Satir CK350-VN User manual

CK350-VN
Trademark Acknowledgments
• SATIR is a trademark of SATIR Ltd.
• Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
Copyright © 2019 SATIR Ltd. All rights reserved.
User’s manual
EN
Temperature Monitoring

1 Brief introduction................................................................................ 1
2 Interface ............................................................................................. 2
2-1 Front View ............................................................................... 2
2-2 Bottom View............................................................................ 2
3 Connection ......................................................................................... 3
3-1 Connect to the camera............................................................. 3
4 Precaution and Maintenance .............................................................. 4
4-1 Precaution ............................................................................... 4
4-2 Maintenance............................................................................ 4
5 Accessories ......................................................................................... 5
6 Specification ....................................................................................... 6
Content

1
1 Brief introduction
The CK350-VN infrared thermal imaging system is based on our network
monitoring system over WAN or LAN. It can be configured as a
stand-a-lone monitoring system or can also be incorporated into existing
site systems which have an online monitoring system, digital image
system or security fire alarm system.
The package consists of dual-channel, all-weather monitoring cameras
(including high-performance infrared camera and visual CCD camera)
and the corresponding network of computers, allow users to combine
the infrared image on the CCD images to rapidly identify the fault
position.

2
2 Interface
2-1 Front View
2-2 Bottom View
Thermal camera
Visual camera
Mounting
Power input
RJ45 interface

3
3 Connection
3-1 Connect to the camera
This part will show you how to connect the camera.
Connect the camera and the computer to a router via LAN cable, and
then run the SatMonitor Net version in your computer to start to use the
camera.

4
4 Precaution and Maintenance
4-1 Precaution
Voltage
Input voltage of CK350-VN is 220V AC. It
would damage the camera if the voltage
exceeds the range.
Temperature
The working temperature range for
CK350-VN is -35℃to +50℃. Exceeding the
limit temperature may cause abnormalities.
Protection
Protect the camera from water. Do not
point the camera to the high temperature
object.
4-2 Maintenance
Camera Body
Clean the body with soft cloth or eyeglass
lens wiper.
Lens
First use a lens blower brush to remove dust
and dirt, and then remove any remaining dirt
by wiping the lens lightly with soft cloth.
•
Never use synthetic cleaners on the camera body or lens.

5
5 Accessories
List
Item
Amount
camera
1
AC adapter
2
LAN Cable
1
Pan-tilt
1
Calibrate report
1
User manual
1
Data CD
1
Warranty
1
Screws
6
CD Content
Dataload file
User manual

6
6 Specification
Model
CK350-VN
Image presentation
CCD Camera
640 x 480 full color
Detector type
UFPA
Resolution
384x288
Spectral range
8~14 μm
Thermal sensitivity
≤50mK@30℃
FOV / Min. focus distance
11°×8.2°/0.5m
Spatial resolution
0.5mrad
Measurement range
-20℃～ +250 ℃, up to 2000°C
Accuracy
±2℃/2%（readings）
Focus
software
Frequency
25Hz
Video record
software
Image record
software
Environment specification
Voltage
220VAC
Encapsulation
IP66
Operating temperature
-35℃to +50℃
Humidity
≤95%, non-condensing
Physical characteristic
Az range
0～360°
El range
-60°～+10°
Size
600x366x185mm
Weight
10KG（pan-tilt included）
Interface
RJ45
Real-time thermal video output

7