Sanus CFR1610 User manual

AV Rack System
CFR1610
INSTRUCTION MANUAL
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the
item to your dealer; contact Customer Service. Never use damaged parts!
CAUTION: Avoid potential personal injuries and property damage!
°Please read through these instructions completely to be sure you’re comfortable with this easy install process.
°Do not use this product for any purpose not explicitly specified by manufacturer.
°Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
°If you do not understand these instructions or have doubts about the safety of the installation,
assembly or use of this product, contact Customer Service.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
CAUTION: Avoid potential personal injuries and
property damage!
°The wall must be capable of supporting five
times the weight of the rack and components or
accessories combined.
°DO NOT install into drywall alone.
400 lbs.
(181.4 kg) 150 lbs. (68.0 kg)
FREE STANDING INSTALLS
(single or stacked)
WALL MOUNTED INSTALLS
includes any components
or accessories includes any components or accessories
CAUTION: To prevent tipping,
°Do not stack more than two (2) rack assemblies.
°If stacking racks of different weight ratings, the rack
with the highest rating needs to go on the bottom.
°Load the rack from the bottom up.
°Load the heaviest item in the rack first.
°Load 50% of the total weight in the lower 1/3 of the rack.
Rack Weight Limit:
DO NOT EXCEED
Customer Service
Americas: 800-359-5520 • 952-225-6013 • [e-mail]
Europe, Middle East, and Africa: [phone] • [e-mail]
Asia Pacific: 86 755 8996 9226 • [e-mail]
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
Rack Weight Limit:
DO NOT EXCEED

2
2.21in
56.1mm
16.00in
406.4mm
2.21in
56.1mm
0.54in
13.7mm
17.50in
444.5mm
10U HEIGHT
20.42in
518.6mm
17.82in
452.5mm
OPENING
1U SHELF
1.72in
43.7mm
19.00in
482.7mm
1U SHELF
REAR VIEW FRONT AND SIDE VIEWS
12.12in
307.8mm
Required Tools
Technical Specifications
AwlStud
Finder
7/32 in.
(5.5 mm)
for wood
Drill Bit
Socket
Wrench
Socket
Wrench
Socket
Wrench
Hammer Drill Bit
3/8 in.
(10 mm)
for concrete
Wall-Mount Wood Stud Installation
Free-Standing Installation
Wall-Mount Concrete Installation
Pencil
Pencil
Level
Level
Level
Phillips
Screwdriver
Phillips
Screwdriver
Phillips
Screwdriver
Slotted
Screwdriver 11/16 in. Wrench
Tape
Measure
Tape
Measure Electric Drill
Electric
Drill
1/2 in.
(13mm)
1/2 in.
(13mm)
1/2 in.
(13mm)
Verify Your Wall Construction - Only for Wall-mount Installs
Wood studs?Solid Concrete/
Concrete Block?
Perfect!
Good to Go
Perfect!
Good to Go
CAUTION:
DO NOT install
into drywall alone
For questions,
contact
Customer Service.
?
*Illustrations may vary depending upon selected model.

3
Supplied Parts
WARNING: This product contains small items that could be a choking hazard if swallowed. Keep these
items away from young children!
qty. 1 qty. 1
qty. 2
qty. 2
qty. 2
LEFT FRAME RIGHT FRAME
BACK BRACE
FRONT BRACES
SHELF 1U (12" deep)
12
3
4
5
qty. 4
qty. 12 qty. 25
qty. 2 qty. 2
qty. 4
qty. 4
qty. 4
qty. 2
U WASHER
LAG SCREW
RACK FOOT
For Free-standing Install
For Wall-mount Install
For Double-stacking Racks
SHELF BACKSTOP
#10-32 X 3/4 SCREW
HOOK AND LOOP
STRAP
CONCRETE ANCHOR
WASHER
613 15
14
12
10 11
9
8
7
5/16-18 NUT 1/4-20 X 3/8 SCREW
qty. 4
TOP
BOTTOM

4
Assemble the Frame
1A 1b
2
Repeat STEP 1B
3
3
7
7
1
2
1/2 in.
(13mm)
1/2 in.
(13mm)

5
3
4
Repeat STEP 1B
Repeat STEP 1B
3
1
1
2
4
2
8
7
7
1/2 in.
(13mm)
4

6
Stacking Frames (second rack sold separately)
How Do You Want To Mount
for FREE-STANDING Installations:
— go to PAGE 7
for WALL-MOUNT Installations:
Wood Stud Installs — go to PAGE 8
Concrete Installs — go to PAGE 10
1 2
6
9

7
Casters (purchased separately)Rack (Leveling) Feet
FREE-STANDING Foot or Caster Installation
CA6CK-B1
caster kit is available
at SANUS.com or on
Amazon.
3
2
1
Tighten the nut until they it's flush
with the bottom of the rack.
CAUTION: To avoid
potential injury or property
damage, always ensure that
your rack is level.
6
6
6
11/16 in.
Tighten the caster until
the nut is flush with the
bottom of the rack.

8
WALL-MOUNT Wood Stud Install
Use a stud
finder ...
... and/or verify
the edges with
an awl or a
small drill bit.
Find a Stud
1
CAUTION: Avoid potential personal injuries and property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm).
• Minimum wood stud size: Nominal 2 x 4 in. (51 x 102 mm). Actual 1 ½ x 3 ½ in. (38 x 89 mm).
Mark TOP Two holes
2
3
Drill TOP Two Holes Partially Install Lag Screws
3 4
≈ 1/2 in.
(13 mm)
3 ½ in. (9 cm)
7/32 in.
(5.5 mm)
12
1/2 in.
(13mm)

9
Hang Tighten TOP Two Lags
Drill Lower Holes Secure Lags
5 6
7 8
3 ½ in. (9 cm)
7/32 in.
(5.5 mm)
Single Frame = 2X
Single Frame = 2X
Stacked Frame = 6X
Stacked Frame = 6X
3
12 10
12
12
11
11
1/2 in.
(13mm)
1/2 in.
(13mm)
12

10
WALL-MOUNT Solid Concrete and Concrete Block Install
Drill TOP Two HolesMark TOP Two holes
Insert Anchors Partially Install Lag Screws
21
34
≈ 1/2 in.
(13 mm)
2X 2X
2X
FLUSH
3/8 in.
(10 mm)
3 ¾ in. (10 cm)
3
12
13
1/2 in.
(13mm)