SCAN 66 series User guide

SCAN A/S - DK-5492 VISSENBJERG
Scan 66 series
Congratulations on your new Scan wood-burning stove
You have purchased a product by one of Europe’s leading manufacturer’s of wood-burning stoves, and we are sure that you will have years of plea-
sure with your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
Please read this Assembly- and instructions manual before you start to assemble your stove.
Product registration number
Please indicate the product registration number at any enquiry
ASSEMBLY- AND INSTRUCTIONS MANUAL GB

2
Table of contents
Technical data ......................................................................................................... 3
Installation
Safety
Technical data and dimensions
Dimension sketch
Type plate
Product registration number
Assembly .................................................................................................................10
Additional accessories
Loose parts
Remove packaging
Mounting of the base/wall fitting
Mounting of the burn chamber
Positioning your wood-burning stove
Distance to furniture
Distance to flammable materials, shown with insulated flue pipe
Distance to flammable materials, shown with un-insulated flue pipe
Distance to firewall
Height adjustment of stove
Load bearing foundation
Floor plate
Existing chimney and pre-fabricated element chimney
Connection between stove and steel chimney
Requirements for chimney
Connection with 90° elbow pipe
Connecting piece / top outlet
Connecting piece / rear outlet
Fresh air intake
Closed combustion system
Instruction for use .............................................................................................. 29
CB technique
Primary air
Secondary air
Baffle plates
Ash drawer
Log guard
Instructions for heating ................................................................................... 30
Lighting
Handling fuel
Maintenance .........................................................................................................32
Troubleshooting .................................................................................................. 35
CONTENTS

3
Scan 66-5S-Curve
Installation
The house owner is responsible for ensuring that all necessary national and local safety measures are observed during installation and fitting
and also responsible for observing the fitting and operating instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the local authorities. You are also responsible for calling in a chimney sweep to
inspect and authorize the installation.
To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Our Scan Dealer will be able to
recommend a qualified fitter in your area. For information on Scan Dealers, please go to http://scan.dk.
Safety
Any changes made to the product by the dealer, installer or user could result in the product and safety functions not functioning as intended.
The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary
for the operation and safety of the stove are dismantled or removed.
The Scan 66-series consists of:
Scan 66-1 Wall: Stove with wall fitting
Scan 66-2 Pedestal: Stove with pedestal
Scan 66-4 Plinth: Stove with plinth base
Scan 66-5 S-Curve: Stove with S-Curve
TECHNICAL DATA
Scan 66-1 Wall Scan 66-2Pedestal Scan 66-4Plinth

4
Scan 66 Technical data Unit
CO Emission at 13% O20,029 %
CO Emission at 13% O2367 mg/Nm3
Dust @ 13% O227 mg/Nm3
Nox@ 13% O285 mg/Nm3
Efficiency 78 %
Nominel output 5 kW
Chimney temperature EN 13240 302 °C
Amount of smoke 5,0 g/sek
Sub-pressure EN 13240 12 Pa
Recommended sub-pressure in connecting piece 16 - 18 Pa
Required combustion air supply 10,2 m3/h
Fuel Wood
Fuel consumption 1,72 kg/h
Amount of fuel 1,3 kg
Technical data and dimensions
Materials: ...............Steel plate, cast iron, galvanised sheet, vermicolite
Surface treatment: ........................................................................... Senotherm
Max. wood length: ..................................................................................... 33 cm
Weight Scan 66 series:............................................................... ca. 90-100 kg
Connecting piece internal diameter: ............................................... 144 mm
Connecting piece external diameter: .............................................. 148 mm
Approval type: ................................................................ Intermittent fuelling
Intermittent fuelling means normal use of a woodstove. In other
words, you should let the fire die down until only the embers are left,
before refuelling.
The Scan 66 - series was build in compliance with the homologized
product type specified in the Assembly- and Instructions Manual
provided with the product.
The DoP declaration of performance is available from scan.dk
Test in compliance with EN 13240
TECHNICAL DATA
Please note:
You get the best use of the stove by using a
”top-down lighting”, see page 28.

5
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066001.idw
90066001
Målskitse Scan 66-1 væghængt
07-08-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
337
166**** 630
337
481
532
140
166****
171****
566**
117***
Front
Front
171****
366
483*
51
185
* Centre rear outlet
** Height to the beginning of the connecting
piece at top outlet
*** Fresh air intake at the back of the stove
**** Centre of fresh air intake bottom/
Connecting piece top outlet
Dimension sketch Scan 66-1 Wall
TECHNICAL DATA

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066002.idw
90066002
Målskitse Scan 66-2 Pedistal
06-08-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
382
452
171****
337
166**** 630
885**
946,5
799*
434***
185
140
481
532
366
483
Front
6
* Centre rear outlet
** Height to the beginning of the connecting
piece at top outlet
*** Fresh air intake at the back of the stove
**** Centre of fresh air intake bottom/
Connecting piece top outlet
Dimension sketch Scan 66-2 Pedestal
TECHNICAL DATA

7
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066004.idw
90066004
Målskitse Scan 66-4 Plint
19-08-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
171****
337
166****
946,5
434***
799*
185
140
630
380
500
885**
483
366
481
532
Front
Dimension sketch Scan 66-4 Plinth
TECHNICAL DATA
* Centre rear outlet
** Height to the beginning of the connecting
piece at top outlet
*** Fresh air intake at the back of the stove
**** Centre of fresh air intake bottom/
Connecting piece top outlet

8
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co
A/S
DK-5492
Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066126.idw
90066126
Målskitse S curve
02-03-2016 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
943
630
337
313
301
171
166
881
796
430
1037
428
168,5
Dimension sketch Scan 66-5 S-Curve
TECHNICAL DATA

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066008.idw
90066008
Scan 66 med typeskilt
05-08-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
6600000
Scan 66-1
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90066601
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Klasse 2
Certificate/Standard
EN 13240
ELAB-2081-NS
Approved by
Teknologisk Institut
Teknologisk Institut
³mN/gm72:2O%31tatsuD
C°203:erutarepmetsageulF
Wk5:tuptuotaehlanimoN
%87:ycneiciffE
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 300 mm - Front: 850 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
6102-100001
0,029% 367 mg/Nm³
Germany Stufe 2 1. BlmSchV
Scan 66-2 - 66-3 - 66-4 - 66-5
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90066600
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Klasse 2
Certificate/Standard
EN 13240
ELAB-2081-NS
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 27 mg/Nm³
Flue gas temperature: 302°C
Nominal heat output: 5 kW
Efficiency: 78%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 300 mm - Back: 150 mm - Front: 850 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 06-2016
0,029% 367 mg/Nm³
Schweiz
Germany Stufe 2
VKF Nr. 25728
1. BlmSchV
9
Type plates
All Scan wood-burning stoves are fitted with a type plate, that speci-
fies the approval standards and the distance to flammable materials.
The type plate is located at the back of the stove.
Product registration number
All wood-burning stoves are provided with a product registration
number.
The product registration number is located at the back of the stove.
Please make a note of this number on the front page as you will
always have to state it when contacting your dealer or Scan A/S.
Type plate
Product
registration
number
TECHNICAL DATA

10
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066026.idw
90066026
emballage
16-06-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066026.idw
90066026
emballage
16-06-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
10 ASSEMBLY
Accessories
• Glove
• Seal
• Repair lacquer for colored stoves
Additional accessories
• Small shaped floor plate in glass or steel
• Large shaped floor plate in glass or steel
Disposal of packaging
Your Scan stove may come supplied with the following packaging:
Wood packaging:
The wood packaging can be reused and after final use can be incine-
rated as a CO2 neutral product or sent for recycling.
Flamingotop:
Send for recycling or waste disposal.
Foam:
Send for recycling or waste disposal.
Plastic bags:
Send for recycling or waste disposal.
Stretch film/plastic film:
Send for recycling or waste disposal.

NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066068.idw
90066068
Montage af væghængt
13-08-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
Scan 66-1
Wall
Scan 66-1
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90066601
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Klasse 2
Certificate/Standard
EN 13240
ELAB-2081-NS
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 27 mg/Nm³
Flue gas temperature: 302°C
Nominal heat output: 5 kW
Efficiency: 78%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 300 mm - Front: 850 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 08-2014
0,029% 367 mg/Nm³
Schweiz
Germany
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 66\10066936.iam
10066936
Samling af vægbeslag til Scan 66
10-12-2015 jm
Scan 66
VÆGT:
AREAL:
N/A
N/A
A
B
C
A
B
C
11
Mounting of the base/wall fitting
Mount the base/the wall fitting before removing the stove from the
packaging.
The bag contains:
2 x
6 x
4 x
1 x
Please note!
The stove must remain in the packaging during
the mounting of the wall fitting at top outlet.
If the stove is to be connected with a rear outlet,
the stove must be lifted out of the packaging and
laid on e.g. a carpet, the front facing downwards.
See page 25.
ASSEMBLY

12
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066040.idw
90066040
afmont. af bagplade
01-09-2014 HMS
VÆGT:
AREAL:
N/A
N/A
2.
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066043.idw
90066043
exp. vægbeslag
28-08-2014 HMS
Scan 66
VÆGT:
AREAL:
7,26 kg
503742 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 66\90066009.iam
90066009
19-05-2014 HMS
VÆGT:
AREAL:
N/A
N/A
335
310
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\90066073.idw
90066073
vægbeslag justerskruer
01-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
108
108
310
322
1.
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066041.idw
90066041
mont. vægbeslag
01-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066041.idw
90066041
mont. vægbeslag
01-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
10 mm
3.
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066050.idw
90066050
vægbeslag
01-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
4.
ASSEMBLY
Mount the wall fitting on the wall.
It is important that it is level.
Mount bushing, screw and nut.
Dismount the rear plate by removing the four screws. Place the
rear plate on an even surface.
Remove the slits – use a drilling machine and nippers. Mount the rear plate loosely; it is not to be fixed, until after the
wall fitting has been mounted.

NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066044.idw
90066044
vægbeslag
28-08-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
5.
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066045.idw
90066045
vægbeslag
07-07-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
6.
C
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066046.idw
90066046
vægbeslag
01-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
7.
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066074.idw
90066074
Vægbeslag
29-08-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
8.
13
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066123.idw
90066123
mont. af vægbeslag
16-12-2015 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
Mount the four screws loosely in the rear plate again, now
with the wall fitting in between. Screw the rails and the
bottom plate together in the sides. Tighten the four bottom
screws.Tighten up all screws.
Mount the bottom plate on the existing four screws. Let the rails glide down through the hole along the bottom
plate.
Mount the two adjustment screws.
ASSEMBLY

14
A ( 0,40 : 1 )
B ( 0,40 : 1 )
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 66\10066900 - Manual.iam
90066125
vægbeslag
16-12-2014 sr
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066123.idw
90066123
mont. af vægbeslag
16-12-2015 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
9.
Scan 66-1
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90066601
Wood
Intermittent
EUR
Norway
Classification
Intermittent
Klasse 2
Certificate/Standard
EN 13240
ELAB-2081-NS
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 27 mg/Nm³
Flue gas temperature: 302°C
Nominal heat output: 5 kW
Efficiency: 78%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 300 mm - Front: 850 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 08-2014
0,029% 367 mg/Nm³
Schweiz
Germany
12.
A
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066075.idw
90066075
Justering af vægbeslag
01-09-2014 sr
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
11.
A ( 0,40 : 1 )
B ( 0,40 : 1 )
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 66\10066900 - Manual.iam
90066125
vægbeslag
16-12-2014 sr
Scan 66
VÆGT:
AREAL:
N/A
N/A
A
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066075.idw
90066075
Justering af vægbeslag
01-09-2014 sr
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
10.
CLICK!!
ASSEMBLY
Now hook the stove onto the wall fitting on the wall. Adjust the stove to that the doors has the correct slope.
Replace the type plate on the stove with the one delivered with
the wall fitting.
Monter skruer for at fastlåse ovnen til vægbeslaget.
Adjust from the bottom.

Scan 66 - 2
Pedestal
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066080.idw
90066080
Mellemplade pedestal udklip
12-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066080.idw
90066080
Mellemplade pedestal udklip
12-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066078.idw
90066078
Montage af piedestal u friskl.
10-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066078.idw
90066078
Montage af piedestal u friskl.
10-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066079.idw
90066079
Montage af piedestal friskl. bag
10-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066011.idw
90066011
Montage af piedestal friskl. bund
10-09-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066011.idw
90066011
Montage af piedestal friskl. bund
10-09-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
B ( 1 : 3 )
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066079.idw
90066079
Montage af piedestal friskl. bag
10-09-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
15
No external combustion air.
Mount the pedestal directly on the stove, without the divi-
sion plate.
External combustion air from the bottom.
(see page 26)
Use the delivered division plate. First cut out the hole, mount the
division plate, then the pedestal. Fasten the screws.
External combustion air from the rear.
(see page 26)
Mount the delivered cover plate, then the pedestal.
The cover plate from the rear is not to be reused.
Fasten the screws.
ASSEMBLY

16
D ( 0,3 : 1 )
D
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066066.idw
90066066
Montage af prismesokkel
12-09-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
Scan 66 - 4
Plinth
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066066.idw
90066066
Montage af prismesokkel
13-08-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIMENSION:
ASSEMBLY
Prepared for external air at
the bottom.
Cut out the hole with a
pair of cutting nippers.
Fasten the four screws after mounting the base.

17
NAVN:
STI:
M3 NR.:
MATERIALE: DATO: SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066127.idw
90066127
mont. S curve
05-04-2016 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
DIM.: Scan A/S
Scan 66 -5
S-Curve
ASSEMBLY
Place the delivered magnets on the markings on the front of the
base and mount the loose front. Please note that the base can be
mounted at the right or at the left of the stove.
Fasten the screws lightly so that it is possible to lift the stove with
base up.
Make sure that the S-base is horizontal – if necessary, use a spirit
level. Adjust the stove on the base, and then tighten the four screws.
Mount the S-shaped base on the stove before removing the packing.
Loosen the four screws (ca. 4-5 mm) so that it is possible to hook the
base on the stove.

18
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066027.idw
90066027
Røgkammer
26-08-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066029.idw
90066029
Skamol enkeltdele
08-08-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIM.:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066094.iam
90066094
Emballage inkl. skamol
11-07-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
M3 NR.:
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 66\60066003.ipt
8 mm
Nextrema glass
60066003
Kævlefang, glas
08-05-2014 SR
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066026.idw
90066026
emballage
16-06-2014 HMS
Scan 66
VÆGT:
AREAL:
N/A
N/A
=
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066084.idw
90066084
Åbne låge
26-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066084.idw
90066084
Åbne låge
26-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066085.idw
90066085
Luk låge
26-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066085.idw
90066085
Luk låge
26-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 66\90066085.idw
90066085
Luk låge
26-09-2014 hms
Scan 66
VÆGT:
AREAL:
N/A
N/A
÷
Click
ASSEMBLY
1 Scan 66-stove body
6 Skamol plates
2 pins for baffle plates
1 connecting piece for external
combustion air
1 log guard made of glass
Opening of the door.
Push the handle to the rear in
order to open the door.
Close the door without moving the
handle.

12 11
19
1
5
9
2
6
10
3
7
4
8
11 12
Mount the rear plate Slide the plate behind the grate Rear plate mounted
Left side plate Fit the side plate in at the top Slide the plate in place
Left side plate mounted Mount the right side plate in the
same way as the left plate
Right side plate mounted
Upper front plate Pass the plate towards the rear Lift the plate over the side plates
ASSEMBLY

20 ASSEMBLY
14
13 15
16 18
17
19 20 21
22 23 24
Mount the pins in the side plates
All burn chamber plates have now
been mounted Mount the glass log guard The stove can now be taken into use
Push the plate a bit backwards so
that it rests on the rail in the back Lower baffle
Let the plate rest on the rail with
the air slots Push the plate backwards in order to mount the pins
Let the plate glide back on the
upper edge Upper baffle Mount the upper baffle (the carvings must turn backwards)
Push the plate upwards so that it
rests on the front plate