispenser
≥120mm
＜80mm
(1) Please ensure that distance between
soap spout and water faucet is not less
than 120mm.
(2) Please make sure the distance
between mounted hole of spout
and counter edge is not more than
80mm.
Sink
Position of host of soap dispenser
1. Please make sure that the length
of soap tube, air tube and sensor
cable are sufficient to connect
with host/control box of the
dispenser in the installation.
2. If the length of soap tube or air
tube is too long, they can be cut
for suitable length.
Standard parameter:
Length of soap tube and air tube both are: 1100mm
Length of sensor cable is: 1350mm
Length of power cable is: 1500mm
Soap tube
Sensor cable
Power cord
80-150mm
150-300mm
Wall
3. Please keep enough space for
refilling soap or replacing soap bottle.
80-150mm
＞450mm
Wall
Floor
Floor

Installation of spout
Installation of spout (on counter top)
Installation of spout (on counter top with S.S bracket)
1. Please remove the component from
spout, put the connection cable of
sensor and the soap tube through the
pre-open hole of counter and then fix
the components in turn.
Soap tube
Sensor
cable
Nut
Cone-shape washer
Please pay attention on the
direction of opening of cone-
shape washer
Fasten the nut
1. If installing the host under the spout, the S.S bracket installation is required
once fix the spout.
2. Please remove the component from spout, put the connection cable of sensor
and the soap tube through the pre-open hole of counter and then fix the
components in turn.
3. Please put the S.S bracket through the corresponding hole according to the
dimension of fixing bolt and adjust the direction of spout and S.S bracket, then
fasten the nut.
S.S bracket
Soap tube
Sensor
cable
Nut
Cone-shape washer
Fasten the
nut
Please pay
attention on the
direction of
opening of
cone-shape
washer
22mm 8mm
Please install the S.S
bracket through the
proper fixed holes.
Bottom
gasket
S.S
bracket
Nut
Soap tube
Sensor
cable
Bottom
gasket Nut
Soap
tube Sensor cable
Type-1 Type-2
2. Please adjust the direction of
spout and then fasten the nut.

Wall
Embedded pipe
Installation of spout (wall-mounted)
1. Please locate and mark the
mounting location of screws on the
wall where embedded the pipe and
then drill appropriate holes and fix
the components.
2. Please insert the sensor cable and
the soap tube into embedded PC pipe
and lead them out from the bottom
of reserved holes and then mount the
spout onto wall（please use the
expand-screws in mounting, if
needed).
3.Please tighten the decorative
cover on the spout.
Nut
Please penetrate the spout
through the fixing board of
decorative wall and adjust its
direction and then fasten the nut.
Other mounting method
Wall
Embedded pipe

Installation of host of soap dispenser
1. Please locate & mark the proposed location of the
host and S.S bracket.
2. Please drill the proposed holes for S.S bracket.
3.Please fix S.S bracket by self-tapping screws on the
proposed location on wall (the screw stopper can be
used with self-tapping screws if needed).
4. 4.Please put the host on S.S bracket (insert the
hanging bracket that is in the back of host into the
hanging hole of S.S bracket).
Depth of hole: 25mm.
Diameter of hole: 3mm (without rubber
stopper) 7mm (with rubber stopper)
Note:
Keep the S.S bracket in horizontal.
25mm
Put the host on S.S bracket.
Hanging-type S.S bracket
Wall-mounted S.S bracket
Screw
hole
holeScrew
Hanging hole
Fix the host on S.S bracket (the
installation of hanging-type S.S
bracket, please refer to the
instruction of installation of spout
(soap dispenser) on page 5) .

Connection of spare parts
1. Connect the male end with female
end of sensor cable.
2. Connect the soap tube and air tube
on corresponding outlets
respectively.
3. Connect the male end with female
end of power cable.
Refill o replace soap
SOAP
1.Twist off the soap bottle. 2.Refill or replace the soap
into the bottle
3.Connect the full-fill soap
bottle with the host
Connect & tighten the plug of sensor
cable in correct direction.
Connect the sensor cable plug with the
host and tighten it in correct direction.
Connect the male end with female end
of power cable properly.
SoapSoap ou
Soap Tube
Connect the soap tube into the soap
outlet of host correctly.

Testing and using
After completion of installation, please test the
product according to the following instructions:
1.Connect with power after filling the
soapinto the bottle.
2.Press the key switch until foam spiting from
the nozzle.
3.Put your hands under spout in appropriate
distance and wait for fixed amount of soap.
1.Put your hand under
the nozzle of spout
2.Soap comes from
nozzle.
Care & cleaning
• For light cleaning
Please use the soft cloth soaked with water and
drying it and then to wipe off the stain affixed on
spout & sensor cabinet.
• For heavy- dirt cleaning
Please use the cloth soaked with right amount of
neutral detergent to wipe off the stain and then clean
by water.
Please be careful during cleaning surrounding of
sensor cabinet to avoid the scratching.
Please do not use the detergent which might do harm
to the spout such as acid detergent, chlorine
decolorizer & alkali detergent.
The following items are prohibited to adopt for
cleaning the product.
The detergents contained abrasive grain, such as
polishing powder. Solvents such as paint and the
solvent covered benzene.
Abrasive tools such as nylon brush/steel wool, etc.
Sensor
window
Caution: please do not put your hands
too close to the nozzle to avoid soap
splashing and prevent failure of the unit.
Note:
please make sure there is no leakage on
connection point of soap tube.
Push!

•Cleaning the nozzle
Please use the soft brush to clean the
nozzle. Please open the nozzle by the Allen
Wrench if the nozzle is blocked.
•Cleaning of soap bottle
Please clean the soap bottle by clear water.
•Cleaning of host system
If there is block or back-flow occurs on the
host, please wash the soap bottle
completely and then refill the clear water
into the bottle, then press the key switch
to clean the host.
Periodic maintenance
Nozzle
Soft brush
Twist
off !
Monthly maintenance:
Please check all the connection points whether there is soap leakage.
Biannual maintenance:
Please check all the connection points and fasten them accordingly and
properly if needed.
Long-term suspension of usage
1.Please pull out all the soap and clean the soap bottle by clear water.
2.Please refill the soap bottle with clear water and complete the connection to
the host.
3.Please press the key switch until the soap contained in soap tube is pumped
out completely.
4.Please clean the soap bottle thoroughly and make it dry and then fix it onto
the host, meanwhile, cut off the power ( take the cell batteries out, if the
power is DC type) .
Please follow the below methods to undertake the cleaning if the dispenser is
under long-term suspension of usage.
Push!

Note:

Note:

AQUAECO
WASHROOM AND PLUMBING SOLUTIONS
www.sanipexgroup.com
INE-ECO-252-252T-XX-03-23