Scandex SX-1114 User manual

SX-1114 BLUETOOTH
LASER SCANNER
USER GUIDE V2

INDEX
Characteristics...............................................................
Sleep Mode....................................................................
Settings.........................................................................
Prefix & Suffix.................................................................
Corresponding Character Table........................................
Performance Parameters.................................................
Bluetooth Pairing Methods...............................................
Key Terminator Function..................................................
Maintenance Record.......................................................
Character Codes Table....................................................
Warranty........................................................................
Content..........................................................................
1
5
2
9
11
12
13
31
34
35
36
10

1
Please take time to read this user guide before using the barcode scanner.
If you have any questions please contact us or alternatively support is available
via the “Scandex Red Card”enclosed in the box.
CHARACTERISTICS
Ergonomic design. External soft rubber bumpers and rugged internal build
for better and faster barcode reads. Easy to use with a simple setup. Large capacity,
superior to the average drop resistance. The latest barcode engine and decoding technology
greater than ordinary scanners ensures longer use after fully charged.

To turn on the scanner press and hold the trigger until you hear two beeps.
Bluetooth HID Matching Mode
2
SETTINGS
iOS SYSTEM SOFT KEYBOARD REVEAL/CONCEAL
Open Bluetooth on your device and search for a device named ‘Symcode’.
Insert the Bluetooth adapter into the computer’s USB port, if you are using a Bluetooth adapter.
Scan the codes below: ‘Bluetooth HID’ first and then ‘Matching Mode’.
Wait for 5 seconds and then press the trigger to start scanning.
When the indicator flashes the scanner is ready to connect to a Bluetooth device.
IOS System Soft Keyboard Reveal/Conceal

3
FUNCTIONS
Supported devices: Android, iPhone, tablet PC & laptops. Bluetooth 2.1, 3.0 & 4.0
Transmission distance under ‘Normal Mode’ 20 - 50 metres.
is 20m-50m and over 400m with no obstacles.
If the distance is exceeded the scanner will beep twice.
Each scanner has a unique mechanical ID to avoid interferences with other devices in use.
The customizable ID allows the user to distinguish the data source easily.
The pairing method is very simple. Repeated pairing is possible.
The ‘Check Mode’ is simple and easy to use,
The scanner will automatically connect with the last paired device when re-started.
can store up to 10000 barcodes.
Automatic ‘Sleep Mode’. Sleeping current is less than 10UA,
this extends greatly the standby time of the battery.
Use the charger provided to ensure a safe charge.
The scanner will keep connection with the last connected device when charging.

ID Settings
4
SCANNER SETTINGS
0 1 2 3
4 5
PARAMETERS TABLE
6 7
98

5
Hide scanner IDDisplay scanner ID
Settings 20s
2min
30s 60s
5min 10min 20min
‘SCANNER ID’: DISPLAY / HIDE
‘SLEEP MODE’ SETTINGS
No sleeping

Normal Mode Check Mode Total Data
Data Upload Clear Data
6
WORKING MODES
DATA TRANSFER SPEED SETTINGS
25 bits/second 100 bits/second

7
Enter Into Settings Exit SettingsRestore Factory Settings
RESTORE FACTORY SETTINGS
Continuous Scanning Scanning Interval Time
Interval time
Scanning the Same Barcode
SCANNING MODE SETTINGS
Flicker Scanning Flicker Scanning Time

8
Close the Attached
Code of UPC & EAN
Add 2 Bits Attached
Code to UPC & EAN
Add 5 Bits Attached
Code to UPC & EAN
Add 2 and 5 Bits Attached
Code to UPC & EAN
‘UPC / EAN ATTACHED CODE’ SETTINGS
Enable Enter Disable Enter
Line Skip
‘ENTER’ & ‘LINE SKIP’ SETTINGS

9
Example: To add the prefix ‘XY’ scan the following codes:’Settings’ & ‘Add Prefix’.
Turn to page 10,from the ‘Character Code Table’ scan the codes ‘5', ’8', ’5', ’9' and ‘Save’.
Return to page 9 and scan the codes ‘Reveal Prefix’ and ‘Exit Settings’.
Note: The parameter codes ‘5', ‘8' correspond to character ‘X’. ‘5', ‘9' correspond to character ‘Y’.
See ‘Corresponding Character Table’ on page 11.
Settings Exit Settings
PREFIX & SUFFIX SETTINGS
ADD PREFIX
Add Prefix Conceal Prefix Reveal Prefix
ADD SUFFIX
Add Suffix Not Reveal SuffixReveal Suffix

10
CHARACTER CODE TABLE
1 2 34
6 7 8 9
BA C D
E F
Save
0
5

11
Close Open
ASCII CODE SETTINGS
CORRESPONDING CHARACTER TABLE
Parameter code Representing
character Parameter code
Parameter code Parameter code
Parameter code
Representing
character
Representing
character
Representing
character
Representing
character
2 d -
2 e
2 f
3 0
3 1
3 2
3 3
3 4
3 5
3 6
3 7
3 8
3 9
3 a
3 b
3 c
3 d
3 e
3 f
4 0
4 1
4 2
4 3
/
-
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
@
A
B
C
.
4 4
4 5
4 6
4 7
4 8
4 9
4 a
4 b
4 c
4 d
4 e
4 f
5 0
5 1
5 2
5 3
5 4
5 5
5 6
5 7
5 8
5 9
5 a
5 b
5 c
5 d
5 e
5 f
6 0
6 1
6 2
6 3
6 4
6 5
6 6
6 7
6 8
6 9
6 a
6 b
6 c
6 d
6 e
6 f
7 0
7 1
X
Y
Z
U
V
W
R
S
T
O
P
Q
L
M
N
I
J
K
F
G
H
D
E
o
p
q
l
m
n
ihjhjI
j
k
f
g
h
c
d
e
‘
b
]
^
_
[
\
a
7 2
7 3
7 4
7 5
7 6
7 7
7 8
7 9
7 a
7 b
7 c
7 d
7 e
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
2 a
(
)
*
%
&
`
#
$
}
~
!
z
{
|
w
y
t
u
v
r
s
x
“
2 b +
,
2 c

12
F1 F2 F3 F4
F5 F6 F7 F8
F9 F10 F11 F12
HOME
TAB
Settings Exit Settings
KEY TERMINATOR FUNCTION

The Bluetooth adapter has 2 pairing methods on PC:
I. Computer with Bluetooth driver
II. Computer without Bluetooth driver (Necessary drivers must be installed)
III. Simultaneous use of the ‘USB Mode’ and ‘Virtual Serial Interface Mode’
13
BLUETOOTH PAIRING METHODS
‘USB Mode’ & ‘Virtual Serial Interface Mode’

14
I. COMPUTER WITH BLUETOOTH DRIVER
Matching method under ‘USB Mode’
Turn on the scanner, scan the code ‘Bluetooth HID’, the scanner enters into USB transfer mode.
Scan the code ‘Matching Mode’, the scanner enters into matching status.
Bluetooth HID Matching Mode
Insert the Bluetooth adapter into the computer’s USB port, in the bottom right corner of the screen
Double click the Bluetooth icon. Click ‘Add device’.
Double click the device named ‘Symcode’.
Click ‘Close’ when the device has been successfully added to the computer.
will appear the Bluetooth icon: .

will appear the Bluetooth icon: Double click the Bluetooth icon, ‘Add device’ and ‘Next Step’.
15
Matching method under ‘Virtual Serial Interface Mode’.
Bluetooth SSP Matching Mode
Scan the codes below: ‘Bluetooth SSP’ first and then ‘Matching Mode’.
Insert the Bluetooth adapter into the computer’s USB port, in the bottom right corner of the screen
A new device named ‘Symcode New Device’ will appear and a device called ‘Symcode Already Connected’.
.
Select the option ‘Choose My Own Passkey’ and enter the password ‘1234'.
Click ‘Symcode New Device’ and ‘Next Step’.
Click ‘Next Step’ and ‘Complete’ to finish the ‘Virtual Serial Interface Mode’ matching.
NOTE: If you need to use the scanner in both modes at the same time, connect the ‘Virtual Serial
Interface Mode’ first and then the ‘USB Mode’. The interface will show 2 connected icons ‘Symcode’.
The new devices ‘Symcode’ indicate the scanner matched successfully
under the ‘USB Mode’ and ‘Virtual Serial Interface Mode’.
If the scanner is not connected to other devices it can switch modes with no need of matching again.

16
II. COMPUTER WITHOUT BLUETOOTH DRIVER
Matching method under ‘USB Mode’
Insert the Bluetooth adapter into the USB port and the Bluetooth driver CD in the reader.
Double click the ‘setup.exe’ icon.
Choose ‘English’ and ‘Install’.
When the installation is complete, click ‘Yes’ to restart the computer.

Once the computer have restarted,
double click the bluetooth icon on the bottom right corner of the screen.
17

Scan the codes ‘Bluetooth HID’ and ‘Match Settings’ in sequence,
then double click the yellow sphere icon to search.
18
The bluetooth interface will appear.
Bluetooth HID Matching Mode