3
Sarspec, Lda. - Rua 28 de Janeiro, 350 – B2 4400-335 Vila Nova de Gaia
Phone: +351 223709107 | E-Mail: info@sarspec.com | w w w.sarspec.com
IMPORTANT SAFETY NOTE: Before operating this device, please read carefully this User Manual and
be familiar with its contents prior to using this equipment.
To help avoid potential serious injury to the user and/or damage this device, the user must:
Never look directly to the optical exit (UV and Infrared radiation danger). Radiation from
direct or reflected UV/infrared light may burn your skin and eyes. Use adequate eye
protection.
Do not open the equipment or contact the circuit board. This equipment works with high
voltage up to 600V.
Never touch the components or their connections. The printed circuit board is assembled
with electrostatically sensitive components.
Connect the system to the correct power source and with the proper optical fibers.
Do not spill liquids in the equipment or use it in damp or harsh environments.
Never use the equipment near flammable items.
Be aware about the danger of electrical shock if not used properly.
LS-XeF it’s a very compact and most complete solution for applications from ultraviolet to infrared,
with flashing light.
It includes a high radiant 6W Xenon lamp with a lifetime of more than 1x109 flashes, TTL Trigger in
for external control of the flash rate with the optional signal generator SG-XeF or with a
spectrometer and the Software LightScan, spectral range from 190 to 2000+ nm, internal and
external intensity control, and very low power consumption.
Its high stability and extended lifetime, together with its high energy per flash and very compact size,
makes LS-XeF the state of the art in Xenon Light Source presently in the market, as you can prove
yourself when start working with it.
