SC&T SDI01A-12G User manual

P([phone] F([phone] E[email protected] 10F, No. 493, Chung-Cheng Rd., Hsin Tien Dist., New Taipei City 231, Taiwan
Firmware Update Manual
Item No. SDI01A-12G
Firmware Type: WORKING
Notice
Update
Process
Step 1 Required equipment list as below:
PC *1 USB to Micro USB Cable *1
DC 12V / 1.5A adaptor *1 SDI01A-12G * 1
Step 2 Install CP210x_VCP USB to UART driver depends on your systems version.
Install 12G-SDI Installer for firmware update tool.
Step 3 Connect SDI01A-12G as below diagram

P([phone] F([phone] E[email protected] 10F, No. 493, Chung-Cheng Rd., Hsin Tien Dist., New Taipei City 231, Taiwan
Notice
Update
Process
Step 4 Turn off power of SDI01A-12G and connect to PC by USB to Micro USB
Cable
Step 5 Press and hold 『FW/UPDATE』button and power on, till『READY』LED
lit(around 2 seconds after) then release button
Step 6 Run『12G-SDI Converter Control.exe』program

P([phone] F([phone] E[email protected] 10F, No. 493, Chung-Cheng Rd., Hsin Tien Dist., New Taipei City 231, Taiwan
Notice ※ Number of USB port will different depends on PC
Update
Process
Step 7 Update program will detect USB port number then click 『Browse』 to
select firmware file 『SDI01-12G_Firmware_WORKING_53172102.bin』
then click『Open』

P([phone] F([phone] E[email protected] 10F, No. 493, Chung-Cheng Rd., Hsin Tien Dist., New Taipei City 231, Taiwan
Notice ※ Do not remove USB cable/power, or close update program to avoid
product damaged.
Update
Process
Step 8 File name and path and firmware version will be update, click 『Update』
to start.
Step 9 It will show『Update success』after finished, click OK to close the update
tool