ScatterBox POE606 User manual

Quick Start Guide - qPOE606 Copyright 2021 System Q Ltd
1
Powerful High Load Gigabit Switch - 71W per port
ScatterBox is a registered trademark of System Q Ltd
POE606 - Quick Start Guide
User Information
· The PoE Switch must be installed in a clean, dry
environment where it will not be exposed to high
temperatures, moisture or excessive dust.
· Do not touch the PoE Switch or any of its connections with
wet hands.
· Ensure the power is switched off if the PoE Switch is not in
use for a long period of time.
· There are no user serviceable parts in the PoE Switch and
opening or attempting to repair the product will void the
warranty.
· Only use the PSU originally supplied with the product.
· Do not install or use the device if the power cable is
damaged.
The POE606 is a power 1Gbps 4 way switch that can supply up to 71W of power per port.
Designed for higher load POE CCTV Equipment such as PTZs or you can use it to power other devices
such as PoE extenders.
Because of the very high 71W output per port the power supply is external to the switch supplied with
it.
Setup Options
Option 1
To power IP Cameras using the PoE switch
then connect the IP Cameras using
CAT5e/CAT6 Ethernet Cable, for longer
distances we recommend using high
quality cable, with solid copper cores.
Option 2
Provide network infrastructure to PoE and
non-PoE Devices, like computers, and other
Network devices.

Quick Start Guide - qPOE606 Copyright 2021 System Q Ltd
2This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
All specifications are approximate. System Q Ltd reserves the right to change product specificationsor features without notice. Whilst every effort is
made to ensure that these instructionsare complete and accurate, System Q Ltd cannot be held responsible for anylosses, no matter how they arise,
from errors or omissionsin these instructions,or the performance or non-performance ofthe equipment refered to.
Powerful High Load Gigabit Switch - 71W per port
ScatterBox is a registered trademark of System Q Ltd
LED Status Indicators
LED
Condition
Status
Power
On
The switch is receiving power
Off
The switch is not receiving power
Network / Link
On
The port is connected
Off
No connection to the port
Flashing
The port is transmitting or receiving data
PoE
On
The port is linked and providing power to a device
Off
The port is not providing power to a device
Troubleshooting
Problem
Possible Cause
Solution
No Power light on
Switch
No power to the device
Check power to device from external source. Check that
the power lead (IEC lead) is plugged in to the PSU and
the PSU is plugged into the switch.
Loose connection
Check that the power lead (IEC lead) is plugged in to the
PSU and the PSU is plugged into the switch.
Network light not
flashing
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly.
No PoE on
connected device
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly
Total power
consumption exceeded
Check the load devicesare not above the total power
consumption of the switch.
Cable length
Check the distance of Ethernet cable to your device.
Ethernet cables have a 100m maximum length.
Slow flashing LEDs,
No Network or PoE
on load devices
Faulty cable or device
Turn the power off to the switch & unplug the load
devices (Check Ethernet cabling to load devices). Leave
the switch turned off for 10 seconds and then power the
switch back up, plug each device back into switch
individually to help troubleshoot the suspect cable.
Specification
Downlinks
4 x RJ45
Uplinks
2 x RJ45
PoE
71W (Max per port)
Power
250W (Whole device maximum)
Bandwidth
10/100Mbps/Full Gigabit
Use
Internal Use Only
Working Temperature
0°C ~ 40°C
Power Input
240V AC (PSU and Lead supplied)
Dimensions
W118 x D95 x H28mm

Quick Start Guide - qPOE304 Copyright 2021 System Q Ltd
3
Full 1Gbps PoE Extender and 2 Way Switch
ScatterBox is a registered trademark of System Q Ltd
POE152 - Quick Start Guide
User Information
· The POE152 must be installed in a clean, dry environment
where it will not be exposed to high temperatures,
moisture or excessive dust.
· Do not touch the POE152 or any of its connections with
wet hands.
· There are no user serviceable parts in the POE152 and
opening or attempting to repair the product will void the
warranty.
· Do not install or use the device if the CAT5e/CAT6 Ethernet
Cables connected are damaged.
The POE152 is a high speed IP PoE extender and 2 way splitter.
Full 1Gbps in and out this is a really useful piece of kit for both extending PoE past the 100m mark and
also adding on a 2nd IP device or connection.
Powered by the inbound IP for ease of installation.
How It Works
The POE152 is easy to install into an IP CCTV systemas shown below. It can be installed at the end of a
100 meters network cable to extend the network and PoE supply by 100 meters at full speed.

Quick Start Guide - qPOE304 Copyright 2021 System Q Ltd
4This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
All specifications are approximate. System Q Ltd reserves the right to change product specifications or featureswithout notice. Whilst every effort is
made to ensure that these instructionsare complete andaccurate, System Q Ltd cannot be held responsible for any losses,no matter how they arise,
from errors or omissionsin these instructions, or the performance or non-performance of the equipment refered to.
Full 1Gbps PoE Extender and 2 Way Switch
ScatterBox is a registered trademark of System Q Ltd
LED Status Indicators
LED
Condition
Status
POE IN - Network Link
On
The port is connected
Off
No connection to the port
Flashing
The port is transmitting or
receiving data
POE IN - POE
On
The port is linked and providing
power to a device
Off
The is not providing power to a
device
Troubleshooting
Problem
Possible Cause
Solution
No Power light on
Switch
No power to the device
Check power to device from external source. Check that
the power lead (IEC lead) is plugged in to the PSU and
the PSU is plugged into the switch.
Loose connection
Check that the power lead (IEC lead) is plugged in to the
PSU and the PSU is plugged into the switch.
Network light not
flashing
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly.
No PoE on
connected device
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly
Total power
consumption exceeded
Check the load devicesare not above the total power
consumption of the switch.
Cable length
Check the distance of Ethernet cable to your device.
Ethernet cables have a 100m maximum length.
Slow flashing LEDs,
No Network or PoE
on load devices
Faulty cable or device
Turn the power off to the switch & unplug the load
devices (Check Ethernet cabling to load devices). Leave
the switch turned off for 10 seconds and then power the
switch back up, plug each device back into switch
individually to help troubleshoot the suspect cable.
Specification
Max Cable Run
Max 100m
Input Power
25W
Output Power
25W
Bandwidth
10/100Mbps/Full Gigabit
Use
Internal Use Only
Dimensions
W50 x D103 x H29mm

Quick Start Guide - qPOE304 Copyright 2021 System Q Ltd
5
Full 1Gbps PoE Extender and 2 Way Switch
ScatterBox is a registered trademark of System Q Ltd