Sanus CILT3-B1 User manual

We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
Scan for easy install video
http://san.us/675
CILT3-B1 INSTRUCTION MANUAL

2
Does your TV weigh more than 125 lb (56 kg) including accessories?
No — Perfect!
Yes
— This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
125 lb
(56 kg)
Do you have all of the tools needed?
Before getting started, let’s make sure this mount is perfect for you!
1
2
3
4
What is your wall made of?
Unsure?
?
Perfect! Perfect!
Drywall with
wood studs
Solid concrete or
concrete block
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
Call 1-800-359-5520 (UK: 0800-056-2853)
7/32 in.
(5.5 mm)
Wood
3/8 in.
(10 mm)
Concrete
1/2 in.
(13 mm)

3
TV tilts for
the perfect
viewing angle
Adjustment knobs allow fingertip
control or to restrict movement
Kick stands hold TV from wall to
create room to attach cables
Brackets adjust side to side
within the wall plate for
optimal positioning
Features
Level adjustments create
a worry-free installation
TV brackets designed to fit TV
hole patterns from 200 x 200 mm
up to 750 x 400 mm

4
in.
[mm]
UP TO 29.53
750.0
3.31
84.0
29.28
743.8
27.00
685.8
12.00
304.8
15.75
400.0
2.00
50.8
17.25
438.1
LEVEL ADJUST
2°
Dimensions

5
in.
[mm]
0.99
25.1
10°
6°
0.99
25.1

6
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
TV Bracket
TV Bracket
STEP 1 Parts and Hardware
Supplied Parts and Hardware
M4 M6 / M8 Spacer
M8 x 35mm
M6 x 35mm
M6 x 12mm
M6 x 20mm
M4 x 35mm
M4 x 12mm
M8 x 16mm
M8 x 20mm
06
09
04
07
10
11 12 13
x4
x4
x4
x4
x4
x4 x4 x4
08
05
03
x4
x4
x4
01
x1 02
x1
TV Screws
Washers
M4 M6/M8
Spacers

7
5/16 in.
5⁄16 in. x 2 3⁄4 in.
M3
15
16
17
18
x3
x3
x3
x1
STEP 2 Parts and Hardware Adjustments
Washers
Wall Plate
Lag Bolts
Concrete Anchors
5/16 in.
Allen Key
14
x1

8
b
M6 M8
FLAT BACK ROUND BACK CABLESINSET HOLES
M4
1-1 Select TV Screw Diameter 1-2 Select TV Screw Length
If your TV has a flat back, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●irregular / round back TVs
●TVs with inset mounting holes
●extra space needed for cables
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M6, or M8) to use.
STEP 1 Attach Brackets to TV
Too Short
Correct
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
a

9
bSpacer, long screw and washer
aShort screw and washer
1-3 Attach TV Brackets
Center the TV brackets 01 and 02 over your TV hole pattern as shown - making sure the brackets are level.
Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV.
13
02
01
11
11
03
12
12
04 05
08
06
09
07
10

10
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 16 mm (5/8 in.)
●Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.)
●Minimum horizontal space between fasteners: 406 mm (16 in.)
1. Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder.
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
2. Level the wall plate 14 and mark the hole locations in the center of the studs.
STEP 2 Attach Wall Plate - Wood Stud Option
1 2
≤16 mm
(5/8 in.)
406-610 mm
(16-24 in.)
14

11
15 17
3 4
3. Remove the wall plate 14 and drill pilot holes.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
4. Install wall plate 14 using lag bolts 15 and washers 17 . Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
75 mm
(3 in.)
5.5 mm
(7/32 in.)
14

12
1 2
STEP 2 Attach Wall Plate - Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate directly onto the concrete surface
●Minimum solid concrete thickness: 203 mm (8 in.)
●Minimum concrete block size: 203 x 203 x 406 mm (8 x 8x 16 in.)
●Minimum horizontal space between fasteners: 203 mm (8 in.)
1. Level the wall plate 14 and mark three hole locations.
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
2. Remove the wall plate 14 and drill pilot holes into concrete. Never drill into the mortar between blocks.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
10 mm
(3/8 in.)
75 mm
(3 in.)
14

13
34
3. Insert concrete anchors 16 .
CAUTION: Be sure the anchors are seated flush with the concrete surface.
4. Install the wall plate 14 using three lag bolts 15 and washers 17 . Tighten all lag bolts only until the washers are pulled firmly against
the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
15 17
14
16

14
HEAVY! You may need assistance with this step.
STEP 3 Hang TV onto Wall Plate
1. Hook the TV brackets 01 and 02 onto the wall plate 14 .
2. Rest the TV into place against the wall.
3. The brackets click and lock the TV in place.
02 01 14 3
21

15
Manage Cables
1. Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall until the kick stands fall into place.
CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall.
2. Temporarily rest the TV on the kick stands while assembling the cables on the TV.
CAUTION: TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step.
3. Lift the kick stands up while holding the TV.
4. Gently rest the TV back until the brackets click and lock the TV in place.
Release Cords
Kick Stands
1234

16
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the tension knobs
using hex key 18 .
NOTE: Once your TV is in place, tighten the tension
knobs to prevent unwanted movement.
To level your TV, turn the level adjustment screw on the top
of either bracket using hex key 18 to raise or lower that
respective side of the TV.
TV Adjustments
TILT ADJUSTMENT LEVEL ADJUSTMENT
18
18
Loosen
Tighten
Tension Knob
Level Adjustment Screw
Raise Lower

17
REMOVING THE TV
To remove your TV from the wall plate 14 .
Disconnect all cables and then follow the procedures on PAGE 15
to pull the release cords and pull bottom of TV from wall, then lift
TV off the wall plate to remove.
To reattach, follow the procedures in STEP 3 on PAGE 14.
Slide the TV left or right along the wall plate 14 to reposition.
TV LATERAL SHIFT
14
14

18
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
13 mm
(1/2'')
(56 kg)
125 libras
¿Tiene todas las herramientas necesarias?
Antes de comenzar, verifiquemos que este soporte sea perfecto para usted.
1
2
3
4
¿De qué está hecha su pared?
¿No está seguro?
?
¡Perfecto! ¡Perfecto!
Tabiques de yeso con
montantes de madera
Hormigón sólido o
bloques de cemento
5,5 mm
(7/32'')
10 mm
(3/8'')
¿Su televisor pesa más de 56 kg (125 lb), incluidos los accesorios?
No — ¡Perfecto!
Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para
encontrar un soporte compatible.
¿Listo para comenzar?
Lea estas instrucciones en su totalidad para estar seguro de sentirse cómodo con este fácil proceso de instalación. Consulte también el
manual del usuario de su televisor para ver si existe algún requisito especial para instalar su televisor en la pared.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto, póngase
en contacto con el servicio de atención al cliente al 1-800-359-5520 (Reino Unido: 0800-056-2853).
Llame al 1-800-359-5520 (Reino Unido: 0800-056-2853)

19
ESPAÑOL
NOTA: No todos los accesorios incluidos deberán utilizarse.
ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada,
no devuelva el artículo al distribuidor; póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
Piezas y accesorios suministrados
Descripción
Dimensiones
Placas de sujeción diseñadas para adecuarse a televisores con patrones de orificios de 200 x 200 mm hasta 750 x 400 mm.
Las placas de sujeción se mueven de lado a lado dentro de la placa mural para un posicionamiento óptimo.
Los pies de apoyo mantienen al televisor separado de la pared para crear espacio para adjuntar cables.
El televisor se inclina para lograr el ángulo de visualización perfecto.
Los ajustes del nivel crean una instalación sencilla.
Las perillas de ajuste permiten el ajuste manual o limitar el movimiento.
VER PÁGINAS 6-7
VER PÁGINAS 4-5
VER PÁGINA 3

20
ESPAÑOL
PRECAUCIÓN: Evite lesiones personales y daños materiales.
●El yeso que recubre la pared no debe exceder los 16 mm (5/8'').
●Tamaño mínimo del montante de madera: común 51 mm x 102 mm (2'' x 4'') nominal 38 mm x 89 mm (1 1/2'' x 3 1/2'').
●Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16'').
PASO 2 Fijar la placa mural - Opción para montantes de madera
1-1 Seleccione el diámetro de los tornillos para el televisor VER PÁGINA 8
1-2 Seleccione la longitud de los tornillos para el televisor VER PÁGINA 8
Si el dorso del televisor es plano, utilice los tornillos cortos. Los espaciadores y los tornillos largos se proporcionan para:
●los televisores con dorso irregular / redondeado
●los televisores con orificios de montaje intercalados
●dejar un espacio adicional para cables
Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos
(M4, M6 o M8) utilizar.
PRECAUCIÓN: Verifique que el tornillo o la combinación de tornillo y espaciador enrosquen correctamente.
-Si el tornillo es demasiado corto no sostendrá el televisor. -Si es demasiado largo dañará el televisor.
1-3 Acople las placas de sujeción del televisor VER PÁGINA 9
Centre las placas de sujeción 01 y 02 sobre el patrón de orificios del televisor como lo indica la ilustración, asegurándose de que las placas
estén niveladas.
Instale las placas de sujeción usando ya sea la combinación de tornillo corto y arandela o espaciador, o tornillo largo y arandela, que haya
seleccionado para su televisor.
PASO 1 Colocar las placas de sujeción en el televisor
VER PÁGINAS 10-11