SBC SBC-110 User manual
Users Manual
Single-line Caller ID Phone
SBC-110
For problems with installation or operation, visit our web site at
www.sbctelephones.com or call 800-400-5156
© 2006 Grace Digital Inc., All rights Reserved SBC is a trademark of AT&T Knowledge Ventures, L.P, Licensed to Grace Digital Inc.
FCC Registration Information
9OURTELEPHONEEQUIPMENTISREGISTEREDWITHTHE&EDERAL#OMMUNICATIONS#OMMISSIONANDISINCOMPLIANCEWITHPARTSAND
&##2ULESAND2EGULATIONS
£°Ê ÌwV>ÌÊÌÊÌiÊV>Ê/ii«iÊ«>Þ
/NTHEBOTTOMOFTHISEQUIPMENTISALABELINDICATINGAMONGOTHERINFORMATIONTHE&##2EGISTRATIONNUMBERAND2INGER
%QUIVALENCE.UMBER2%.FORTHEEQUIPMENT9OUMUSTUPONREQUESTPROVIDETHISINFORMATIONTOYOURTELEPHONECOMPANY4HE
2%.ISUSEFULINDETERMININGTHENUMBEROFDEVICESYOUMAYCONNECTTOYOURTELEPHONELINEANDSTILLHAVEALLOFTHESEDEVICESRING
WHENYOURTELEPHONENUMBERISCALLED)NMOSTBUTNOTALLAREASTHESUMOFTHE2%.SOFALLDEVICESCONNECTEDTOONELINESHOULD
NOTEXCEED4OBECERTAINOFTHENUMBEROFDEVICESYOUMAYCONNECTTOYOURLINEASDETERMINEDBYTHE2%.YOUSHOULDCONTACT
YOURLOCALTELEPHONECOMPANY
ÌiÃ
s4HISEQUIPMENTMAYNOTBEUSEDONCOINSERVICEPROVIDEDBYTHETELEPHONECOMPANY
s0ARTYLINESARESUBJECTTOSTATETARIFFSANDTHEREFOREYOUMAYNOTBEABLETOUSEYOUROWNTELEPHONEEQUIPMENTIFYOUAREON
APARTYLINE#HECKWITHYOURLOCALTELEPHONECOMPANY
s.OTICEMUSTBEGIVENTOTHETELEPHONECOMPANYUPONPERMANENTDISCONNECTIONOFYOURTELEPHONEFROMYOURLINE
Ó°Ê,}ÌÃÊvÊÌiÊ/ii«iÊ«>Þ
3HOULDYOUREQUIPMENTCAUSETROUBLEONYOURLINEWHICHMAYHARMTHETELEPHONENETWORKTHETELEPHONECOMPANYSHALLWHERE
APPLICABLENOTIFYYOUTHATTEMPORARYDISCONTINUANCEOFSERVICEMAYBEREQUIRED7HEREPRIORNOTICEISNOTPRACTICABLEANDTHE
CIRCUMSTANCESWARRANTSUCHACTIONTHETELEPHONECOMPANYMAYTEMPORARILYDISCONTINUESERVICEIMMEDIATELY)NCASEOFSUCH
TEMPORARYDISCONTINUANCETHETELEPHONECOMPANYMUSTPROMPTLYNOTIFYYOUOFSUCHTEMPORARYDISCONTINUANCEAFFORD
YOUTHEOPPORTUNITYTOCORRECTTHESITUATIONANDINFORMYOUOFYOURRIGHTTOBRINGACOMPLAINTTOTHE#OMMISSIONPURSUANT
TOPROCEDURESSETFORTHIN3UBPART%OF0ART&##2ULESAND2EGULATIONS4HETELEPHONECOMPANYMAYMAKECHANGESINITS
COMMUNICATIONSFACILITIESEQUIPMENTOPERATIONSOFPROCEDURESWHERESUCHACTIONISREQUIREDINTHEOPERATIONOFITSBUSINESSAND
INCOMPLIANCEWITH&##2ULESAND2EGULATIONS)FTHESECHANGESAREEXPECTEDTOAFFECTTHEUSEORPERFORMANCEOFYOURTELEPHONE
EQUIPMENTTHETELEPHONECOMPANYMUSTGIVEYOUADEQUATENOTICEINWRITINGTOALLOWYOUTOMAINTAINUNINTERRUPTEDSERVICE
ÌiÀviÀiViÊvÀ>Ì
4HISDEVICECOMPLIESWITH0ARTOFTHE&##2ULES/PERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS4HISDEVICEMAY
NOTCAUSEHARMFULINTERFERENCEAND4HISDEVICEMUSTACCEPTANYINTERFERENCERECEIVEDINCLUDINGINTERFERENCETHATMAYCAUSE
UNDESIREDOPERATION4HISEQUIPMENTHASBEENTESTEDANDFOUNDTOCOMPLYWITHTHELIMITSFORA#LASS"DIGITALDEVICEPURSUANTTO
0ARTOFTHE&##2ULES4HESELIMITSAREDESIGNEDTOPROVIDEREASONABLEPROTECTIONAGAINSTHARMFULINTERFERENCEINARESIDENTIAL
INSTALLATION4HISEQUIPMENTGENERATESUSESANDCANRADIATERADIOFREQUENCYENERGYANDIFNOTINSTALLEDANDUSEDINACCORDANCE
WITHTHEINSTRUCTIONSMAYCAUSEHARMFULINTERFERENCETORADIOCOMMUNICATIONS(OWEVERTHEREISNOGUARANTEETHATINTERFERENCE
WILLNOTOCCURINAPARTICULARINSTALLATION)FTHISEQUIPMENTDOESCAUSEHARMFULINTERFERENCETORADIOORTELEVISIONRECEPTIONWHICH
CANBEDETERMINEDBYTURNINGTHEEQUIPMENTOFFANDONTHEUSERISENCOURAGEDTOTRYTOCORRECTTHEINTERFERENCEBYONEORMORE
OFTHEFOLLOWINGMEASURES
s2EORIENTORRELOCATETHERECEIVINGANTENNATHATISTHEANTENNAFORRADIOORTELEVISIONTHATIShRECEIVINGvTHEINTERFERENCE
s2EORIENTORRELOCATEANDINCREASETHESEPARATIONBETWEENTHETELECOMMUNICATIONSEQUIPMENTANDRECEIVINGANTENNA
s#ONNECTTHETELECOMMUNICATIONSEQUIPMENTINTOANOUTLETONACIRCUITDIFFERENTFROMTHATTOWHICHTHERECEIVINGANTENNAISCONNECTED
)FTHESEMEASURESDONOTELIMINATETHEINTERFERENCEPLEASECONSULTYOURDEALERORANEXPERIENCEDRADIOTELEVISIONTECHNICIANFOR
ADDITIONALSUGGESTIONS
i>À}Ê`Ê«>ÌLÌÞ
4HISTELEPHONESYSTEMMEETS&##STANDARDSFOR(EARING!ID#OMPATIBILITY
v. 5.22.06
1
Table Of Contents
FCC Registration Information................................................................................Inside Cover
Feature List ............................................................................................................................... 2
Safety Instructions.................................................................................................................... 3
Introduction.............................................................................................................................. 4
Wall Mounting Instructions..................................................................................................... 5
Location Controls ..................................................................................................................... 6
Function Buttons...................................................................................................................... 7
Function Operations .............................................................................................................. 10
Caller ID Call Waiting............................................................................................................. 14
Receiving Call Records ........................................................................................................... 15
Reviewing Display Messages ................................................................................................. 15
Message Waiting
Total & New Calls
Private
Repeat Calls
End of List
Out of Area
Low Battery Indicator
Caller ID System Operations .................................................................................................. 16
Troubleshooting ..................................................................................................................... 17
Warranty................................................................................................................................. 18
2
Message waiting indicator*
Caller ID with Caller ID call waiting*
Adjustable volume control
Adjustable ringer control
FSK system for message waiting notification (VMI)
CID type II for caller/call waiting Caller ID*
99 number/name in Caller ID history*
15 number outgoing call in memory
70 name/number phonebook
Programmable one-touch Voice Message retrieve button*
10 number memory dial function
Backlit LCD with contrast control
Real time clock with date & time (automatically synchs with Caller ID*)
New call indicator
LCD contrast setting
Area code setting
Multiple language selection
Low Battery indicator
Last number redial
Flash, Pause, Mute
Tone/Pulse Dialing
Call Timer
* function requires subscription to telephone company service
Feature List
3
To reduce the risk of fire, electrical shock, and injury, please follow these basic safety
precautions before you use this equipment.
1. Carefully read the instructions in this manual.
2. Follow all warnings and instructions marked on the unit.
3. When cleaning, unplug the telephone jack from the wall outlet. Use a damp
cloth. Do not use liquid or aerosol cleaners.
4. Do not use this equipment near water e.g.: near a sink, bathtub, swimming pool
or in a wet basement.
5. Install in a protected location. Ensure all lines and cords are away from foot traffic.
Do not place objects on the line cord that may cause damage or abrasion.
6. Avoid spilling any liquid on the unit. This may cause internal shorting, fire or
shock. The phone is not covered for damage from liquids under your warranty.
7. Never push objects of any kind into the telephone as they can touch dangerous
voltage points or short out parts that could result in a risk of fire or electrical shock.
8. Take the phone to a qualified technician when it requires repair work or service.
To reduce the risk of electrical shock, do not disassemble the telephone. Opening
or removing covers can expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electrical shock during subsequent use.
9. Avoid using the telephone during an electrical storm. There can be a slight risk of
electrical shock from lightning.
10. Do not use the telephone to report a gas leak, if in the vicinity of the leak.
11. Unplug this telephone from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
•Ifliquidisspilledintotheunit.
•Iftheunitisexposedtorainorwater.
•Iftheunitdoesnotoperatenormallybyfollowingtheoperatinginstructions.
•Iftheunitisdroppedorthecasingisdamaged.
•Iftheunitexhibitsadistinctchangeinperformance.
12. Do not recharge the batteries or dispose them in fire.
13. To avoid pollution to the environment, be sure to dispose of batteries properly.
Safety Instructions
4
Congratulations on the purchase of your new telephone. It has been manufactured to
very high quality standards for convenient and reliable service. This telephone can be
used with “Call Identification (Caller ID) Service” and/or “Call Waiting Caller ID Service”
that is provided by your local telephone company. There is a fee for these services by your
local telephone company, and they may not be available in all areas. When used with
these services, your telephone displays the telephone number or the telephone number
and name of each caller before you answer the call allowing you to screen your calls.
In addition to Caller ID services, if you subscribe to voice mail services from your local
telephone company, voice mail waiting indicators will inform you that there is a message
waiting in your voice mailbox.
CHECK THE CONTENTS OF THE BOX
Box should contain:
• Handsetwithhandsetcordandphonebase
• Telephonelinecord
• ThreeAAAsize1.5Vbatteries
• User’smanual
• PowerAdapter
BATTERY INSTALLATION
The Caller ID phone requires three 1.5V R6P SUM-3 SIZE AAA batteries for LCD display.
1. Remove the battery cover from the back of your Caller ID phone.
2. Insertthree1.5VAAAsizebatteriesbyobservingthe+/-polaritymarkedinthe
battery compartment.
3. Replace battery compartment cover.
CONNECTING PHONE LINE CORDS
Plug one end of the supplied telephone line cord into the line jack. Then plug the other
end into telephone line jack. Plug in the AC power adapter into a power outlet and the
plug the other end into 9VDC jack.
BASIC CONNECTION DIAGRAM
Introduction
5
Wall Mounting Instructions
The unit can be mounted to any wall surface using two self-tapping screws (not
supplied). Follow the instructions.
1. Install two self-tapping screws at a distance of 83mm (3.27”) from each other and
located on a vertical center line. (See Figure 1)
2. Tighten each screw just enough to allow the wall mounting bracket enough
clearance to slip snugly over each screw head.
3. Disconnect the base stand from the desktop use position and snap it into the wall
mounting position as shown in figure 2 and 3.
4. To install as a wall unit.
a. Align the holes on the back of the telephone mounting plate with the heads of
the self tapping screws.
b. Slowly slide the unit down until it snaps into place as shown in figure 4.
5. Fordesktopuse,thebasestandcanbeleftinit’soriginalpositionasshownin
figure 5.
MM
v
ERUGI&
&IGURE
&IGURE
&IGURE &IGURE
$ESKTOP
6
Location Of Controls
1. Message Waiting lamp
2. MENU button
3. DELETE button
4. SAVE button
5. FLASH button
6. ENTER/ DIAL button
7. or button (Up and Down)
8. Handsetvolumeswitch
9. MESSAGE button
10. REDIAL / PAUSE button
11. END CALL button
12. Ringer volume switch
13. Telephone jack
14. 9VDC power jack
15. Handsetjack
1
2
3
5
10
6
11
4
7
9
8
13
14
12
15
7
Message Waiting Lamp
If you subscribe to “Voice Messaging” (a service offered by your telephone
company) this lamp will flash whenever a new message is on the system. This light
should stop flashing after the call is retrieved.
MENU Function
Use this button to access a variety of the phones functions displayed on the LCD.
DELETE Function
Use this button to delete an entry or to exit from a menu.
SAVE Function
Use this button to save numbers to your phone book feature.
ENTER/DIAL Function
Use this key to enter new phonebook records or to dial a number from the Caller ID or
Dialed Call records.
Buttons Function
Use these buttons to scroll through menu functions, Caller ID and Dialed Call records.
MESSAGE Function
If you subscribe to “Voice Messaging” (a special telephone service provided by your
local telephone company), this function will operate in the following manner:
When the indicator is displayed on the LCD and the “Message Waiting” lamp
Is on, you can press the MESSAGE button to connect to your “Voice Messaging”
service. When pressed, the phone will automatically dial *98 (this is the default),
which is the code to access “Voice Messaging” in many areas.
NOTE - If dialing *98 does not access your “Voice Messaging” service, then you
can follow the instructions below to reprogram the MESSAGE button to dial your
”Voice Messaging” retrieval number.
To store a different access number or to restore the access number to the MESSAGE
button, do the following:
1.In the on-hook state enter your access number.
2.Press and hold the MESSAGE button until the LCD shows “SAVE OK”.
Functions
Please note: when the phone is in the cradle, pressing MENU will activate the menu
functions. When the phone is out of the cradle (off-hook), pressing MENU will display
the Caller ID log.
8
REDIAL Function
The phone supports 2 redial functions:
1. Last Number Redial – to redial the last dialed number, pickup the handset and press
REDIAL/PAUSE button. The phone will automatically redial the last number dialed.
2. Memory Redial – the phone stores the last 15 dialed calls. To dial a call from
memory, with handset on-hook, press the REDIAL/PAUSE button and use the
and buttons to scroll through the dialed call records. When the number you
want to redial is displayed, pick up handset and the number displayed on the LCD
will be dialed.
PAUSE Function
Use this function when a delay is needed in an automatic dialing sequence. For
example, when you must dial a 9 to get an outside line or when you enter codes to
access your long distance company. A pause may also be stored in AUTO DIAL and
other memory dial entries.
FLASH Button
If you subscribe to “Call Waiting” (a special telephone service) the FLASH button is
used to connect the line to another incoming call or to establish a dial tone to make
another call while still connected to the initial caller.
Note: If you do not subscribe to Call Waiting, pressing the FLASH button during a
call will disconnect the current call.
END CALL Function
Pressing the END CALL button ends the current call and returns to a dial tone.
Phone Book Function
You can store 70 numbers and names in the phone book, refer to the “FUNCTION
OPERATIONS”,underthe“PHONEBOOK”sectionfordetails.
Ringer Volume Switch
YoumayadjusttheringervolumebyselectingHI/LOW/OFFfromtheswitchlocatedonthe
underside of the base.
Volume Function
You may adjust the handset volume by selecting either the Loud or Normal from the
switch on the right side of the phone.
Functions
9
MEMORY DIAL FUNCTION
To save a memory dial number:
1. While in the on-hook state, press and hold the SAVE button. The LCD will display “-->”.
2. Enter the phone number.
3. Press the SAVE button. The LCD will display “-->?”.
4. Press one of the 0-9buttons. The LCD will display “Save OK” then revert to the main
menu after a few seconds.
To call a memory dial number:
1. While in the on-hook state, press and hold the 0-9button for the number you wish to
dial until the LCD displays the number.
2. Pick the handset off the hook.
3. The number you chose will be dialed.
Functions
10
Function Operations
To access the function settings of this phone, press the MENU button and use the or
buttons to select a function. NOTE: The phone must be in the on-hook position to access the
MENU mode settings.
ThesettingsequenceisPHONEBOOK-CALLWAITING-DATEFORMAT-HOURFORMAT-SET
FLASH-SETAREACODE-SETLANGUAGE-SETTIME-DIALMODE-LCDCONTRAST-BACK
LIGHT.Afterselectingthedesiredfunction,presstheENTER/DIAL button to review or change
settings. When complete, press the MENU button to exit.
PHONE BOOK
To add number and name to the phone book:
1. Press the MENUbuttontoselectthePHONEBOOKmenuthenpress
ENTER/DIAL; the LCD will show: “REVIEW >>”. Press the or button to
select the ADD >> menu, then press the ENTER/DIAL button to enter the
functionforaddingnameandnumbertothePHONEBOOK.
2. Using the keypad, enter the phone number. To delete a number incorrectly
entered, press the DELETE button to delete the incorrect digit(s) and
reenter the correct digit(s). NOTE: the maximum number of digits that
can be entered is 20; if the number exceeds 20, the LCD will show “TOO
LONG” and the exceeding digits will not be stored.
3. After finishing the number setting, press and hold the ENTER/DIAL button
to enter the name setting (the cursor will move to the next line), then press
the appropriate keys to get the following characters:
If the next character is on the same button as the previous one, you press
the ENTER/DIAL button before entering the same letter again. NOTE: To
add a space between names press ENTER/DIAL-TWICE.
4. When the setting is completed, press and hold the ENTER/DIAL button to
store the record and go on to the next phone number you want to enter.
To review the number/name in phone book:
1. With the phone on-hook, press the MENU button to select the
PHONEBOOKmenu,thenpressENTER/DIAL, the LCD will show “REVIEW
>>”. Press the ENTER/DIAL button to enter the function of reviewing the
name/number. Use the or button to review. You can also quickly review
the list by the first letter of the name. When pressing the first letter of the
name, the LCD will display the matching name(s), then use the or
button to select the right one.
11
2. With the phone on-hook, you may directly access the phonebook by pressing the
number 1plus #. The LCD will show the first name/number entry in the phone
book. Use the or button to scroll to the desired name/number. The contact
displayed in the LCD can be automatically dialed by picking up the handset.
NOTE: If the number is more than 13 digits, an arrow will show on the bottom
right of LCD, press or button to review the other digits, press the or
button again to review the next number.
To speed dial the number from the phone book:
Off Hook - With the phone in the off-hook state, press MENU then use
the or button to select the name/number you want. When the LCD
displays the contact you want to call, press the ENTER/DIAL button.
On-Hook - Press the number 1plus #, use the or button to select the
contact you want to call. When the name/number is displayed, pick up the
handset and the phone will automatically dial the number.
To delete a single entry in the phone book:
During the reviewing process, use the or button to select the number
you want to delete, press the DELETE button once, the LCD shows
“DELETE?” Press the DELETE button again to delete it.
BACK LIGHT/OFF HOOK LIGHT SETTING
Press the MENU button, using the or scrolltoBACKLIGHT-pressENTER/DIAL. Press
the or buttontoselecteitherBACKLIGHTTIMEorOFFHOOKLIGHT.
To adjust BACK LIGHT time: The phone features a backlight LCD that is illuminated
wheneveryoutouchakeyorremovethehandset.WhentheLCDshows“BACKLIGHT
TIME”. Press ENTER/DIAL and then the or button to select the time you would like the
BACKLIGHTtoremainilluminated,orselectBACKLIGHTOFFifyoudonotwanttheLCDto
illuminate. Press the ENTER/DIAL button to confirm.
To adjust OFF HOOK light time:WhileintheBACKLIGHTmodepress or and the
LCDwilldisplay“OFFHOOKLIGHT”-WhentheLCDshows“OFFHOOKLIGHT”.Press
the ENTER/DIAL then or buttontoselectifyouwouldliketheBACKLIGHTtoremain
illuminatedALLTHETIMEorFORSECONDS(timechosenfortheBACKLIGHTtime).After
selecting, press ENTER/DIAL to confirm, then press MENU to exit.
LCD CONTRAST SETTING
The phone features an LCD contrast control which can be adjusted for optimum viewing
depending on phone angle and lighting. To change, press the MENU button, using the
or scroll to LCD CONTRAST - press ENTER/DIAL. The LCD shows “SET CONTRAST XX”.
Press the or button to select the LCD contrast (up to 16 levels for choosing), press the
ENTER/DIAL button to confirm, press MENU to exit.
Function Operations
12
Function Operations
TIME SETTING
If you have subscribed to Caller ID, the date and time will be automatically set when the
first call is received. To set the time manually follow the instructions below:
Press the MENU button, using the or scroll to SET TIME - press ENTER/DIAL, then
using the keypad, enter the correct time, date and day of week. Press the MENU button
to exit.
The setting sequence is hours - minutes - month - date - year - day of week.
After the year setting, the cursor for day of week will flash, you can use the or button
to activate/deactivate this setting. If the flashing cursor is active, the day of week will set
automatically, or if deactivated, the LCD will only show the “TOTAL CALLS XX” in the
standby state.
DIAL MODE
Press the MENU button, using the or scroll to DIAL MODE, then press ENTER/DIAL
button to confirm. Use the or button to select between “DTMF” and “PULSE”, then
press ENTER/DIAL button to confirm.
LANGUAGE SELECTION
The phone supports multiple languages. Press the MENU button, using the or
scroll to SET LANGUAGE - press ENTER/DIAL to enter the language setting, then
press the or button to select the language. Press the ENTER/DIAL button to
confirm and exit.
AREA CODE SETTING
When you use this phone for the first time, or move to an area that has a different
area code, you must enter your area code. This is necessary because the phone
must distinguish local or long distance calls to properly dial calls from the Caller ID
list and phonebook.
1. Press the MENU button, using the or scroll to SET AREA CODE - press
ENTER/DIAL button.
2 LCD will Display “SET AREA CODE”.
3. Using the keypad dial buttons, enter your area code.
4. When the three-digit area code setting has been completed (for example: if your
areacodeis858thedisplaywillshow‘858’)thenpressENTER/DIAL to confirm.
5. Press MENU to exit.
FLASH TIME SETTING
Press the MENU button, using the or scrolltoSETFLASH-pressENTER/DIAL
button and the current flash time will show on the LCD. Use the or button
to change the flash time (100ms/120ms/300ms/600ms). Press ENTER/DIAL to
confirm and press MENU to exit.
13
Function Operations
HOUR FORMAT SETTING
Press the MENU button, using the or scrolltoHOURFORMAT-pressENTER/
DIAL and the current time format will be displayed. Press the or button to
makeaselection(24HOUR/12HOUR).PresstheENTER/DIAL button to confirm
and the MENU button to exit. Note - If you subscribe to the Caller ID service, the
Caller ID will automatically set time and date.
DATE FORMAT SETTING
Press the MENU button, using the or scroll to DATE FORMAT - press ENTER/
DIAL and the current date format will display. Press the or button to make a
selection (DD/MM or MM/DD). Press the ENTER/DIAL button to confirm and the
MENU button to exit.
Note:
1. In the DD-MM mode, the time sequence is day-month;
2. In the MM-DD mode, the time sequence is month-day.
CALL WAITING SETTING
Press the MENU button, using the or scroll to CALL WAITING - press ENTER
and the current status will display. Press the or button to make a selection
(ON/OFF). Press the ENTER/DIAL button to confirm and the MENU button to exit.
14
Caller ID Call Waiting
When you subscribe to Caller ID/Call Waiting service from your local telephone
company, the telephone will display the name and number of the second caller while
you are having a conversation.
1. When you are on the line, the telephone will display the name and number of the
second caller.
2. Press the FLASH button to answer the second caller.
3. When you have finished, press the FLASH button to continue with your
conversation with the first caller.
SFMMB$
SFMMB$
SFMMB$
fgalYejg^fak±golj]ddY:
\]qYdhka\ka
\]qYdhka\g^fa;@j]ddY:
15
A caller ID record consists of the following information:
Reviewing Display Messages
MESSAGE WAITING - If you have voice mail service from your telephone company and
a message is left, the MESSAGE WAITING light will turn on and the message icon will
appear in the upper left corner of the LCD. The MESSAGE WAITING light and message
icon will remain illuminated until you have retrieved your voice mail and the MESSAGE
WAITING will be saved as a call.
NOTE: This function should be supported by your telephone company.
TOTAL & NEW CALLS - This shows you the total and new calls
to be reviewed. In this example, you have a total of 4 calls which
include 2 new calls and it is MONDAY.
PRIVATE - If the caller has exercised the option to prevent his name
and number from being sent, “PRIVATE” will show on the screen.
REPEAT CALLS - If a call comes repeatedly, the display will show
thephonenumberofthecallerplustherepeaticon(+)inthe
upper right corner of the LCD.
END OF LIST - This LCD displays “END OF LIST” when reaching
the top (end) of the call history list. If there is no call, then LCD
shows “NO CALL”.
OUT OF AREA - This message will display when someone calls
from an area where the telephone company is not offering the
caller identification services or is not yet providing number delivery
to your area.
BATTERY LOW INDICATOR - If there is low battery, the battery
low icon will turn on and flash.
Caller ID Call Records
16
Caller ID System Operations
Subscription to Caller ID service and/or voice mail service from your local phone
company is required to experience these features.
• NewVoiceMessageIndicator - The red indicator light above the LCD will flash
to indicate that you have a new voice message waiting. The lamp will continue to
flash until all the new calls have been reviewed.
• ReviewYourCallRecords - Use the or button to scroll through the caller list.
If the call is more than 13 digits, the arrow will show on the bottom right of LCD,
press the or button once to review the other digits, press the or button
again to review next call. At the end of the call record list, you will see the “END OF
LIST” message. Press the or button to continue.
• SaveCallRecords - Your phone automatically stores up to 99 call records. Once
the memory is full, the phone will automatically delete the oldest call record from
the list. You can free up memory space by manually deleting calls from this record.
• DeleteSingleorAllRecordNumber(s) - In the on-hook state, use the or
button to select the number which you want to remove, press the DELETE button,
the LCD will show “DELETE?” and then press the DELETE button again to remove
this number, press any button to exit. If you press the DELETE button for about 6
seconds, the LCD will show “ALL DELETE?” and press the DELETE button to remove
all numbers and the LCD will show “NO CALL”.
• UsingTheCallBackFeature
(NOTE: If the number is blocked or is not available, it can not be call backed.)
Call back an outgoing number: The unit stores your most recent 15 dialed numbers.
1. In the on-hook state, press the ENTER/DIAL button once, the last dialed
number will show on the LCD, then use the or button to select the
number that you want to dial out.
2. Pick up the handset, the phone number will be dialed out automatically.
Call back an incoming number: The unit stores a minimum of 99 incoming numbers.
1. In the on-hook state, use the or button to select the call you want to
call return.
2. Pick up the handset, the phone number will be dialed out automatically.
17
If you have problems with your phone, please check below for helpful hints:
BLANK OR FAINT LCD
• CheckandadjusttheLCDContrast.Checkthelinecord.Connectthetelephone
cord. Check batteries, Check adapter power adapter connection to phone and wall.
PHONE WILL NOT RING
• Checkringerswitchonthebackofthephone.Ifringerison,youmayhavetoo
many communication devices hooked to a single line. A communication device can
be a phone, modem or facsimile (FAX) machine. Contact your telephone company
for help in calculating the limit for your residence or business line.
NO DIAL TONE
• Verifythatthelinecordispluggedincorrectly.
• Verifythatthelinecordconnectioniscorrectandtightlysecured.
CALLER ID WILL NOT WORK PROPERLY/NO CALL DATA RECEIVED
Caller ID data can take up to two rings to appear on the screen. If data does not
appear, or does not appear correctly check the following:
• CallyourtelephonecompanytoverifythatyourcallerIDservicesareactive.
• IfyouhaveanansweringmachineconnectedtothisPhone,ensurethatyour
answering machine is set to answer after at least two rings.
• Donotanswerthecallbeforetworings.
• Contactyourtelephonecompanyiftheproblemcontinuesformorethan24hours.
The telephone company may be experiencing temporary line problems.
NO RESPONSE ON LCD DISPLAY
• IfyouhaveexperiencedapowerfailureortheACadapterhasnotbeenconnected
to the phone for a period of time, the batteries for memory back up could become
weak or dead. If the display screen does not respond after the power is restored
and/or the AC adapter is reconnected, replace the batteries with new ones.
Troubleshooting
Warranty
This product has a one-year over the counter warranty. For any inquiries after the
warrantyperiod,pleasecontactGraceDigitalInc.at(800)400-5156.Hoursarefrom
8:00 a.m. to 5:00 p.m. PST, Monday through Friday or visit www.sbctelephones.com.
In case of difficulties, visit our service center at
www.sbctelephones.com or call 800-400-5156
© 2006 Grace Digital Inc.
All rights Reserved
SBC is a trademark of AT&T Knowledge Ventures, L.P,
Licensed to Grace Digital Inc.
Printed in China
Table of contents
Other SBC Cordless Telephone manuals
