SCAN Andersen 4-5 User manual

Scan
Andersen 4-5
This manual is accompanied by a
pamphlet with General Iinstructions for
Installation.
Edition 15.11.07 - GB
INSTRUCTIONS FOR
INSTALLATION AND USE
MONTERINGSVEJLEDNING
med brugs- og fyringsanvisning
Indhold:
Generelle råd og anvisninger . . . . . . . . . .2-3
Reklamationsret
Type- og miljøgodkendelse
Udpakning
Tilbehør til din pejs
Montering af kakler og fedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærende underlag
Brændbar eller ikke brændbar væg
Gulvplade
Varmefordeling
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning. . . . . . . . . . . . . . . . .4-7
Tilslutning til eksisterende/muret skorsten
Tilslutning topafgang til stålskorsten
Forbrændingsluft udefra
Brugs- og fyringsanvisning . . . . . . . . . . . 8-10
Vedligeholdelse af pejseovnen
Håndtering af brændsel
Optænding og fyring
Fejlsøgning . . . . . . . . . . . . . . . . . . . . . . . . 11
SCAN 3
BRUGSANVISNING
TildenneBrugsanvisning hører ogsåen
generelMonteringsvejledning. Udgave03.03- DK
MONTERINGSVEJLEDNING
medbrugs-ogfyringsanvisning
Indhold:
Generellerådoganvisninger..........2-3
Reklamationsret
Type-ogmiljøgodkendelse
Udpakning
Tilbehørtildinpejs
Monteringafkaklerogfedtsten
Kvalitetskontrol
Anmeldelsespligt
Skorstenstjek
Skorstensløsninger
Bærendeunderlag
Brændbarellerikkebrændbarvæg
Gulvplade
Varmefordeling
Selvlukkendelåge
Justerskrue
Typeskilt
Produktionsnr.
Servicepakke
Monteringsvejledning.................4-7
Tilslutningtileksisterende/muretskorsten
Tilslutningtopafgangtilstålskorsten
Forbrændingsluftudefra
Brugs-ogfyringsanvisning...........8-10
Vedligeholdelseafpejseovnen
Håndteringafbrændsel
Optændingogfyring
Fejlsøgning.
.......................11
Tildennemonteringsvejledninghørerogsåen
separatbrugsanvisningfordenenkeltepejs.
Udgave02/03-DK
Til denne monteringsvejledninghørerogsåen
separat brugsanvisningforden enkelte pejs.
Udgave 02/03 - DK
Approved according to
EN 13240

You have chosen a product from one of Europe's leading manufacturers of wood-burning stoves. We are convin-
ced that your stove will be to your full satisfaction and give you many hours of pleasure if you follow the advice
and instructions of this manual.
Please read this manual as well as the General Instructions for Installation before beginning the installation.
Congratulations on your new SCANAndersen-
stove!
Ceramic smoke deflectors
Clean combustion
The SCAN Andersen 4-5 uses the "CB
technique" (Clean-Burn) to ensure an optimally
clean combustion. The extra combustion air is
preheated and led into the combustion cham-
ber close to the ceramic smoke deflector.
Ceramic smoke deflectors
Follow the sketches below for the dismounting
of the ceramic smoke deflectors. Remove the
log guard (a). Lift the lower smoke deflector
plate, pull out the pins of the lateral firebricks,
and remove the plate. The upper smoke
deflector plate can be removed in the same
way.
a
Mounting of the heat shie-
lds
You have to mount separate heat-shields under
the SCAN Andersen 4-5. Place the stove care-
fully on the back and mount the heat- shields
as shown on the sketch.
Scan Andersen 4-5
Wood / briquettes Fuel consumption kg/h
SCAN Andersen 4-2 1,3 kg
Combustion air % 55
Primary air % 75
Adjustment of the air
Handle
Your stove is equipped with a loose handle, which is
practical if you have small children. Put the handle
into the hole and turn it to open the door. If you want
a firm handle, you can mount the long screw that
you will find in the service bag.

1 Ashtray. When you open the door, you have access to the
ashtray, which is placed below the combustion chamber.
Attention! Be careful when you empty ashes from the stove.
There may be embers left for up to 24 hours after the stove
was last used.
2 Handle for shaking grate. The stove is equipped with a shaking
grate. When you activate the grate handle, the ashes from the
combustion chamber are emptied into the ashtray.
3 Regulation for primary air. Turn the air valve in order to open.
The primary air is used when lighting and refuelling the stove. It
should always be closed during continuous firing.
4 Regulation for combustion air. Push the button sideways. Left
position is closed and right position is open. The air is used for the
combustion and regulates the output of the stove.
The ashtray, shaking grate, and primary air should always be
closed during continuous firing.
3
2
1
4
Scan Andersen 4-5
You should read this manual as well as the General Instructions for Installation before beginning the installation.
Mounting of the side covering:
Base:
Convection plates:
Soap stones:

Krog Iversen & Co. A/S - DK-5492 Vissenbjerg
Technical info
Efficiency: 77%
Rated output: 4 kW
Min./max.: 2 - 6 kW
Weight of convection stove: 93 kg
Weight of stove with curved steel mantle: 78 kg
Weight of stove with soap stones: 178 kg
Connection piece diameter: int. 120/ext. 128 mm
Warranty conditions
All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control before
they leave the factory. However, if an error should occur, we back all SCAN wood-burning stoves and inserts with an
extensive, five-year limited warranty.
See also the General Instructions for Installation delivered with your stove for more details.
* To the middle of the rear
outlet (soapstone stove 630
mm)
* To the middle of
the rear outlet
Distances to flammable
materials (mm)
Scan Andersen 4-5
Data for calculation of the chimney
Stove with convection sides
Stove with curved mantle
A
B
C
D
D
C
Radiation area
Radiation area
Base
plate
Base plate
The following minimum distances should be
observed:
500
500
Stove
model
SCAN
Connecting
adaptor 1
Density of
flue gas
flow
g/s
2
Flue gas
tempera-
ture
oC
3
Minimum
draft
Pa
4
Density of
flue gas
flow
g/s
5
Flue gas
temperature
oC
6
Minimum
draft
Pa
A4-2 130 - - - 4,7 269 15
With closed doorsWith open doors
Column 5 shows the flue gas temperature in the connecting adaptor
Column 6 shows the lowest/minimum draft in Pa by rated value
Column 7 shows the lowest/minimum draft in Pa by 0.8 x rated value
*
*
758
466 448
651
158
960
450 448
629
158
B
For stoves without convection channels, the
minimum distances increase as follows:
Distance to furniture: 850 mm
Distance to the rear: 300 mm
Distance to the side, 90 degrees : 400 mm
4-5