Sanyo LMU-TF150A2 User manual

SERVICE MANUAL
15" COLOR LCD MONITOR
LMU-TF150A2
(GENERAL)
REFERENCE NO. SM 920008
PRODUCT CODE NO.
LMU-TF150A2 1 938 102 10
SANYO Electric Co., Ltd.
OSAKA, JAPAN

INDEX
Page
PRECAUTIONS ----------------------------------------------------------------------------------- 2
1, MAIN SPECIFICATION ----------------------------------------------------------------------3
2, TROUBLE SHOOTING ---------------------------------------------------------------------- 4,5,6
3, MAINTENANCE
Disassembling the major components ---------------------------------------------- 7
4, BLOCK DIAGRAM ---------------------------------------------------------------------------- 8
5, CONNECTION DIAGRAM ------------------------------------------------------------------ 9
6, TABLE OF SIGNAL NAME ----------------------------------------------------------------- 10,11
7, EXPLODED VIEW AND PARTS LIST
7-1 Exploded View ------------------------------------------------------------------------ 12
7-2 Parts List -------------------------------------------------------------------------------- 13
8, APPENDEX ------------------------------------------------------------------------------------- 14
Refer to the separate volume user's guide for instruction.
- 1 -

PRECAUTIONS
Placement precautions
lAvoid placing the unit in humid or dusty places, or where it will be exposed to excessive heat
(direct sunlight, heaters, etc.)
lDo not step on or set anything on the AC cord. DAMAGE TO THE AC CORD IS A
SAFETY RISK AND CAN CAUSE A FIRE.
lInstall the unit only on a stable and smooth surface.
lDo not connect the unit to the same AC outlet with appliances that generate large amounts of
interference (such as heaters with thermostats, appliances with motors, etc.). It is best to use a
completely separate electrical outlet.
lKeep the unit away from water. If water accidentally enters the unit, unplug the AC power cord
immediately. DO NOT PLUG IN THE UNIT AGAIN.
Handling precautions
lAvoid bending, kinking or damaging the AC power cord.
lNever insert or remove the power cord with wet hands. Also, be sure to hold cord by the plug
when removing it from the outlet.
lDo not remove any parts that are held in place with screws. (The unit does not contain any user
serviceable items.)
lMaintain standard room temperature (5oC to 35oC, or 41oF to 95 oF) during use. Do not subject
the unit to shock or vibration. Do not move the unit while it is in use.
lA rapid increase in room temperature in cool weather can cause condensation to from inside the
unit. If this occurs, wait at least 15 minutes after turning the unit on before attempting to operate it.
- 2 -

1. MAIN SPECIFICATION
LCD
Panel Type
TFT
Screen Size
15.0"
Pixel Pitch
0.2970 X0.2970 mm
Pixel Format
1,024 X 768
Effective Viewing Area
304.1 X 228.1 mm
Brightness 200 cd/m
2
Response Time
40 ms
Contrast
350 : 1
Viewing Angle
Up:55, Down:65, Right:70, Left:70 deg.
(Contrast Ratio:5)
Color
16.77 million
Back Light
Type
CCFL
No.
2 pcs
Synchronization
Horizontal
24.8 - 60.2 kHz
Frequencies
Vertical
60.0 - 75.0 Hz
Input Signal
System
Analog RGB, Video 0.7Vp-p
Input Impedance
75 ohm
Sync. Type/Level
Separate TTL (+/-)
Audio
Line in
Stereo (Mini Jack X 1)
Headphone
Stereo (Mini Jack X 1)
Speaker
Stereo (0.2W X 2)
Video
15PIN MINI D-SUB
External Control
Switch/Volume
Brightness, Power Switch, Audio Volume
On-Screen Display
Auto Adjust, Contrast, Horizontal Size, Focus, Horizontal
Position, Vertical Position, Color, Recall, Black level
Language :English, German, French, Spanish
Environment
Temperature
Operating : 5 to 35deg. Storage : -20 to 60deg.
Humidity
30 - 85% RH (Non Condensing)
Power Supply (AC Adapter)
Input : AC 115 - 240V Output : DC12V
Model Name
GI40-US1225
Power Consumption
30W (Standby : 5W max.)
Physical
Dimensions (WXHXD)
399 X 412 X 199 mm
Weight
4.5kg
Power Management
VESA DPMS
USB HUB
USB standard Rev. 1.1
Self-Powered/Bus Powered
Upstream X 1, Downstream X 3
Tilt/Swivel
Up 20 deg., Down 0 deg., / Swivel Function
Plug & Play
DDC1, DDC2B (VESA Standard)
Other Features
Auto Display Adjustment, Digital Smoothing Full Screen
Expansion
Accessories
AC Adapter & Cord, RGB Cable, Audio Cable, USB Cable
- 3 -

2. TROUBLESHOOTING
Check the following for troubles of LCD monitor.
No. Symptom Check Points Treatments Class
1Is the Power "ON" to a LCD Monitor ? Check AC outlet, AC cord, DC Jack and Power switch for a
LCD monitor A
2Is an AC Adapter defective? Replace an AC Adapter with the
new one B
3Is the wire harness between main PCB
and DC IN PCB secured firmly ? Check the connection B
4Is the Power Supply circuit on main
PCB defective ? Replace the main PCB with the new one B
1Is the Power "ON" to a Computer ? Check the Power Supply for a
Computer A
2Is a computer standing by ? Be out of standing by condition,
by operating to a computer A
3Is the Image Processing circuit on
main PCB defective ? Replace the main PCB with the new one B
1Is a screen saver programming
running ?
Press any key or touch the
mouse, to end the screen saver
program A
2Is a signal cable connected securely ? Check the connection of a signal
cable A
3Disconnected a signal cable ? or Bent
a terminal pin ? Replace a signal cable with the new one C
4Is the computer's signal timing not
agreeable to the LCD's specification ? Adjust the computer's signal timing, if possible A
5Is the wire harness between Inverter PCB and a LCD module secured firmly
?
Check the connection of wire
harness B
6Is the wire harness between main PCB
and Inverter PCB secured firmly ? Check the connection of wire harness B
7
Is the wire harness between main PCB
and SW/LED PCB or main PCB and
Brightness control volume connected
securely ?
Ensure the connection of a wire
harness B
8Is the Brightness control volume
defective ? Replace the Volume PCB with new one, and check the screen B
9Is the LCD module defective ? Replace a LCD module with the
new one B
10 Is the Inverter unit defective ? Replace an Inverter unit with the
new one B
11 Is the display circuit on main PCB
defective ? Replace the main PCB with the new one B
1Is a computer standing by ? Be out of standing by condition,
by operating to a computer A
2Is a signal cable connected securely ? Check the connection of a signal
cable A
3Disconnected a signal cable ? or Bent
a terminal pin ? Replace a signal cable with the new one C
No Picture with
Power Indicator OFF
No Picture with
Power Indicator in
Green
No Picture with
Power Indicator
blinking in Green
No Picture with
Power Indicator in
Amber
1
3
4
2
- 4 -

No. Symptom Check Points Treatments Class
1Is the wire harness between main PCB
and LCD module secured firmly ? Check the connection of wire harness B
2Is the LCD module defective ? Replace a LCD module with the
new one B
3Is the main PCB defective ? Replace the main PCB with the
new one B
1Is the wire harness between inverter
and a LCD module secured firmly ? Ensure the connection of a wire harness B
2Is the wire harness between one of inverters and main PCB secured firmly
?
Ensure the connection of a wire
harness B
3Is the display circuit on main PCB
defective ? Replace the main PCB with the new one B
1Is the adjustment for screen performed
correctly ? Adjust the screen correctly A
2Is the output level on image from a computer not agreeable to LCD's
specification ?
Check the specification of a
computer C
3Is the size of screen set correctly ? Set the size of screen again(refer to User's Manual for
computer) A
1Is the adjustment for screen performed
correctly ? Adjust the screen correctly A
2Is a signal cable connected securely ? Check the connection of a signal
cable A
3Is a sigil cable extended ? Don't extend a signal cable A
4Is the output level on image from a computer not agreeable to LCD's
specification ?
Check the specification of a
computer C
5Is the Image Processing circuit on
main PCB defective ? Replace the main PCB with the new one B
1Is a signal cable connected securely ? Check the connection of a signal
cable A
2Is the connection between main PCB
and a LCD module securely ? Check the connector B
3Is the Image Processing circuit on
main PCB defective ? Replace the main PCB with the new one B
1Is the audio cable connected securely
?Ensure the connection of the audio cable A
2Is the position of audio volume at the
minimum position ? Set the audio volume at the appropriate position A
3Is the volume setting for an audio
equipment adequately ? Refer to the user's manual for an audio equipment A
4Is the wire harness between main PCB
and Audio PCB securely ? Ensure the connection of a wire harness B
5Is the wire harness between Audio
PCB and Volume PCB securely ? Ensure the connection of a wire harness B
8
5
6
7
White/Grey on
whole
screen(Nothing on
screen)
No sound
Part of colors(R/G/B)
is not displayed.
Black line appears in
vertically
Screen is distorted
Dark screen
Screen's display
range is incorrect
9
10
- 5 -

No. Symptom Check Points Treatments Class
6Is the wire harness between Audio
PCB and DC IN PCB securely ? Ensure the connection of a wire harness B
7Is the wire harness to speakers
securely ? Ensure the connection of a wire harness B
8Is the Audio PCB defective ? Replace the Volume PCB with
new one, and check the screen B
1Is a LCD monitor connected to an USB
devise securely with USB cable ? Ensure the connection of the USB cable A
2Upon a timing, a PC does not detects
an USB Hub Reinstall the USB cable A
3Upon a PC's OS or version, a PC
cannot control USB devise
Refer to the user's manual for a
PC and OS. Ensure a PC
supports USB A
4Is the wire harness between main PCB or DC IN PCB and USB PCB secured
firmly ?
Ensure the connection of a wire
harness B
5Is the wire harness between USB PCB and a relay PCB for USB secured
firmly ?
Ensure the connection of a wire
harness B
6Is the USB PCB defective ? Replace the USB PCB with new
one B
1Is a LCD monitor connected to an USB
devise securely with USB cable ? Ensure the connection of the USB cable A
2Upon a timing, a PC does not detects
an USB devise Reinstall the USB cable A
3Is the driver software for a USB devise
loaded correctly ? Refer to the user's manual for an USB devise. Reload it to a PC. A
4Is the USB PCB defective ? Replace the USB PCB with new
one B
1Is the USB devise in self-powered connected with a LCD Monitor AC is
not providing ?
Provide AC power to a LCD
Monitor. Check Warning is not
displayed. Refer to the User's
manual for an USB devise,
connect an AC Adapter to a LCD
A
2Is the connection between the USB
PCB and DC IN PCB secured firmly ? Ensure the connection B
3Is the USB PCB defective ? Replace the USB PCB with the
new one B
A It is possible to treated by end-user
B It might be possible to treat by end-user in some case.
C It must be treated by Professional Technical Staff
12
13
10
11
A connected USB
devise in self-
powered does not
work
No sound
USB devise does not
work(a PC does not
detect an USB Hub)
USB devise does not
work(a PC does not
detect an USB
devise)
- 6 -

3. MAINTENANCE
How to remove the major components
(1) Stand Cover
1.Place your fingers in a hollow of the Stand Cover. While pressing the Stand Cover
hollow inside, and pull it your side.
(2) Main unit and Stand
1.Unscrew a Stand at the metal bracket to be secured with a Main unit (4-Screws)
2.Disconnect the USB cable
(3) Cabinet
1.Unscrew a Rear Cabinet (6-Screws)
2.While pressing the top portion of a Front Cabinet, pull the hooks your side
3.Disconnect the lead wires to Switch/LED PCB
(4) Switch/LED PCB and Brightness Volume PCB
1.Unscrew the Switch/LED PCB and Brightness Volume (6-Screws)
2.Disconnect the leads wire from Switch/LED PCB
3.Disconnect the leads wire from Brightness Volume PCB
(5) LCD Panel
1.Unscrew a LCD Panel (4-Screws)
2.Holding a LCD Panel up, then disconnect two lead wires from Inverter unit
3.Disconnect two FPC connectors from the Main Logic PCB
(6) Inverter Units
1.Disconnect lead wires to the Main Logic PCB
2.Unscrew the Inverter PCB (4-Screws)
(7) Main Logic PCB
1.Disconnect a RGB cable
2.Unscrew the shield plate over the Main Logic PCB (5-Screws)
3.Remove the Inverter connector, DC connector and Switch/LED connector
4.Unscrew a metal bracket to be secured with RGB connector (2-Screws)
(8) DC-IN PCB
1.Unscrew the DC-IN PCB (2-Screws)
2.Disconnect the connectors from a Power Switch, the DC connector and the
Audio/USB connector
(9) Power Switch
1.While pressing the hook of a Power Switch, and pull it out
(10) USB PCB in a Stand
1.Unscrew a Stand Base (4-Screws)
2.Remove a Stand Base
3.Unscrew the USB PCB (3-Screws)
4.Disconnect the lead wires from Audio/USB-IN PCB
5.Disconnect the lead wires from AUDIO PCB
(11) AD-IN PCB
1.Unscrew the AD-IN PCB (2-Screws)
2.Disconnect the lead wires from USB PCB
3.Disconnect the lead wires from Audio/USB PCB
(12) Audio PCB
1.Unscrew the Audio PCB (3-Screws)
2.Disconnect the lead wires from Audio/USB-IN PCB
3.Disconnect the lead wires from USB PCB
4.Disconnect the lead wires from Audio/USB-IN PCB
5.Disconnect the lead wires from Speaker (Right/Left)
- 7 -

MICRO CONTROLLER ROM
CHEETAH3
TFT
XGA LCD PANEL
PANEL CONTROL
POWER SUPPLY
CRC
VIDEO
PRE-AMP
SAMPLING
PLL
DB15
Vsync Hsync Red Green Blue
4. BLOCK DIAGRAM
- 8 -

Analogue Interface P.C.B
SANDDUNE2
AC
Adapter
Inverter
Unit
Brightness Volume
P.C.B
USB
P.C.B
DC IN
P.C.B
USB/AUDIO
Connector
P.C.B
Switch / LED
P.C.B
VR1
AC
Plug
Computer
J201
USB Device
USB
Downstream Port
VGA
Port
VR2
Audio P.C.B
5. Connection Diagram
Speaker (R)
Speaker (L)
TFT 15-inch
Liquid Crystal
Display
Power Switch
USB Upstream
Port
CN202
J101
HEADPHONE OUT
LINE IN
GND
VR2
+12V
ON(=5V)
VR1
+DATA
-DATA
LED_G
MENU
N.C.
VRBC
VR2
VRC
LED_R
UP
VRB2
VR1
DOWN
N.C.
SEL
VRB1
VRB2
VRBC
+DATA
+DATA
-DATA
-DATA
-DATA
+DATA
-DATA
+DATA
-DATA
-DATA
+DATA
+DATA
N.C.
N.C.
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
GND
+DATA
VCC
-DATA
COLD1
HOT1
COLD1N.C. HOT1
F_GND
F_GND
F_GND
F_GND
F_GND
F_GND
F_GND
F_GND
12V
GND
GND
12V
MUTE
GND
L
GND
N.C.
DDDA
GREEN
VSYNC
DDCLK
HSYNC
BLUE
N.C.
N.C. RED
DDCLK
VSYNC
HSYNC
DDDA N.C.
N.C. BLUE
GREEN
RED
GND
12V
SPOUTL+
SPOUTL-
SPOUTR-
SPOUTR+
RE0
VRB1
TEST
TEST
TEST
VCC
RO0
VCC
RO1
RO2
RO3
GND
RO4
RO5
RO6
RO7
GND
GO0
GO1
GO2
GO3
GND
GO4
GO5
GO6
GO7
GND
BO0
BO1
BO2
BO3
GND
BO4
BO5
BO6
BO7
GND
NC
GND
HD
GND
VD
GND
DENA
GND
GND
RE1
RE2
RE3
GND
RE4
RE5
RE6
RE7
GND
GE0
GE1
GE2
GE3
GND
GE4
GE5
GE6
GE7
GND
BE0
BE1
BE2
BE3
GND
BE4
BE5
BE6
BE7
GND
DCLK
GND
GND
VCC2 GND
GND
GND
GND
GND
GND
GND
-DATA2
GND
GND
GND
GND
GND
GND
+DATA2
GND
GND
GND
GND
GND
GND
R
N.C.
CN1
1
2 3
4 5
P3
1
2 3
4 5
P7
1
2
CN203
1
2
CN203
1
2 3
4 Frame
CN5
1 2
3 4
Frame
CN3
1
2 3
4
Frame
CN202
1
2
3
4
5
CN6
1
2
3
CN4
1
2 3
4
Frame
8 15
7 14
6 13
5
12 4
11 3
10 2
9 1
1
2 3
4
Frame
CN2
1 2
3
CN201
1
2
3
4
5
6
7
8
9
10
11
12
13
P2
1
2
3
4
5
6
7
8
P6
8
15
7
14
6
13
5
12
4
11
3
10
2
9 1
CN202
1
2
1
2
1
2
CN2
1
2
CN50
1
2 3
CN1
1
2 3
CN201
1
2
CN101
1
2 3
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
P10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
P9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
CN2
1 2
3 4
5
CN204
1 2
3 4
5
CN102
1
2
3
4
CN201
1
2
3
4
P5
1
2
3
CN3
1
2 3
- 9 -

6. TABLE OF SIGNAL NAME
Symbol
Signal Name
Location
Notes
RED RED/Analog Video Signal P6-1
GREEN
GREEN/Analog Video Signal
P6-2
BLUE
BLUE/Analog Video Signal
P6-3
DDDA(ID1)
DDC Data
P6-12
HSYNC
Horizontal Synchronizing Signal
P6-13
VSYNC
Vertical Synchronizing Signal
P6-14
DDCK(ID3)
DDC Data Clock
P6-15
BE7
BLUE Data[MSB]-Even
P10-2
POLARITY +
BE6
BLUE Data
P10-3
POLARITY +
BE5
BLUE Data
P10-4
POLARITY +
BE4
BLUE Data
P10-5
POLARITY +
BE3
BLUE Data
P10-7
POLARITY +
BE2
BLUE Data
P10-8
POLARITY +
BE1
BLUE Data
P10-9
POLARITY +
BE0(EVEN)
BLUE Data[LSB]-Even
P10-10
POLARITY +
GE7
GREEN Data[MSB]-Even
P10-12
POLARITY +
GE6
GREEN Data
P10-13
POLARITY +
GE5
GREEN Data
P10-14
POLARITY +
GE4
GREEN Data
P10-15
POLARITY +
GE3
GREEN Data
P10-17
POLARITY +
GE2
GREEN Data
P10-18
POLARITY +
GE1
GREEN Data
P10-19
POLARITY +
GE0(EVEN)
GREEN Data[LSB]-Even
P10-20
POLARITY +
RE7
RED Data[MSB]-Even
P10-22
POLARITY +
RE6
RED Data
P10-23
POLARITY +
RE5
RED Data
P10-24
POLARITY +
RE4
RED Data
P10-25
POLARITY +
RE3
RED Data
P10-27
POLARITY +
RE2
RED Data
P10-28
POLARITY +
RE1
RED Data
P10-29
POLARITY +
RE0(EVEN)
RED Data[LSB]-Even
P10-30
POLARITY +
DCLK
Data Clock
P9-2
DENA
Data Enable
P9-4
POLARITY -
VD
Vertical Synchronizing Signal
P9-6
POLARITY +
HD
Horizontal Synchronizing Signal
P9-8
POLARITY +
BO7
BLUE Data[MSB]-Odd
P9-12
POLARITY +
BO6
BLUE Data
P9-13
POLARITY +
BO5
BLUE Data
P9-14
POLARITY +
BO4
BLUE Data
P9-15
POLARITY +
BO3
BLUE Data
P9-17
POLARITY +
BO2
BLUE Data
P9-18
POLARITY +
BO1
BLUE Data
P9-19
POLARITY +
BO0
BLUE Data[LSB]-Odd
P9-20
POLARITY +
GO7
GREEN Data[MSB]-Odd
P9-22
POLARITY +
GO6
GREEN Data
P9-23
POLARITY +
GO5
GREEN Data
P9-24
POLARITY +
GO4
GREEN Data
P9-25
POLARITY +
GO3
GREEN Data
P9-27
POLARITY +
GO2
GREEN Data
P9-28
POLARITY +
GO1
GREEN Data
P9-29
POLARITY +
- 10 -

Symbol
Signal Name
Location
Notes
GO0 GREEN Data[LSB]-Odd P9-30 POLARITY +
RO7
RED Data[MSB]-Odd
P9-32
POLARITY +
RO6
RED Data
P9-33
POLARITY +
RO5
RED Data
P9-34
POLARITY +
RO4
RED Data
P9-35
POLARITY +
RO3
RED Data
P9-37
POLARITY +
RO2
RED Data
P9-38
POLARITY +
RO1
RED Data
P9-39
POLARITY +
RO0
RED Data[LSB]-Odd
P9-40
POLARITY +
TEST
Test Signal Out(*)
P9-43
TEST
Test Signal Out(*)
P9-44
TEST
Test Signal Out(*)
P9-45
+12V
for Output Voltage (+)
P3-1
VR1,2
for Contrast Volume
P3-3,4
ON=5V
for Back-Light Control
P3-5
H: Light ON
VR1,2
Brightness Control
P5-1,3
VRC
Brightness Control
P5-2
MENU
Menu Key Input
P2-1
SEL
Select Key Input
P2-2
DOWN
Down Key Input
P2-3
UP
Up Key Input
P2-4
LED R
LED/RED, Control Signal
P2-6
LED G
LED/GREEN, Control Signal
P2-8
* : This terminal must be opened at System-side.
- 11 -

19
20
21

CAUTION
Parts marked as Are very important to secure safety.
In case of replacement, it is required to use designted parts for safety.
7-2 Parts List
REF NO.
PART No.
DESCRIPTION
Q'ty
NOTES
OUTER
(632 880 4986)
OUTER CARTON
1
(632 613 4436)
LABEL, BARCODE
1
INDIVIDUAL
(632 834 2815)
STYRO-FOAM CUSHION, R
1
(632 834 2839)
STYRO-FOAM CUSHION, L
1
(632 834 2891)
PAD, ACCESSORY
1
(632 297 9901)
POLYETHYLENE BAG, 450X425X380
1
FOR MONITOR
(632 607 4824)
POLYETHYLENE BAG, L180X270
1
FOR USER'S GUIDE
(632 298 2376)
POLYETHYLENE BAG, 120X320
1
FOR RGB CABLE
(632 607 4794)
POLYETHYLENE BAG, L120X230
2
FOR AC ADAPTER, AC CORD
(632 840 4056)
PAD, CUSHION
1
(632 840 3639)
PAD
1
ACCESSORY
(632 885 5698)
INSTRUCTION MANUAL, ENGLISH
1
(632 887 4460)
INSTRUCTION MANUAL, GERMANY
1
CABINET1
1
(632 888 6302)
CABINET ASS'Y, 150AT
1
8
(632 888 6319)
BOTTOM LID ASS'Y, 150T
1
18
(632 880 4993)
RATING PLATE
1
CHASSIS
4
(632 888 6333)
SHIELD CASE ASS'Y
1
STAND
10
(632 888 6388)
STAND ASS'Y
1
9
(632 832 1957)
COVER, STAND
1
CHASSIS ELC.
3
(632 888 6326)
LIQUID CRYSTAL DIS. ASS'Y
1
2
(632 825 8291)
FFC ASS'Y
1
7
(632 888 6364)
DC-AC INVERTER ASS'Y
1
16
(632 880 5488)
AC ADAPTER
1
17
(632 873 0926)
AC CORD
1
11
(632 850 6095)
POWER SWITCH ASS'Y
1
12
(632 888 8689)
WIRE HARNESS ASS'Y
1
13
(632 872 9494)
VGA CABLE, 1.5M
1
14
(632 872 9715)
USB CABLE, 1.5M
1
15
(632 883 7083)
AUDIO CABLE, 1.5M
1
PC BOARD 1
5
(632 888 6340)
PW BOARD ASS'Y, MAIN
1
PC BOARD 4
6
(632 888 6357)
PW BOARD ASS'Y, DC-IN
1
PC BOARD 5
20
(632 893 0456)
PW BOARD ASS'Y, AUDIO
1
PC BOARD 6
21
(632 893 0463)
PW BOARD ASS'Y, AUDIO/USB-IN
1
PC BOARD 7
19
(632 893 0470)
PW BOARD ASS'Y, USB
1
- 13 -

APPENDIX
Version of Firmware
The Version of Firmware is displayed on screen.
Turn the Power Switch to ‘OFF’. While pressing of the [SELECT] button, turn the Power
Switch to ‘ON’.
- 14 -