Saturn ST-EC0189 User manual

ST-EC0189
INDUCTION COOKER
ИНДУКЦИОННАЯ
ЭЛЕКТРОПЛИТА
ІНДУКЦІЙНА ЕЛЕКТРОПЛИТА

3
GB
INDUCTION COOKER
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices will become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.
If the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
Read this booklet thoroughly before
using and save it for the future.
IMPORTANT SAFEGUARDS
1. Read all instructions before using.
2. D o n o t d i s m a n t l e a n d r e f i t p a r t s o r
repair induction cooker yourself.
3. D o n o t c o n t a c t w i t h p l u g w i t h w e t
hands, when the cord is damaged
or plug is not inserted in place, do
not use the appliance.
4. Never bend or bind power cord or
apply excessive force to it,
otherwise it will be damaged, if
power cord is damaged, turn to an
authorized service center. To avoid
electric shock, do not replace power
cord by yourself.
5. Please use above 15A appropriate
electrical outlet, never use all-
purpose outlet and do not use the
appliance together with the other
one.
6. Place the unit on the stable surface
and keep at least 10 cm distance
between cooker body and adjacent
objects.
7. Never use the appliance in damp
surrounding or close to fire.
8. Never rinse the appliance with
water directly to avoid damaging.
9. Never use the appliance at the
place where children can reach it.
10. D o n o t c o o k w i t h o u t l o a d o r
overcook. Otherwise it will cause
the cooker deformation.
11. Metallic objects such as knives,
forks, spoons, lids should not be
placed on the hotplate since they
can get hot. Remove the cover
before canned food is heated, to
avoid the risk resulting from heat
expansion.
12. D o n o t c a r r y t h e a p p l i a n c e d u r i n g
operation.
13. D o n o t p u t p i n s a n d m e t a l w i r e a n d
foreign objects into air intake/vent.
14. Be careful, do not drop objects on
the hotplate, in case cracks occur,
turn off the power supply
immediately, unplug it from the
outlet and send it to repair.
15. Total weight containing using pan
and loaded food shall not exceed 4
kg, otherwise it will damage cooker
body.
16. Continuous operation time shall not
exceed 4h, if necessary please stop
for 30 min during operation period
and then continue to use.
17. D o n o t u s e t h e a p p l i a n c e o n c a r p e t
or tablecloth, otherwise it will jam
gas intake.
18. After cooking, high temperature
heat produced by pan will conduct
onto the appliance, never touch the
top hotplate immediately.
19. D o n o t u s e t h e a p p l i a n c e n e a r g a s
range or stove or in similar
surrounding.
20. When not in use, unplug the power
cord. During use high frequency
noise will be heard for it is resulted
from metal materials of pan, it is
not malfunction. If the pan is
moved slightly, the noise will
disappear, during use the running
sound of fan will be heard for the
fan will rotate sometimes to reduce
inner heat.
21. D o n o t p l a c e a s h e e t o f p a p e r
between the pot or the pan and the
unit. The paper may get burnt.
22. D o n o t p l a c e n e a r o b j e c t s w h i c h a r e
affected by magnet, such as:
radios, televisions, automatic-
banking cards.
23. This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
24. The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
25. Save these instr ions.
4
uct
Service life - 2 years

5
DESCRIPTION
B o t t o m c o v e r
C o n t r o l p a n e l
H o t p l a t e
T o p c o v e r
CONTROL PANEL
FUNCTION INSTRUCTION
1. Press “ ” button to start the unit.
LED display will show “00”.
2. Heating function setting: press
FUNCTION button once, LED will
displays corresponding P8 as the
default power is 1800W, and the
HEAT indicator will light up, it
means entering heating mode, and
power can be adjust by pressing
“” or “ ” button to the
following value: P1(400W)-
P2(600W)- P3(800W)- P4(1000W)-
P5(1200W)- P6(1400W)-
P7(1600W)-P8(1800W).
3. Warming function setting: press
FUNCTION button again, LED
displays H6 as the default
temperature is 240℃, and the
WARM indicator will light up, it
means entering warming mode, and
the warming temperature can be
set by pressing “ ” or “ ”
button to the following
value:H1(60℃)-H2(100℃)-
H3(140℃)-H4(180℃)-H5(220℃)-
H6(240℃).
4. Timer function setting: under mode
of HEAT or WARM, press TIME
button once to enter timer setting
which is used for setting the time to
shut off the power, at this time the
LED displays 10, the default time is
10 minutes.
1. Within 5s press “ ” or “ ”
button to set time, the
maximum set time is 99
minutes.
2. The “ ” and “ ” buttons can be
hold down to scroll through the
digits, or pressed and released
to advance one digit at a time.
Note: If the time is not adjusted
within 5s, the time setting will
be finished.
3. Press the TIMER button to
confirm the time, and buzzer
sound will be heard.
5. The unit will stop automatically
when no button is pressed within
2h.
OPERATION
1. Insert power cord into a separate
appropriate socket, and buzzer
sound will be heard once, LED
display will show “- -”, indicating
the unit is powered.
2. Place the pan on the center of the
hot plate.
3. Press “ ” button, LED display will
show “00”.
4. Press the FUNCTION button once,
LED display will show corresponding
setting, and at the time the fan
starts running, the default power of
left unit is P8 (1800W), which can
be adjusted by pressing “ ” or
“ ” button, the LED display
shows “E0” if the pan is not placed
in position and buzzer sound will be
heard at an interval of 3 second.
The appliance will return under the
standby mode immediately if you
place the pan in position within 60s,
if you do not place the pan in
position within 60s, after 60s, the
appliance will also return under
standby mode.
5. Press FUNCTION button again to
enter WARM setting. The default
temperature is 240°C, the LED
display shows “H6”，which can be
adjusted by pressing “ ” or “ ”
button, when the temperature rises
to the set value, the program will
enter the automatic protection.
Note: you can reset the function by
pressing FUNCTION button at any
time during operation.
6. Under mode of HEAT or WARM, you
can set the time to shut-off the
power by pressing TIME button.
1. After timing, power and time
will cycle to display. You can
adjust the power by pressing
6
“ ” or “ ” button.
2. After timing, press “ ” or
“ ” button to adjust the
temperature, temperature and
time will cycle to display.
Note: under timing shut-off mode,
the unit can be shut off by pressing
“ ”button, after being shut off,
the timing shut-off setting will be
cancelled, and at the next start the
previous set time will not be saved.
7. When time runs out, the unit will
stop operating automatically and all
indicators will be extinguished.
Note: the operation process can be
terminated at any time by pressing
the “ ” button. When cooking
program is ended the integrated
cooling fan will continue running for
60 seconds.
8. After cooking, unplug the mains
cord from the power outlet.
OPERATION PRINCIPLE
The operation principle of induction
cooker is achieved by the current
produced by magnetic field induction
which electron circuitry board produces
alternate magnetic field, when the pan
bottom containing metal material is
placed on the hotplate, the pan will
immediately cut the alternate magnetic
field and then the metal part of pan
bottom produces the current
(whirlpool), it makes iron molecule run
irregularly at high speed, following the
collision and friction between molecules
produce heat energy which makes the
appliance heat promptly, so that the
purpose of cooking food is achieved.
PRODUCT ADVANTAGE
1. High efficiency, saving energy and
environmental protection: cooker
body is heating part itself, so heat
efficiency is very high and save
energy greatly, when cooking food
with induction cooker, there is no
visible fire, smoke and waste gas,
bear environment protection effect,
safe and clean.
2. Wider applicable voltage range: the
unit can adjust automatically the
wattage according to the power
voltage, so that it avoids the
trouble resulting from voltage
fluctuation.
3. Perfect safety protection function:
the unit has safe protection function
for over voltage, lower voltage or
sudden voltage change. However
normal over temperature function is
quick and accurate.
4. Accurate and perfect inspection for
pan quality and no-load protection
function: the unit can inspect
whether the material or size of pan
is applicable. When the pan is
moved away, the unit stops heating
immediately and after 10s the
power is cut off. No matter how the
pan is moved away quickly or
slowly, it causes no damage to
induction cooker.
5. Start self-diagnosis function and 2h
timing shut-off function: it can
define whether induction cooker
operation are appropriate, that
induction cooker is not being
operated for long time and will be
considered forgotten, it will shut of
the power automatically after 2h,
so it makes using it safely.
6. Multi-section wattage adjustment
and multi-section temperature
control: convenient and agile use,
in addition temperature control
compensation feature makes
setting the temperature more
exact.
7. Multi-heating function: perform
different cooking demand according
to different power.
SAFETY PROTECTION EQUIPMENT
1. Over voltage protection and lower
voltage protection. When power
voltage is too high or low, induction
cooker will compensate voltage
automatically and adjust output
power.
2. Small metal part protection. For
small iron metal parts which
diameter is less than 80mm, no
power is outputted to avoid
abnormal heating.
3. No pan or improper pan protection.
When no utensil is placed on the
hotplate or the utensil is deviated
greatly from the center, or the
material of the utensil is not
applicable, the power will not be
output and buzzer sound will be
heard to alert until appropriate
utensil is put in place.
4. Over temperature protection.
When the temperature of top
hotplate is too high, induction
cooker will stop automatically
power output and long buzzer
sound will be heard to alert until
the temperature returns to normal.

7
5. High voltage pulse protection.
During operation, when power
supply receives a transient high
voltage pulse (such as lightning
strike), induction cooker will stop
automatically and in a minute will
resume automatically.
COOKING UTENSIL SELECTION
1. Useable pans.
Steel or cast iron, enameled iron,
stainless steel, flat-bottom
pans/pots with diameter more than
18.5cm.
2. Non-usable pans.
Heat-resistant glass, ceramic
container, copper, aluminum
pans/pots. Round-bottom pans/pots
with bottom diameter less than
18.5cm.
CARE AND MAINTENANCE
1. Please unplug from power outlet
before care and maintenance.
2. When ceramic hotplate is dirty,
wipe it with wet cloth, or after wipe
it with detergent or burnishing
powder, clean it with wet cloth.
3. Wipe unit body and control panel
with soft and wet cloth, neutral
cleanser may be used for firm oil
stain, and then wipe the remained
residue with soft and wet cloth.
4. Never rinse directly with water or
immense it in water.
5. Keep the unit clean regularly to
prevent black beetle entry into the
fan so that the unit will fail, the
surface of air intake and vent may
be cleaned (such as dust, smear)
with cotton bar, a little detergent
added on the toothbrush may be
used for cleaning.
CONTRAST CHART OF THERMAL
EFFICIENCY (based on 1l water)
Cook-
er
type
Time
Gas(or
electrici
-ty)
consum
ption
Thermal
effi-
ciency
Induc
-tion
cook-
er
6.7mi
n
0.2
kw/h
93%
Gas
cook-
er
8
min
0.05
kg
50%
Electr
-ic
cook-
er
12
min
0.345
kw/h
47%
TROUBLE SHOOTING
If the problem occurs during operation, please make the check according to the
following table before returning it to repair.
TROUBLE
CHECKING POINT
When plug is inserted into the
power outlet, a beep sound will
not be heard and the indicator
will not be lighted when
pressing POWER button
Whether the plug is removed from the outlet.
Whether power switch or fuse in your home is cut
off
Whether power is cut off
Continuous 15s beep sound will
be heard and then the unit stop
operating.
Whether the pan is proper
Whether the pan is centered on the hotplate
Whether the bottom diameter of the pan is more
than 18.5cm
The unit stops heating suddenly
during use
Whether ambient temperature is very high
Whether air intake or vent is jammed
It means reaching the set temperature when the
unit is at TEMP state
Protection equipment may operate, confirm it after
waiting from several to 10 minutes
8
The temperature cannot be
controlled when frying or
grilling food.
Whether the pan bottom is concavo-convex or the
bottom center is concave
Whether power indictor is lighted
The induction cooker will stop heating if the following malfunctions occur, after 3s, the
display will show the malfunction alarm, the malfunction code will show on the center of
display, you can clear the display by pressing the switch button, and the appliance will
enter the standby mode.
DISPLAY
DIRECTION
E0
check whether the pan is in place
E1
the circuit is malfunctioned
E2
the temperature sensor is open-circuited or short-circuited
E3
the voltage is higher (260V-275V) for 3s
E4
the voltage is lower (165V-190V) for 3s
E5
the cooker surface temperature is higher
E6
IGBT temperature is higher than 95℃for 3s
E7
the IGBT temperature sensor is open-circuited or short-circuited
CIRCUIT
DIAGRAM