Savox BTR-155 User manual

BTR-155 Setup
Guide - ESChat

1. Volume + button –increase volume
2. Volume − button – decrease volume
3. Multifunction (MF) button –Power
on/off, pairing, answer/end/reject calls
Savox Promate RSM
4. USB charger connector
5. Audio connector
6. Microphone
7. Push-To-Talk button
8. Indicator light –status indication
(blue, red, green, purple and yellow)
9. Speaker
10. Clothes clip
94
83
5
6
7
10
12

Product Instructions
Power off
»When the device is on, press and hold
the MF button for 3 seconds.
»Purple light flashes once and the
device turns off.
PTT calls
»Press and hold the PTT button to
make a PTT calls.
Pairing
»When the device is off, press and hold
the MF button for 5 seconds.
»Blue and red light flash alternately.
»To complete the pairing, follow the
instructions in your radio or mobile
phone user guide.
»Select “Savox BTR-155 a” and use
the passcode 0000.
Power on
»When the device is off, press and hold
the MF button for 2 seconds.
»Purple light flashes once and the
device turns on.
»**When powered on for the first time,
the device goes to pairing mode
automatically.

Product Instructions
Light indicators
Savox Promate RSM uses a Tri-color LED light (blue, red and green).
It shows as purple when blue and red turn on at the same time.
Different light combinations represent different statuses.
Battery low:
Yellow light flashes. Charging battery: Red light on. Charging completed: Red light turns off. Powering off: Purple light flashes once.
Device turn off.
Powered, not connected:
Purple light flashes once.
Red light flashes.
Connected:
Blue light flashes Pairing mode: Blue & red light flash
alternately.
Active phone call:
Green light flashes.

Product Instructions
Pair the unit to your handset following the instructions in your mobile phone user guide.
Once paired, within ESChat’s setting make the following changes:
Allow Bluetooth: Select the Headset Sound
profile and Headset Type: Select Bluetooth w/ PTT:
Your Savox BTR-155 will now work with ESChat.