
42V Weatherproof NETWORKABLE LCD MONITOR
Issued 06/08 © 2008 SANYO
CE42LM4WPN-NA
Weatherproof LCD Monitor
WEATHERPROOF LCD MONITOR
SANYO has used all of its expertise in creating a lightweight
aluminum framed LCD monitor which is protected by anti
reflected tamper glass. This means that the SANYO
weatherproof monitor can be used in a wide variety of
environments due to it having IP56 weather-resistant
approval. The SANYO weatherproof LCD will make the ideal
display for the pub courtyards and gardens (perfect due to the
recent no-smoking lows), Digital signage, Industries and public
display
EXTENSIVE INPUT & OUTPUT TERMINALS
The 42LM4WPN has various input and output terminals
including component(Y,Pb,Pr) or RGBHV input and output with
5-BNC, composite video input and output with BNC, and RS-
232 control port (serial D-Sub 9) input and output which offer
the daisy chain connection. There are computer inputs (a D-
Sub 15 RGB terminal) and HDMI input with HDCP for High
definition signals. There are also jacks for an external audio
amp and speakers system (RCA).
ANTI REFLECTION TAMPER GLASS
The 42LM4WPN has a tough anti refection tampered glass.
This offers the protection for the panel surface in the public
display circumstance. The glass is approx. 1/10 less reflection
and 5 times tougher than the usual float glass.
ALUMINUM CABINET & NON HOLES DESIGN
The 42LM4WPN uses Anodized aluminum the same materials
as a sailing boat and it has quite unique ‘Non-Holes’ ventilation
design which protect against mischief in the public display
applications and less maintenance from dust and oil
circumstance
OPTIONAL PJ-NET ORGANIZER
An optional network box (POA-LN01) makes it possible to use
the 42LM4WPN as a network monitor, using your internet
browser to monitor and control the display's properties.
Additional software is not required.
Specifications
Type Liquid Crystal Display Panel
Screen Size 42V (Landscape / Portrait use available)
Portrait is turning clockwise in 90 degree)
Aspect Ratio 16:9
Resolution WXGA 1366 (H) x 768 (V)
Brightness 500 (cd/m2for panel)
Contrast Ratio 800:1 (typical)
Viewing Angle 178° (Vertical/Horizontal)
Panel tilt angle 90 degree tilt available (panel downward)
Response Time 8ms (gray to gray)
Computer Compatibility VGA, SVGA, XGA, SXGA, WXGA, UXGA
Audio Amp N/A
Speaker N/A
Input Terminals
AV1
Video / Audio (Scart)
AV2 Component (Y,Pb,Pr) / RGBHV (BNC x 5)
Audio (RCA x 2)
AV3 Video (BNC x1)
Computer 1 RGB (D-Sub 15)
HDMI HDMI v1.1 w/HDCP
RS-232 Serial (D-Sub 9)
Output Terminals
AV2 Component (Y,Pr,Pb) / RGBHV (BNC x 5)
Audio (RCA x 2)
AV3 Video (BNC x1)
Audio Monitor Output Audio (RCA x 2)
RS-232 Serial (D-Sub 9)
Power Supply AC 100-240V 50-60Hz
Power Consumption 225W
Operation Temperature Operation 32-115
(Continuous Operation -5 -115°F)
Operation Altitude Up to 13, 124ft (4,000m)
Dimensions (WxHxD) 41.3” x 25.7” x 6.4” (w/o Option)
Net Weight 82 lbs. (w/o Option)
Included Accessories Owner's Manual; Remote Control w/Batteries;
AC Power Cord
Optional Accessories PJ-Net Organizer (POA-LN01)
IP Rating IP56 Weather Proof
Safety UL60950 2003
CAN/CSA-C22.2
FCC Rating FCC Part15 classB
Caution:
Due to product design considerations,
please consult with a qualified
installation engineer prior to monitor
ceiling mounting. Ceiling mounting
must be such so the ambient
temperature does not exceed 104°F
and that the proper side-supporting
bracket, specifically designed for
ceilings, is used.
Because its products are subject to continuous improvement, SANYO reserves the right to modify
product design and specifications without notice and withoutincurring any obligations. It is not
recommended to install the screen in direct sunlight without adequate shading. Using in direct
sunlight may cause a black shadow to appear on the screen and will disappear when panel
temperature goes down.
Optional PJ-Net Organizer
(POA-LN01)
Rear Input Panel