Scansonic IN210 User manual

1
UK User Manual
DK Brugervejledning
DE Bedienungsanleitung
FR Guide d'instructions
ES Manual de instrucciones
IT Manuale di istruzioni
NL Gebruikershandleiding

2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINENT.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, re, etc.:
1. Do not place near any heat source such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
2. Do not block any ventilation openings of this product.
3. The device shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the device.
4. Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at any point where they exit from the device.
5. Please read Rating Labels on the back of unit for power input and other safety information.
6. Never unplug your unit by pulling on the power cord. Always grasp the plug rmly and pull
straight out from the outlet.
7. Repair or replace all electric service cords that have become frayed or otherwise damaged
immediately. Do not use a cord that shows cracks or abrasion damage along its length, the
plug, or the connector end.
8. To prevent re or shock hazard, do not use this plug with an extension cord or other outlet
unless the blades can be fully inserted to prevent blade exposure.
9. To prevent re or shock hazard, do not expose this device to rain or moisture.
10. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause
serious injury to the unit.
11. Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you
may be exposed to dangerous voltage or other hazards. Any service work should be carried
out by qualied technicians.
12. During lightning or raining days, unplug the unit for additional protection during thunderstorms
or when the unit is not used for prolonged periods. This will prevent damage to the unit from
lightning and power surges.
13. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit
switched on while unattended for long periods of time, e.g. overnight, while on holiday or while
out of the house. Switch it off and disconnect the mains plug from the mains socket.

3
Contents
Important Safety Instructions���������������������������������������������������������������������������������������������������������2
Contents�������������������������������������������������������������������������������������������������������������������������������������������3
Getting Started���������������������������������������������������������������������������������������������������������������������������������5
Unit Front View...........................................................................................................................7
Unit Back View ...........................................................................................................................8
Setup Wizard������������������������������������������������������������������������������������������������������������������������������������9
Internet Radio Mode���������������������������������������������������������������������������������������������������������������������� 11
Local Country Stations ............................................................................................................. 11
Selecting a station through Stations.........................................................................................12
Selecting a station through Podcasts.......................................................................................12
Getting Access Code and FAQ Solutions.................................................................................13
Adding Station to 'My Favourites' ............................................................................................13
Adding Station to 'My Added Stations' .....................................................................................13
Viewing Station Information......................................................................................................13
Storing Preset Stations ............................................................................................................14
Recalling a Preset Station........................................................................................................14
Music Player Mode ������������������������������������������������������������������������������������������������������������������������15
Setting up a Music Server ........................................................................................................15
Sharing Media with Windows Media Player .............................................................................15
Playing Shared Media ..............................................................................................................15
My Playlist ................................................................................................................................16
Repeat Play Mode....................................................................................................................16
Shufe Play Mode ....................................................................................................................16
Clearing My Playlist..................................................................................................................16
Prune Servers ..........................................................................................................................17
Now Playing Information ..........................................................................................................17
FM Mode�����������������������������������������������������������������������������������������������������������������������������������������18
Selecting FM Mode ..................................................................................................................18
Scan Setting.............................................................................................................................18
Audio Setting............................................................................................................................18
Viewing Station Information......................................................................................................19
Storing Preset Stations ............................................................................................................19
Recalling a Preset Station........................................................................................................19
Aux in Mode �����������������������������������������������������������������������������������������������������������������������������������20
Wireless Device Remote Control App �����������������������������������������������������������������������������������������21
App installation.........................................................................................................................21
Scansonic Remote App installation..........................................................................................21
Setting up the connection.........................................................................................................22
Starting the Navigation.............................................................................................................22
General Operation �������������������������������������������������������������������������������������������������������������������������23
Contents

4
Setting Sleep............................................................................................................................23
Setting Alarm............................................................................................................................23
Equaliser ..................................................................................................................................24
Network Setup..........................................................................................................................24
Setting Time/Date.....................................................................................................................25
Setting Language.....................................................................................................................25
Factory Reset...........................................................................................................................25
Software Update ......................................................................................................................25
Setup Wizard............................................................................................................................26
Viewing System Info.................................................................................................................26
Setting Backlight ......................................................................................................................26
Specications ��������������������������������������������������������������������������������������������������������������������������������27
Made in China
Imported by Dantax Radio A/S
Bransagervej 15 · 9490 Pandrup · Denmark
www.scansonic.dk

5
Getting Started
Carefully remove your radio from the box. You may want to keep the packaging for future use.
What you can nd inside of your package
■Main unit
■Instruction manual
■Power adapter
Positioning your Radio
Place your radio on a at/stable surface that is not subjected to vibrations.
Avoid the following locations:
■Where the radio will be exposed to direct sunlight.
■Where the radio will be close to heat radiating sources.
■Where the humidity is high and ventilation is poor.
■Where it is dusty.
■Where it is damp or there is a possibility of water dripping or splashing onto unit.
Before you use your radio, you need to know following:
Wireless LAN Setting
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you need to know the WEP or WPA code so
you can get the Internet Radio to communicate with the network.
• If your wireless network is congured for trusted stations you will need to enter the Radio's
MAC address into your wireless access point. To nd the Radio's MAC address use menu
items as follows: Main menu > System settings > Network > View settings > MAC
address.
Before you continue, make sure that your wireless access point is powered up and connected to
your broadband Internet. To get this part of the system working, read the instructions supplied with
the wireless access point is highly recommended.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in FM radio mode. It may be
necessary to adjust the position of the radio and/or antenna to achieve the best signal.

6
Using Headphones
You will require headphones tted with a 3.5 mm diameter stereo plug. The Headphones socket is
located on the front of this unit. Headphones are not supplied with this radio.
Turn down the volume before connecting earphones. Slowly raise the volume with the earphones
on until you reach your desired level.
Caution: long-term exposure to loud music may cause hearing damage. It is better to avoid
extreme volume when using earphones, especially for extended periods of time.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the back of the unit.
Then insert the power adapter into the mains socket. Press STANDBY/ON button to turn the unit
on or standby. To switch the unit off completely, unplug the power adapter from the mains socket.
Volume Control
Adjust the radio volume by turning the SELECT/SNOOZE knob. Make sure no menu setting is
going on.

7
Unit Front View
1. STANDBY/ON button
Press to switch radio on or standby.
2. button
Press to skip to previous track in Spotify
and Music player modes.
Press and hold to rewind current playing
track in Music player mode.
3. PRESET button
Press and hold to store preset station.
Press to recall stored preset station.
4. MODE button
Press to switch among Internet, Spotify,
Music player, FM and Aux modes.
5. button
Press to play/pause current playing track in
Spotify and Music player modes.
6. VOL/TUNE button
Press to shift between volume adjusting
function and tuning function of
SELECT/SNOOZE knob.
7. INFO button
Press to browse station information.
8. button
Press to skip to next track in Spotify and
Music player modes.
Press and hold to fast forward current
playing track in Music player mode.
9. BACK button
Press to return to previous menu option.
10. MENU button
Press to display menu screen.
11. SELECT/SNOOZE knob
Turn to browse options.
Press to conrm selection.
Press to activate snooze function while
alarm sounds.
12. Display
13. Speaker

8
Unit Back View
1. FM antenna
2. Headphones socket
3. AUX IN socket
4. DC IN socket

9
Setup Wizard
1. For initial use, the display will show 'Setup wizard' screen.
2. Press SELECT/SNOOZE knob to conrm 'YES' to start setup. Options in the setup wizard
include the following:
Date/Time
Set 12 or 24 hour format
Auto update
• Update date/time from FM
• Update date/time from Network
Select your time zone and daylight savings is needed.
• No update
Set the date and time is needed
Keep network connected
Select YES or NO
3. The Wizard will scan your location for accessible wireless networks. When the scan has
nished, a list of networks will be displayed.
WPS security is available for this network.
Names of wireless networks in range.
Selecting wireless network
a. If a WEP/WPA key (password) is required, display will ask you to input the WEP/WPA
code and show the password entry screen as follows:

10
b. Turn SELECT/SNOOZE knob to cycle through the alphanumeric character list, press
SELECT/SNOOZE knob to select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
c. If a wrong character is being input while entering your password, select to delete
that character.
Note: = Backspace; means return to previous track; radio will
automatically save the WEP/WPA you've input, so no bother to re-enter these codes.
d. After selecting the nal character of your password, turn SELECT/SNOOZE knob to
, and then press SELECT/SNOOZE knob to conrm. The radio is connected to
wireless network.
Note: If a password (WEP/WPA) isn't required by your network, radio will connect to
the network automatically.
4. Setup wizard completed, press SELECT/SNOOZE knob again to exit.

11
Internet Radio Mode
1. The display will show 'Main menu' after 'Setup wizard' completed. Press SELECT/SNOOZE
knob to select Internet radio mode.
2. While 'Station list' is highlighted, press SELECT/SNOOZE knob to conrm.
3. Then refer to following section to choose stations. Or if failed to connect to network, please
follow:
a. Check your Router, see it working normally or not;
b. Relocating your radio to a stronger signal position is necessary!
c. Make sure your password is input correctly.
Local Country Stations
Local "Country" will change according to your current location. It displays local programs of your
current location.
1. To enter local stations, press MENU button > Station list > Local "Country", press
SELECT/SNOOZE knob to conrm.
2. Turn SELECT/SNOOZE knob to select options, and then press SELECT/SNOOZE knob to
conrm.
3. Step by step to the program you desired.

12
Selecting a station through Stations
1. Press MENU button > Station list > Stations, press SELECT/SNOOZE knob to conrm.
2. In 'Stations' menu:
■'Location' enables you to choose from the radio stations provided by any country which you
choose from a list.
a. While 'Location' is highlighted to show, press SELECT/SNOOZE knob to conrm.
b. Turn SELECT/SNOOZE knob to select the region you wanted, and then press
SELECT/SNOOZE knob to conrm.
c. Using the same method to choose country, station in turn, radio will perform loading.
■'Genre' enables you to choose radio stations according to their content, for example, Classic
Rock, Sport, News, etc.
■'Search stations' enables you to enter all or part of station name to nd a station.
■'Popular stations' enables your radio to list the stations that have the most listeners.
■'New stations' enables your radio to list the stations that have recently joined the Internet
radio network.
Note: Some radio stations do not broadcast 24 hours a day, and some stations are not
always on-line.
Selecting a station through Podcasts
1. Press MENU button > Station list > Podcasts, press SELECT/SNOOZE knob to conrm.
2. Turn SELECT/SNOOZE knob to select options, and then press SELECT/SNOOZE knob to
conrm.
3. Step by step to your selecting program.

13
Getting Access Code and FAQ Solutions
1. To access to this order, press MENU button > Station list > Help, press SELECT/SNOOZE
knob to conrm.
Note: at this step, you can also listen the radio FAQ solutions.
2. When 'Get access code' is highlighted, press SELECT/SNOOZE knob to conrm, you will get
it.
Adding Station to 'My Favourites'
1. To register your radio with the portal: www.wiradio-frontier.com.
2. Create account login, enter Access code is required. Access code can be found from
"Station list > Help > Get access code".
3. You can add your favourite stations via the portal (www.wiradio-frontier.com).
4. After you added the stations, in order to have your radio access your new settings, get your
radio power off for several minutes is necessary.
5. The added stations are accessible by selecting MENU > Station list > My favourites.
Note: doing a 'factory reset' cannot erase 'my favourites' stations.
Adding Station to 'My Added Stations'
1. Even though the Internet radio portal contains thousands of stations, you may want to listen to
stations not listed. You can add your own stations via the portal (www.wiradio-frontier.com).
2. After you added the stations, in order to have your radio access your new settings, get your
radio power off for several minutes is necessary.
3. The added stations are accessible by selecting MENU > Station list > My added stations.
Note: doing a 'factory reset' cannot erase 'my added stations'.
Viewing Station Information
Internet programs broadcast additional information. Press INFO button repeatedly, the display
will show the information through Station Description, Genre, Country, Reliability, Bit rate, Codec,
Sampling Rate, Playback Buffer and Date.

14
Storing Preset Stations
Your radio can store up to 10 of your favourite Internet stations.
1. While an Internet station is playing, press and hold PRESET button until display shows 'Save
to Preset', and then turn SELECT/SNOOZE knob to select a preset number.
2. Press SELECT/SNOOZE knob to conrm, the display will show 'Preset stored'.
3. The station is stored and the display will then show 'P#'.
Recalling a Preset Station
1. Press PRESET button to show the stored preset stations.
2. Turn SELECT/SNOOZE knob to select the preset station you want to play and then press the
SELECT/SNOOZE knob to conrm.

15
Music Player Mode
Setting up a Music Server
• In order for your radio play music les from a computer, the computer must be set up to share
les or media.
• UPnP media sharing allows devices like this radio to play music from a shared media library,
navigating through tag menus such as Artist, Album or Genre.
• If you are running a suitable server system such as a PC with Windows Media Player10 or
later (WMP), and your music library is well-tagged, then it is recommended to use media
sharing.
• Only the UPnP server needs to be set up.
Sharing Media with Windows Media Player
The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP
platforms and servers may be used. To set up WMP for media sharing, perform the following steps:
1. Ensure that the PC is connected to the network.
2. Ensure that the radio is powered on and connected to the same network.
3. In WMP, add to media library about the audio les and folders you want to share with your
radio (Library > Add to Library…).
4. In WMP, enable media sharing (Library > Media sharing…).
5. Make sure your radio has accessed to the shared media by selecting it and clicking Allow.
You can also set a name for the shared media in Settings… Click OK to close the dialogue
boxes.
6. The PC is now ready to stream music to the radio. The WMP UPnP service runs in the
background, there is no need to start WMP explicitly.
Playing Shared Media
1. Press MODE button repeatedly to select Music player mode.
2. While 'Shared media' is highlighted, press SELECT/SNOOZE knob to conrm, and then step
by step to your selecting music.

16
3. When a track is playing, you can:
a. Press button to skip to previous track; press and hold button to rewind current playing
track.
b. Press button to play/pause current playing track.
c. Press button to skip to next track; press and hold button to fast forward current playing
track.
My Playlist
The My Playlist feature enables you to create a playlist of your favourite tracks from your music
libraries.
Once you have your playlist ready you can choose to play through the playlist on your radio and
can also set shufe and repeat play functions while your playlist is playing.
To save a track to 'My Playlist', browse the track you want to add to the playlist, press and hold
SELECT/SNOOZE knob, then the track is added to the playlist.
To play 'My Playlist', press MENU button, and then turn SELECT/SNOOZE knob to select
'My playlist', press SELECT/SNOOZE knob to conrm. Browse the track you want to play, press
SELECT/SNOOZE knob to select.
Repeat Play Mode
Press MENU button, and then turn SELECT/SNOOZE knob to select 'Repeat play: Off', then
press SELECT/SNOOZE knob repeatedly to shift repeat play 'On' or 'Off'.
Shufe Play Mode
Press MENU button, and then turn SELECT/SNOOZE knob to select 'Shufe play: Off', then
press SELECT/SNOOZE knob repeatedly to shift repeat play 'On' or 'Off'.
Clearing My Playlist
This feature enables you to clear the contents of your playlist.
1. Press MENU button, turn SELECT/SNOOZE knob to select 'Clear My playlist' and then press
SELECT/SNOOZE knob to conrm.
2. Select 'YES' to clear my playlist.

17
Prune Servers
The Prune Servers feature enables you to remove music servers that are no longer available to
you to browse for music.
1. Press MENU button, turn SELECT/SNOOZE knob to select 'Prune servers' and then press
SELECT/SNOOZE knob to conrm.
2. Select 'YES' to 'Prune shared media wake on LAN servers'.
Now Playing Information
While a track is playing, the display shows the track and a progressing bar with gures for elapsed
and total track time.
To view further information, press INFO button repeatedly to display more information about the
track.

18
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, press VOL/TUNE
button to activate the tuning function and then turn SELECT/SNOOZE knob to change the
frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press VOL/TUNE button to activate
the tuning function and then turn SELECT/SNOOZE knob clockwise or anticlockwise, and
then press the SELECT/SNOOZE knob, your radio will skip forwards or backwards until it
reached the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press MENU
button, turn SELECT/SNOOZE knob to select Scan setting, and then press
SELECT/SNOOZE knob to conrm.
2. The display will show 'Strong stations only?', turn SELECT/SNOOZE knob to select 'YES',
and then press SELECT/SNOOZE knob to conrm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SELECT/SNOOZE knob to select
Audio setting, and then press SELECT/SNOOZE knob to conrm.
2. The display will show 'Listen in Mono only?', turn SELECT/SNOOZE knob to select 'YES',
and then press SELECT/SNOOZE knob to conrm.

19
Viewing Station Information
FM stations broadcast additional information. Press INFO button repeatedly to view information
through Radio Text, Program Type, Program Name and Date.
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations.
1. While a FM station is playing, press and hold PRESET button until display shows
'Save to Preset', and then turn SELECT/SNOOZE knob to select a preset number.
2. Press SELECT/SNOOZE knob to conrm, the display will show 'Preset stored'.
3. The station is stored and the display will then show 'P#'.
Recalling a Preset Station
1. Press PRESET button to show the stored preset stations.
2. Turn SELECT/SNOOZE knob to select the preset station you want to play and then press the
SELECT/SNOOZE knob to conrm.

20
Aux in Mode
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to
your external audio device through the AUX IN socket on the rear of unit.
2. Connect power adapter to mains socket, press STANDBY/ON button to switch unit on.
3. Press MODE button repeatedly to select Auxiliary Input mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as well is
recommended.
Note: the unit will automatically switch to standby mode after 30 minutes if the source device
is disconnect, switch off or the source input is too close to mute.