Saxxon BVF424S Series User manual
BVF424S Series Color
Camera
Weatherproof Day& Night IR Color
Camera
Specification
Modelo BVF424S
Tamaño del CCD 1/3″ CCD
Elementos de imagen
efectivos
( H*V )
NTSC:510×492, PAL:500×582
Resolución Horizontal 420 TVL
Proporción S/N Más que
48dB
Frecuencia de reloj
(MHZ) NTSC:19.0699 , PAL:18.9375
Sistema de Escaneo 2:1 Entrelazado
IIuminación mínima 0 Lux (con el IR LED encendido)
Sistema Síncrono Sincronización interna, Negativo.
Obturador NTSC:1/60s~1/100,000s,PAL:1/50s~1/100,000s
Característica Gamma 0.45
IR Distancia 30 metros (con 36 Unidades LED Infrarrojos)
Estado IR Bajo 10 Lux por CDS
Encendido IR CDS Auto Control
Salida de Vídeo 1Vpp,75 Ω
Control automático de
ganancia Auto
Voltaje / Corriente 12VDC(±10%)/ 400mA
Lente 2.8-12 mm
Resistencia al agua IP66
Dimensiones (mm) 228(W)×97(H)×84(D)
Peso (g) 530
Temperatura de
almacenamiento -30~ +60 Humedad Relativa 95% Max
Temperatura de
funcionamiento -10~ +50 Humedad Relativa 95% Max
Packing List
No Name NumberModel
1. WeatherProof Day&Night IR Camera
1BVF424S
2. User Guide 1BVF424S
Series
Notes:Before providing power for the
camera, please read this User Guide in
detail!
Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.
Distribuidor:
TVCenlinea.com
INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits BVF424S series product.
We adopt the latest technical of sensor and driver. The
most attractive characteristics are water-resistant, and
widely applicable to day & night, indoor & outdoor. In addi-
tion, it owns the characters of high definition and stability,
strong anti-jamming, rich and real color. Fixing and using
this model are convenient too. It is very good for you to
apply to yours CCTV system.
Please read this instruction manual carefully to en-
sure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
* Sensor (CCD)
Adopt COLOR 1/3"CCD sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
* Gamma Characteristic
Camera Gamma characteristic is 0.45.
* Scanning Mode
NTSC or PAL mode.
* Night-time Vision
0 Lux with IR LED ON. Adopt TaiWan high quality IR
LED, having very good night-vision effect.
DC12V Power Supply
Monitor
TROUBLE AND SOLUTION
Link wire rule：
Power
Video
Note:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high
or too low temperatures. The operating temperature is -10℃-
50℃. (Recommendatory operating temperature is -5℃--40℃.)
● Never make the camera face the sun or bright object. Other-
wise, it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
into water too long time directly.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to consti-
a risk of electric shock to persons.
Notes：
●The power supply must through safe attestation. Its output voltage、
current、voltage polarity and operating temperature must match the
camera’s requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.
BVF424S
