Sanyo CH2432 Owner's manual

Drain connection
Drain connection for left side
Refrigerant liquid line (1/4") Flare connection
Refrigerant gas line (3/4") Flare connection
Hole for rear side refrigerant tubing
Hole for through-the-wall refrigerant tubing (ø3-15/16" hole)
Hole for fresh air intake (Knockout hole)
Hole for right side refrigerant tubing (Knockout hole)
Hole for left side drain connection (Knockout hole)
Hole for power supply (Conduit size 1/2")
Infrared rays receiver for wireless remote controller
Cutting position for fresh air intake
1919_THS_I
Dimension : inch
Air intake
Air outlet
2 ft. or more
Hole for wall-through piping (View from front)
9-7/8
7-15/32
8-7/16
51-3/16
26-3/8
11-1/32
12-7/32
50-13/32
5-25/32
12-19/32 6-5/16 3-3/32
3-3/4
5-25/32
4-23/32
2-17/32
5-9/32
5-25/32
1-3/326-5/16
3-9/324-9/16
5-3/4
7-7/32
4-1/16
9-7/8
5-9/16
1-3/848-7/16 (Suspension bolt hole pitch)
3-1/2
5-25/32
2-25/325-3/16
11-1/32
3-15/16 1-3/8
3-3/8
6-3/32 3-15/16
Front (Service space)(Service space)
Holes in the rear side (View from front)
(Suspension bolt hole pitch)
10
or more
10
or more
WARRANTY
SANYO products are warranted against defects in materials and workmanship for the
period below;
LABOR PARTS
Compressor 30 Days 5 Years
Other Components N/A 1 Year
Because of a policy of continuous product improvements, SANYO reserves the right
to change specifications and design without notice.
Full specific warranty rights, conditions, exclusions and obligations are specified in the
warranty packed with each products.
SANYO FISHER COMPANY
A Division of SANYO North America Corporation
21605 Plummer St. Chatsworth, CA 91311
Phone : [phone]
Fax : [phone]
Website: http://www.sanyohvac.com
Dimensional Data
Indoor Unit: THS2432
Outdoor Unit: CH2432
15-3/4
14-31/32 13/32
1-3/16
1-31/32
28-15/16
11
12-1/16
37
Dimension : inch
Hole for anchor bolt (4-ø1/2)
Refrigerant tube joint (narrow tube)
Flare connection 1/4 in (6.35 mm)
Refrigerant tube joint (wide tube)
Flare connection 3/4 in (19.05 mm)
Refrigerant tubing inlet
Power supply inlet
1131_THS_I
1-31/32
13-3/8
4-21/64266-11/16