Sanus ALF109 User manual

Sanus Systems
2221 Hwy 36 West
Saint Paul, MN 55113 USA
Customer Service
Americas: 800-359-5520 • 651-484-7988 • [email protected]om
Europe, Middle East, and Africa: + 31 40 2324700 • eur[email protected]om
Asia Pacific: 86 755 8996 9226 • [e-mail]
accents.sanus.com
©2010 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Accents is a Milestone brand.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
(6904-002009<00>)
ALF109
Wood
5.5mm
(7/32 in.)
13mm
(1/2 in.)

6904-002009 <00>
2
OPT
Wood stud walls Troubleshooting and
Maintenance Choose an Option Do Not
WARNING: This product
contains small items that could
be a choking hazard.
Tools required Caution / Warning Heavy! Assistance Required. Loosen/Tighten
CAUTION:
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT
Specications
Weight capacity-DO NOT EXCEED: 58.9 kg (130 lbs) includes TV and any accessories
Tilt: +11° / -10°
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specied by manufacturer.
The wall must be capable of supporting ve times the weight of the monitor and mount combined.
This product is designed for use in wood frame walls only!
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer
Customer Service or call a qualied contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

6904-002009 <00> 3
10° 11°
72.7 mm
2.86 in.
225.1 mm
8.86 in.
431.8 mm
17.0 in.
500 mm
19.7 in.
223.5 mm
8.8 in.
472.4 mm
18.6 in.
775 mm
30.5 in.
475 mm
18.7 in.
165.1 mm
6.5 in.
10° 11°
100mm to 710mm

6904-002009 <00>
4
[01] x 1 [02] x 1
[03] x 1
[04] x 1
[05] x 1 [06] x 1
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Sanus
Systems Customer Service. Never use damaged parts!
Hardware and procedures for multiple mounting congurations are included. When you see this symbol
OPT
, choose the correct conguration to suit your needs. Not all
hardware included will be used.
Supplied Parts and Hardware

6904-002009 <00> 5
5/16 in. x 2.5 in.
M4 / M5 M6 / M8
M4 / M5 M6 / M8
M4 x 30mm
M4
M4 x 12mm
M5 x 30mm
M5
M5 x 12mm
M6 x 35mm
M6
M6 x 20mm
M6 x 12mm
10mm 15mm
M8
M8 x 16mm M8 x 40mm M8 x 60mm
7/32 in. Hex Key
3/16 in. Hex Key
[07] x 4
[10] x 4
[13] x 4
[17] x 4 [18] x 4 [19] x 4 [20] x 4
[21] x 8 [22] x 4 [23] x 4 [24] x 4
[25] x 1
[26] x 1
[28] x 4
[30] x 2
[31] x 1
[32] x 2
[33] x 5
[29] x 4
[27] x 4
[14] x 4 [15] x 4 [16] x 4
[08] x 4
[11] x 4
[09] x 4
[12] x 4

6904-002009 <00>
6
1
CAUTION:
Install TV Brackets
Before you begin, hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M6, or M8). Verify that
there are adequate threads to secure the brackets to the monitor. If you encounter resistance, stop immediately and contact customer service.
CAUTION: Avoid potential personal injuries and property damage! Use the shortest screw and spacer combination to accommodate your needs. Using
hardware that is too long may damage your monitor’s internal components.

6904-002009 <00> 7
1-1
For TVs with a at/unobstructed back. Ensure that the
brackets are level and equally spaced top and bottom
on the back of the TV. Standard congurations are
shown. If you need extra space to accommodate
cables, recesses, or protrusions, see installation option
1-2 that uses spacers. For special applications, or if
you are uncertain about your hardware selection,
contact Customer Service.
OPT
[06]
[05]
[05]
[06]
[07]
[09]
[21]
M4
M6 M8
[05]
[06]
M5
[10]
[12]
[21]
[13]
[14]
[16]
[22]
[05]
[06]
[17]
[20]
[22]
[05]
[06]

6904-002009 <00>
8
1-2
For TVs with an irregular/obstructed back. Ensure that
the brackets are level and equally spaced top and bot-
tom on the back of the TV. Standard congurations are
shown. For special applications, or if you are uncertain
about your hardware selection, contact Customer
Service.
OPT
[06]
[05]
M4
M6 M8
M5
[05]
[06]
[08]
[09]
[21]
[21]
[24] [24]
[23] [12]
[21]
[05]
[06]
[11]
[21]
[23]
[16]
[20]
[22] [22]
[05]
[06]
[15]
[05]
[06]
[18]
[19]

6904-002009 <00> 9
1-3
Slide the horizontal brackets [03] and [04] onto the vertical brackets [05] and
[06]. Make sure that they are evenly spaced left to right. Install screws [27] to
lock horizontal brackets [03] and [04] in position.
[27]
[03]
[05]
[06]
[03]
[04]

6904-002009 <00>
10
CAUTION:
2
Wall Mounting
2-1: Wood Stud Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
DO NOT over-tighten the lag bolts [28].
Any material covering the wall must not exceed 16 mm (5/8 in.).
Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.)

6904-002009 <00> 11
Wood Stud Wall Mounting – See Cautions in Step 2.
1. Locate studs. Verify the center of the stud with an awl or thin nail or
use an edge to edge stud nder.
2. Level the wall plate [01] and mark the hole locations.
3. Drill pilot holes as illustrated.
4. Tighten the lag bolts [28] only until the washers [29] are pulled rmly
against the wall plate [01].
1
2
5.5mm
(7/32 in.)
13mm
(1/2 in.)
4
3
63.5mm
2.5 in.
[01]
[29]
[28]
< 16 mm
(5/8 in.)
75mm
3 in.
2-1

6904-002009 <00>
12
3
HANG THE SWING ARM 02 ONTO THE WALL PLATE 01
Install the saftey bolts [30] using the 3/16 in. hex key [25].
CAUTION: Avoid potential injuries or property damage!
Ensure the safety bolts [30] are secure. Periodic tightening may be required.
[02]
[01]
[30]
[25]
CAUTION:

6904-002009 <00> 13
CAUTION:
4
HANG THE TV/BRACKET ASSEMBLY ONTO THE SWING ARM
HEAVY! You will need assistance with this step.
Level the TV/bracket assembly and install the retaining screw [26].
CAUTION: Avoid potential injuries or property damage! Be sure to install the retaining
screw [26] securely. This will prevent the TV from separating away from the mount.
[26]

6904-002009 <00>
14
CABLE MANAGEMENT
NOTE: Be sure to leave enough slack in the cables to allow the monitor to move
freely. Use the cable ties [33] and cable tie holders [32] to secure the cables to the
arm [02].
5
OPT
[33]
[02]
[32]

6904-002009 <00> 15
[A]
[B]
6
TENSION ADJUSTMENT
NOTE: [A] Adjust arm extension and swivel tension.
[B] Adjust up/down tilt tension.
MAINTENANCE:
[31]
[25]

6904-002009 <00>
16
Milestone AV Technologies and its aliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.
However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or
obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or suciency of the information contained in this document.