Sanyo H1340 - ECD Radio / CD Player User manual

OPERATING
INSTRUCTIONS
ECD-HI340
AM/FM Stereo Radio CD Player
with Full Detachable Panel,
1.5 Din Size
Multi-color LCD Display

CONTENTS
Accessories _-__________________-_---- __________________-------_- ________________1
Compact Disc Care __....._________________________________-------------- ______2
Installation __---______________--- _____________________----------_- ____________...3
Using the Detachable Front Panel _________..____________________-_-- ______4 - 5
Electrical Connections __----- _________________----- _________________....... 6 - 7
Location and Function of Controls ________________----- __________________8 - 10
Specification ______________-- __________________----- __________________.._______11
Trouble Shooting _______________________________________----- _________________12
Warranty ____--_________________--- __________________--- ___________________.....13

ACCESSORIES
Please retain the carton and packing materials, as this is the best protection for the
unit should it be necessary to return it for servicing
Check the packing carefully for the following accessories
(1) 1 x l#mounting bracket (used to fix unit to car, see installation method B)
(2) 2 x 2#mounting bracket (used to fix unit to car, see installation method B)
(3) 1 x 3#mounting bracket (used to fix unit to car, see installation method B)
(4) 1 x right bracket (used for “GM” car)
(5) 1 x left bracket (used for “GM” car)
(6) 8 x screw 3x4mm
(used to fix mounting bracket (l#, 2#, 3#) to unit, see installation method B)
(7) 4 x quickie bolt 5x1 Omm (used to fix unit to car, see installation method A)
(8) 1 x quickie bolt 5xl8mm (used to fix unit to car, see installation method A)
(9) 1 x screw 2xl2mm (used to secure the front panel for anti-theft purposes)
(10) 5 x hexagon nut (used to quickie bolt)
(11) 4 x screw 4x1 Omm (used to right/left bracket)
6) (4& t2) 6 t3) & 14) @
1#mounting bracket 2#mounting bracket 3#mounting bracket right bracket
(5) (6)
(7)
03)
@m
left bracket screw quickie bolt quickie bolt
(9) (10) (11)
a3 &
screw hexagon nut screw
CAUTION
l This unit is designed to operate on 12 volts DC, negative ground electrical systems
only
l When fuse replacement is necessary, use only a 15 amp fuse Do not replace with
a higher rated fuse If the fuse blows often, carefully check all electrical connections
for any short circuits and have your car’s voltage regulator checked also
l Do not install the unit where it will be exposed to direct sunlight or hot air discharged
from the car heater
l Do not expose the unit to water or moisture
l This AM/FM Radio with CD Player should not be adjusted or repaired by anyone
except qualified service personnel If servicing is required, return the unit to an
authorized SANYO mobile audio dealer
l Changes or modifications not expressly approved by SANYO may void the user’s
authority to operate this equipment
l This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation 1

COMPACT DISC CARE
Dust, dirt, scratches or warpage can cause a deterioration in the sound, or intermittent
skipping of some tracks during play
I
DIGITAL AUDIO
l This unit has been designed to play 1
compact discs bearing the
identification logo shown on the left
No other discs can be played
l Fingerprints and dust should be
carefully wiped from the signal
surface of the disc (glossy side) with
a soft cloth
l Wipe in a straight motion from the
inside to the outside of the disc
Unlike conventional records, the
compact disc has no grooves to
collect dust and debris Small dust
particies will have no effect on
reproduction quality
l Do not insert a disc which is cracked
into the unit
l Do not apply paper or write anything
on the surface of the disc
l To prevent warping the disc, do not
expose it to direct sunlight, high
humidity or high temperatures for
extended periods
l The unit may not operate properly if
condensation occurs Wait for 1 or 2
hours (to allow the internal parts to
adjust to the surrounding
temperature) before using the unit
l When not using the disc player for
extended periods of time, remove the
compact disc and return the plastic
disc from dust and exposure to the
2

INSTALLATION
Method A
SUB PANEL
‘_ FLANGE NUT
PANEL
Method B
\
QUlCw; BOLT x
MOUNTING
SCREW
P#BFsACKET
PANEL
luAEfKET dJfy ,~ m,janncKr
l#BPaACKET P#BRACKET P#BPnACKET D
tTANDARDMOUNTING CONFIGURATION “JA” MOUNTING CONFIGURATION “Jz” MOUNTING CONFIGURATION
3

USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1 Press the release button (REL), then the right-hand side of the panel will be ejected
2 Remove the front panel by pulling its right-hand side outward
/
3 For safekeeping, store the front panel in the supplied protective case immediately
Protective case

To Reinstall the Front Panel
1 Push the front panel into the main body A ‘click’ sound should be heard
2 Note that if the front panel fails to lock in position properly, pushing the release
button may not release the panel, and the other control buttons may not function
Precautions when Handling
1 Do not drop the front panel
2 Do not put pressure on the display or control buttons when detaching or reinstalling
the front panel
3 Do not touch the contacts on the front panel or on the main unit body It may result
in poor electrical contact
4 If any dirt or foreign substances adhered on the contacts, they can be removed
with a clean and dry cloth
5 Do not expose the front panel to high temperatures or direct sunlight
6 Keep away any volatile agents (e g benzene, thinner, or insecticides) from touching
the surface of the front panel
7 Do not attempt to disassemble the front panel

I
ELECTRICAL CONNECTIONS I
WIRING FOR ECD-HI340
I .II -----
4-speaker System _ _ _ _ , _ _ _ _ _ _ P-speaker System _ _ _ _ _
,
slack) emSpeaker I ; (White/Black) 8 &=
- n Front Left i !
CB
g n Front Riaht I I
(White)@& ,
=@I
Left I
-- Speaker ,
(Gray) CB8 I
- - A Riaht ,
1 (Gray/Black)em Speake;
Ireen) $ @ Rear Left
Eew Speaker
Speaker j
00 not 1
Connect I
Do not I
Connect I
11111 --------------------__I
+12V Constant Power Supply (yellow)
fkignd +12V Accessory/Switched (Red) Wire (Black)
111 Power Antenna/Amplifier Turn On (Blue/Red)
Caution
l DO NOT connect any speaker wires to the metal body or chassis of the vehicle
l Connect each speaker wire directly to each speaker terminal
l All speaker common (-) wires must remain floating
1 Antenna socket
l Insert the plug from the antenna installed in your vehicle into this socket (if your
vehicle has a dual antenna system, a dual antenna to single antenna cable
adaptor may be required )
2 +12V Constant Power Supply (Yellow)
l Connect this wire to the +12V power terminal which receives power continuously
3 +12V Accessory/Switched (Red)
l Connect this wire to the terminal which receives power while the ignition switch
is ON or in the ACCESSORY position
l If the ignition switch does not have an ACC position, connect this wire to a +12V
power terminal which receives power continuously (Same as item 2 )
4 Ground wire (Black)
l Connect this wire to the vehicle chassis
5 Power Antenna/Amplifier Turn On (Blue/Red)
l Connect this wire to the control terminal of a Power Antenna or an external
amplifier
l When not using a Power Antenna or an external amplifier, this wire is not
connected
6

Notes
- When using a two-speaker installation, the Green, Green/Black, Violet and
Violet/Black wires, which are used for a four-speaker installation, are not used
Cover the ends of these wires with electrical tape to prevent them from shorting to
the unit or the vehicle chassis
- When using a two speaker installation, set the FADER control to the center position
- When fuse replacement is necessary, remove the blown fuse by opening the Filter
Box , then install a new 1 amp fuse (switched power supply) or 15 amp fuse
(constant power supply)
I
FILTER BOX
- RCA Line Out Jacks
Connect a patch cable (not supplied) from the White (left rear channel) and Red
(right rear channel) RCA line output jacks to the line input terminals of an external
amplifier
CAUTION -USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY
ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL
This compact Disc Player is made and tested to meet exacting safety standards It
meets FCC requirements and complies with safety performance standards of the U S
Department of Health and Human Services
THIS PRODUCT COMPLES WITH DHHS RULES 21 CFR
SUBCHAPTER J PART 1040 IO AT DATE OF MANUFACTURE
7

LOCATION AND FUNCTION OF CONTROLS
1. ON/OFF
Press POWER button (1) to turn on Press POWER again to turn it off If the
power is off, press BND button (12) or MOD button (13) also can turn on the unit
2. DISC PLAY
Gently insert a compact disc with the label side facing up into the disc slot (2)
The disc is then automatically loaded into the unit and starts playing with the first
track of the disc The digital display will indicate the track number
3. MUTE
Press the MUT button (3) to silence the receiver Press again to resume listening
8