Sanipex AQUAECO AQE-ECO-I302-I302T-A User manual

AQE-ECO-I302-I302T-A
AQUAECO DECK MOUNTED & DECK MOUNTED TALL
TOUCHLESS TAP
www.sanipexgroup.com
AQUAECO
WASHROOM AND PLUMBING SOLUTIONS

IMPORTANT PLEASE READ

 

 






 L  C 



 x 
           
           
 








 









Contents
Warnings ............................................................................................................................ 1
Specifications .................................................................................................................... 1
Before usage ..................................................................................................................... 2
Confirm the spare parts .................................................................................................. 2
Name of spare parts ........................................................................................................ 3
Installation position of the faucet ................................................................................. 4
Installation of control box .............................................................................................. 5
Connection of spare parts ............................................................................................. 5
Installation or replacement of battery ......................................................................... 6
Testing and usage ............................................................................................................ 6
Care and cleaning ............................................................................................................ 7
Clean the filtration system ............................................................................................. 7
Periodic maintenance ..................................................................................................... 8
Long-term supension of use .......................................................................................... 8
Product trouble ............................................................................................................... 8
Trouble shooting ............................................................................................................. 9
Warnings
Specifications
Power supply AC
AC 100~240V
DC
4*1.5V Alkaline batteries
Sensor detection range 5~250mm （base on 300*300mm white board）
Ambient temperature 1~55℃
HumidMax.90RH Humidity
5~0.7MPa Water pressure
Product consumption 100~3800 cStandby: ≤2W；Active:≤5WPs
Flowrate 2L / Min
For the safety and smooth operation, please pay attention on the following
warnings.
Please DON'T disassemble, repair or refit the products, because it might lead
to electricity shock
or product breakdown, unless stated otherwise.
Please DON'T install the products in humid place, especially in bathroom or
Sauna room.
Please DON'T strike the products, as this may damage the unit or cause water
leakage.
Please DON'T use the product in the place where freezing might be occurred.
Please ensure that the power line separates from hot water line/tube
Please keep the detecting scope clear to avoid interference.
Please install the power socket/outlet in the place where water cannot be
reached or sprayed.

Before usage
1. Please read this instruction manual carefully and fix the products correctly.
2. We reserve the rights to upgrade products without a notice.
3. Flush the water supply pipes thoroughly to remove debris. Faucet is designed
for tap water or potable water.
4. Please check whether the following spare parts completed or not.
Confirm the spare parts
Note :
1. As to the spare parts of power supply, please refer to the type of your
purchased products.
Common Tools
needed
Adjustable wrench Screwdriver(Phillips)
Spout for faucetControl box
Screw part
AC Adapter (AC)
Self-tapping
Screw*5pcs
Anchor*5pcs

Name of spare parts
Battery box
AC adapter
Sensor plug
AC adapter input plug
Water inlet
Water outlet
Water outlet hose
Notes：
For the power adapter, please refer to the type you purchased.
Control box
Power output plug
Valve plug
S.S bracket
Sensor
Nozzle
Spout
Hex Nut
Washer
Screwed bolt

Installation position of the dispenser
Tips:
1. Please make sure there is
enough space
for installation of control
box of faucet.
2. The given dimensions
shown on the diagram is
for reference only, the
actual size might be
different than those
indicated on the diagram.
Installation of water faucet
Please take your purchased product as final, the outlook shown in the diagram
might be different from the actual product.
110
53
820
Referenced finished
height 200mm
68
Referenced finished
height of counter top
88
(Diagram)
(Single-Cold type)
Washer
Mounting nut
S.S braided
discharge hose
Sensor
cable
Center of basin
Drain holeFaucet
The outlet of water faucet is toward to the drain hole. 1. Fixed the water faucet
temporarily.
Installation position of water faucet
( Diagram )
1. Take the mounting nut and washer from
the water faucet then put the sensor
cable, discharge pipe and the thread
through the counter top in sequence,
then place the washer and fasten the nut
to fix the water faucet.
2. Adjust the direction of water faucet
(adjusted the water faucet toward to the
drain hole of basin） then fasten the nut
to finish the installation of water faucet.
Note:
Please make sure that the sensor cable and
discharge pipe free of squeezing and binding
during the installation.
Fasten the
mounting
nut
2.Fasten the mounting nut and fix
the water faucet tightly.

Installation of control box
Note:
Please ensure the incoming and outgoing water pipe are connected closely and
comprehensively to avoid water leakage.
19mm
Screw hole
Screw hole
Installation of control box
Completed diagram
Screw
Hang the control
box on the screw
S.S bracket
(1) (2) (3)
Drill 2 pcs 5mm holes on the proposed wall according to the dimension shown on
the diagram ① and install the screws, then fix the control box onto the wall in
accordance with diagram ② (fix the S.S bracket located on the back of the host on
the pre-installed screws).
1. Connect the water
incoming pipe into the inlet
of control box according to
the diagram then fasten it
by wrench.
2. Connect the water
outgoing pipe into the
outlet of control box
according to the diagram
then tight it by wrench.
3. Connect the sensor cable
of water faucet into the
valve plug & power output
plug of control box
according
to the marked direction.
4. Connect the AC adapter's
output plug into the AC
adapter input plug of
control box.
Battery box
AC adapter
Sensor plug
AC adapter input plug
Water inlet
Water outlet
Water outlet hose
Control box
Power output plug
Valve plug
S.S bracket
Sensor
Nozzle
Spout
Hex Nut
Washer
Screwed bolt

Installation or replacement of battery
Install 4 AA
batteries
Take out
battery case
Open the battery
cover of control
box
1. Open the battery cover of control
box and take out the battery case
according to the diagram ①.
2. install 4 pcs AA batteries correctly
and put the battery case into the
control box and fix its cover as per
diagram ②.
Note：
This product is sold without battery.
Note：
Please place the batteries correctly
according to the anode and cathode.
①②
Testing and using
Put your hands under
the nozzle of faucet.
Move your hands away.
Inner
light of
sensor
Sensor
Testing and commissioning
After completion of installation, please test the product according to
the following instructions:
1. Connect the power:
Connect the AC or DC power after the installation of device.
2. Confirm the sensor:
①. Please confirm the sensor inner light is stop flashing or not when
there is no objects in front of sensor (after connecting the power, the
inner light will flash and set the sensing distance automatically.
②. If the inner light is still flashing, please adjust the nozzle's direction
slightly until the flash stop.
③. About 10 minutes passed after connecting the power, the sensor
will finish the flash and sensing distance setting. If the direction of
faucet nozzle is failed to set up after the sensor stops the flash, then
please disconnect the sensor cable and repeat the above steps.
Usage
Pease use the unit as below after the testing is done:
1. Water dispensing
Put your hands under the faucet (50-120mm from the nozzle) then the
water will be dispensed automatically.
Note: Please do not block the nozzle by hands to avoid the water
spraying).
2. Water stoppage
Remove your hands away then the water will be stopped automatically.
Tips:
There is 60 seconds setting in this device, it will stop
dispensing water automatically with 30 seconds even the
hands are still under the device.

Care & Cleaning
Inner
light of
sensor
Sensor
Clean the filtration system
Take out
the filter
net
Filter net
Wash the
fliter net by
water
Filter net
•For light cleaning
Please use the soft cloth soaked with water and drying
it and then to wipe off the stain affixed on spout &
sensor cabinet.
•For heavy- dirt cleaning
Please use the cloth soaked with right amount of
neutral detergent to wipe off the stain and then clean
by water.
Please be careful during cleaning surrounding of
sensor cabinet to avoid the scratching.
Please do not use the detergent which might do harm
to the spout such as acid detergent, chlorine
decolorizer & alkali detergent. The following items are
prohibited to adopt for cleaning the product. The
detergents contained abrasive grain, such as polishing
powder.
Solvent such as ： Paint and the solvent covered
benzene.
Abrasive such as ：Nylon brush/steel wool,etc.
The control box is equipped with independent
filtration system, but if the water quality is low
inside the pipe and with the long-term usage, the
water dispensing might be not good, in this case,
please follow below instructions.
1. Turn off the angle valve placed on the water
supply to avoid the water flow during the
cleaning.
2. Unscrew the inlet pipe and take out the
filter net from water inlet of control box
then wash the blockage and finally fix the
filter device.

Periodic maintenance
Long-term suspension of use
Product trouble
Twice annually:
1. Please check all the connected parts to see whether there is leakage or not,
and fasten or change the loosen or wear-out spare parts according to the
real situation.
2. Please check the faucet and control to see whether they are loosen or not
and fasten they if needed.
Non periodic inspection:
1. Please clean the dirty when the sensing distance becomes short and the
dirty is found on the sensor shell or case.
2. If the water is coming out for 2 seconds and the light of sensor flashes
quickly in 2 seconds, it shows the batteries are in insufficient, please change
the batteries（For the DC type).
Please follow below instructions when the unit is in long-term suspension of use
1. Turn off the incoming valve or main valve of water faucet.
2. Cut off the AC power and take out the batteries.
Please follow the below instructions in case product in trouble
1. Please check the Trouble Shooting table in case product in trouble to
solve the problem.
2. Once there is water leakage occurred, please turn off the water valve
then conduct the trouble shooting.
3. If the trouble shooting is failed even all the given instructions had been
tried, then please contact the installer or the distributor.

Trouble shooting
Symptoms Probable Causes Corrective Action
No battery or wrongly connected
No power supply or wrong
connection
Object in sensing range
Dirt on the sensing window
The connector does not connect
well
Just finishing installation
The connector assemblies are closed
Aerator is blocked
The filter is blocked
Wait for 10 minutes
Open the connector assemblies
Clean the aerato
Clean filter
The connector assemblies are not
open completely
The filter is blocked
Aerator is dirty
The supply water pressure is lower
Turn counterclockwise the adjustment
bolts on connector assemblies with the
hex wrench
Clean filter
Clean the aerator
Check the water supply system
Check the batteries
Check the power supply and the
conncetion
Remove the object
Clean the sensing window
Check the connector
No water flow
(Indicator not
flashing)
The indicator flashes
once every 2 seconds
and the water doesn't
flow out.
Low water flow while
the indicator does not
flash
Object in sensing range Remove object
Some trouble symptoms can be identified by the indicator's flashing. Refer to
"Note of the Indicator Flashing"
Please contact with distributor, if the trouble remains after above-mentioned actions are taken.
Please do not disassembly the other parts of the faucet freely except installing and replacing batteries.
Batteries are out of power
Just power cut
DC or AC connector of AC/DC
transformer may not connect well
Replace batteries
Check the power supply
Reconnect the connector
No water flow while
the indicator flashes
Keep water out within
1 minute while
indicator does not
flash

INE-ECO-I302-I302T-A-03-23
AQUAECO
WASHROOM AND PLUMBING SOLUTIONS
www.sanipexgroup.com