Sceptre UMS Series User manual

-1-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Dear Sceptre Customer,
Congratulations on your new ultra high definition SCEPTRE UMS Series UHD
Display purchase. This display supports 4K resolution. Thank you for your
support. To ensure safety and many years of trouble free operation of your
display, please read the manual carefully before making any adjustments, and
keep them in a safe place for future references. This manual contains
instructions for the U405CV-UMS, U515CV-UMS, U550CV-UMS, and
U650CV-UMSmodels. We hope you enjoy your new SCEPTRE UHD Display.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at [email protected].
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at [email protected].
Web Chat is available during business hours M-F 8:30AM-5:30PM.
We recommend you register your SCEPTRE Display at our online website
http://www.sceptre.com/registration.html.
This 4K UHD Display is MHL® ready using HDMI 1 / MHL.
This UHD Display supports 4K resolution at 60 Hz refresh rate under
HDMI 1, 2, and 3.

- 2-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
IMPORTANT INFORMATION

- 3-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your Liquid Crystal Television, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

-4-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the display.
Unplug the power cord before
cleaning the display. Please use the
included custom bezel cleaning cloth
for cleaning the bezel of the display
only. Do not use a liquid or a spray
cleaner for cleaning the product. Do
not use abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
When moving the display from an area
of low temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the
display immediately after this to avoid
causing fire, electric shock or
component damage.
Do not place the display on an
unstable cart, stand, or table. If the
display falls, it can injure a person and
cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the display.
Any heat source should maintain a
distance of at least 5 feet away from
the display, i.e. radiator, heater, oven,
amplifier etc. Do not install the product
too close to anything that produces
smoke or moisture. Operating the
product close to smoke or moisture
may cause fire or electric shock.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
operation of the display and to protect
it from overheating, be sure these
openings are not blocked or covered.
Do not place the display in a
bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the
ventilation slots of the display. Do not
place any objects on the top of the
Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the display.
Do not use the display in a portrait
format (by rotating 90 degrees) under
high temperature environment (25°C
or higher), since this would retard heat
dissipation and would eventually
damage the display.
The display should be operated only
from the type of power source
indicated on the label. If you are not
sure of the type of power supplied to
your home, consult your dealer or
local power company.
The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
The display is equipped with a three-
pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit
only into a grounded power outlet as a
safety feature. If your outlet does not
accommodate the three-wire plug,
have an electrician install the correct
outlet, or use an adapter to ground the
appliance safely. Do not defeat the
safety purpose of the grounded plug.
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.

- 5-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
The wall socket should be installed
near the equipment and should be
easily accessible.
Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the display from damage due to power
surges.
Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
immediately. Do not try to repair the
product yourself.
Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
Do not install the product in an area
with heavy dust or high humidity.
Operating the product in environments
with heavy dust or high humidity may
cause fire or electric shock.
Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
If any of the following occurs please
contact the dealer:
oThe power connector fails
or frays.
oLiquid sprays or any object
drops into the display.
oThe Display is exposed to
rain or other moisture.
oThe Display is dropped or
damaged in any way.
oThe performance of the
Display changes
substantially.
Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.

-6-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the display, make sure that
the antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the display during a lightning storm or when it is left unattended
or unused for long periods of time, unplug the display from the wall outlet and
disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.

-7-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Opening the Package
The SCEPTRE display is packaged in a carton. Any standard accessories are packed
separately in another carton. Due to the size and weight of the product, it is suggested
that it must be handled by a minimum of 2 or more persons. Since the glass can be
easily scratched or broken, please handle the product gently. Never place the unit on a
surface with the glass facing downwards unless it is on protective padding. When
opening the carton, check that the product is in good condition and that all standard
accessories and items are included. Save the original box and all packing materials for
future shipping needs.
Package Contents
U405CV-UMS
SCEPTRE Display x 1
Display Stand x 2 (L & R)
Screws x 4 (M4 x 15mm)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
U515CV-UMS
SCEPTRE Display x 1
Display Stand x 2 (L & R)
Screws x 4
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
U550CV-UMS
SCEPTRE Display x 1
Display Stand x 2 (L & R)
Screws x 2 (M5 x 10mm)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
U650CV-UMS
SCEPTRE Display x 1
Display Stand x 2 (L & R)
Screws x 2 (M5 x 12mm)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)

-8-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Installation
Please read the user manual carefully before performing the installation. Please use the
power cord designated for the product. When an extension cord is required, use one
with the correct power rating. The cord must be grounded and the grounding feature
must not be defeated. The product should be installed on a flat surface to avoid tipping.
Space should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the display onto the wall, please see page 8, and
10 for additional information. Avoid installing the product in the kitchen, bathroom or
other places with high humidity dust or smoke, so as not to shorten the service life of
the electronic components. Please ensure the product is installed with the screen in
landscape orientation. Any 90°clockwise or counterclockwise installation may induce
poor ventilation and successive component damage.
Recycling Information
Dispose unwanted electronics and batteries through an approved recycler.
For TVs please visit the web at http://www.earth911.com/recycling-guide/how-to-
recycle-large-electronics/
For Batteries please visit the web at http://www.call2recycle.org/
For more information, visit: www.sceptre.com/recycling.html or call (888)
580-5588.

-9-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Attaching or Removing the Stand For U405CV-UMS
1. To install the feet of the TV, lay the TV flat on a table. Afterwards obtain the two
display stands that are labeled L for left and R for right. They represent the left
side stand and the right side stand when you are facing the front of the TV. Place
the stands on to the each indentation slot and secure the stands with the included
screws on each side.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we recommend you to use a
display safety strap (not included) in order to minimize the possibility of
the display toppling over. Safety straps are available for purchase online
at websites such as amazon.com or walmart.com.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.

- 10 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Attaching or Removing the Stand For U515CV-UMS
1. To install the feet of the TV, lay the TV flat on a table. Afterwards obtain the two display
stands that are labeled L for left and R for right. They represent the left side stand and the
right side stand when you are facing the front of the TV. Place the stands on to the each
indentation slot and secure the stands with the included screws on each side.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we recommend you to use a display
safety strap (not included) in order to minimize the possibility of the display toppling
over. Safety straps are available for purchase online at websites such as
amazon.com or walmart.com.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.

-11 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Attaching or Removing the Stand For U550CV-UMS
1. To install the feet of the TV, lay the TV flat on a table. Afterwards obtain the two
display stands that are labeled L for left and R for right. They represent the left
side stand and the right side stand when you are facing the front of the TV. Place
the stands on to the each indentation slot and secure the stands with the included
screws on each side.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we recommend you to use a
display safety strap (not included) in order to minimize the possibility of
the display toppling over. Safety straps are available for purchase online
at websites such as amazon.com or walmart.com.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.

- 12 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Attaching or Removing the Stand For U650CV-UMS
1. To install the feet of the TV, lay the TV flat on a table. Afterwards obtain the two
display stands that are labeled L for left and R for right. They represent the left
side stand and the right side stand when you are facing the front of the TV. Place
the stands on to the each indentation slot and secure the stands with the included
screws on each side.
2. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we recommend you to use a
display safety strap (not included) in order to minimize the possibility of
the display toppling over. Safety straps are available for purchase online
at websites such as amazon.com or walmart.com.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.

-13 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Table of Contents
IMPORTANT INFORMATION.............................................................. 2
SAFETY INSTRUCTIONS................................................................... 3
SAFETY INSTRUCTIONS................................................................... 4
IMPORTANT INFORMATION.............................................................. 6
Television Antenna Connection Protection...................................... 6
Opening the Package........................................................................... 7
Package Contents................................................................................ 7
Installation............................................................................................ 8
Recycling Information........................................................................... 8
Attaching or Removing the Stand For U405CV-UMS.......................... 9
Attaching or Removing the Stand For U515CV-UMS........................ 10
Attaching or Removing the Stand For U550CV-UMS........................ 11
Attaching or Removing the Stand For U650CV-UMS........................ 12
Table of Contents............................................................................... 13
Identifying Front and Rear Panel ....................................................... 15
Front View...................................................................................... 15
Rear View Mounting Pattern For U405CV-UMS ........................... 15
Rear View Mounting Pattern For U515CV-UMS ........................... 16
Rear View Mounting Pattern For U515CV-UMS ........................... 16
Rear View Mounting Pattern For U650CV-UMS ........................... 17
Side Control Buttons...................................................................... 17
Rear View Connections ................................................................. 19
SCEPTRE Remote Control................................................................ 21
Installing Batteries to the Remote Control..................................... 23
Connection Suggestions.................................................................... 24
If You Have Digital Cable without Cable Box or Antenna… .......... 24
Connecting DVD Player with Component YPbPr…....................... 25
Connecting Wii™ with Composite….............................................. 26
Connecting Cable or Satellite boxes with HDMI… ........................ 27
Connecting to a PC with HDMI… .................................................. 28
Connecting a Digital Audio Receiver with Optical SPDIF… .......... 29
Switching Sources.............................................................................. 30
Ready to Watch Some TV?*.............................................................. 31
If You’ve Connected Antenna to the TV*… ................................... 31
OSD (On Screen Display) Controls ................................................... 32
Via Remote Control ....................................................................... 32
Via Display Side Panel Buttons..................................................... 32
OSD (On Screen Display) Options .................................................... 33
PICTURE....................................................................................... 33

- 14 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
SOUND.......................................................................................... 36
CHANNEL...................................................................................... 38
SETUP........................................................................................... 39
Detailed Explanations ........................................................................ 44
USB Connection Explained ........................................................... 44
Closed Captioning (digital and analog) Explained......................... 46
MHL Explained............................................................................... 47
Direct Function Buttons ................................................................. 48
HDMI ARC (Audio Return Channel) Explained ............................. 49
Ratings Explained.......................................................................... 50
Aspect Ratio Explained.................................................................. 52
Shortcuts to Browsing Channels.................................................... 53
How do I clean the display ?.......................................................... 54
Troubleshooting ................................................................................. 55
Call Us If You Need Help!.................................................................. 59
U405CV-UMS Specification............................................................... 60
U515CV-UMS Specification............................................................... 62
U550CV-UMS Specification............................................................... 64
U650CV-UMS Specification............................................................... 66
LIMITED PRODUCT WARRANTY .................................................... 68
Disclaimer, Trademarks, & Copyright Information............................. 70
FCC Compliance Statement .............................................................. 71

- 15 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT –The light is red when power is plugged in but the display is not turned on. The
light turns blue when the display is turned on. The display might take 10 –12 seconds to power
on. This is considered to be normal.
REMOTE SENSOR –The remote sensor receives all the commands from the remote control.
Rear View Mounting Pattern For U405CV-UMS
Mounting Specification: 200mm x 200mm using 4 screws sized at M5 (not included).
Top two mounting holes are 14mm deep and the bottom two mounting holes are 10mm
deep.

-16 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Rear View Mounting Pattern For U515CV-UMS
Mounting Specification: 400mm x 200mm using 4 screws sized at M6 (not
included). Length of screw should not exceed 14mm for the upper two and 10mm
for the bottom two. Please Note: The length of screw refers to how deep the screw
can go inside the mounting holes. When you’re buying screws, you should add the
original length to the thickness of your mounting plate in order to get the total screw
length.
Rear View Mounting Pattern For U515CV-UMS
Mounting Specification: 400mm x 200mm using 4 screws sized at M6 (not
included). Top two mounting holes are 14mm deep and the bottom two mounting
holes are 9mm deep.

-17 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Rear View Mounting Pattern For U650CV-UMS
Mounting Specification: 400mm x 400mm using 4 screws sized at M6 (not included).
Length of screw should not exceed 20mm. Please Note: The 20mm length of screw
refers to how deep the screw can go inside the mounting holes. When you’re buying
screws, you should add the original 20mm to the thickness of your mounting plate in
order to get the total screw length.
Side Control Buttons
1. VOL(+) –This button increases the display’s volume. If a sub-menu
is active, pressing this button will move the select right.
2. VOL(-) –This button decreases the display’s volume. If a sub-menu
is active, pressing this button will move the selection left.
3. CH(▲)–This button changes the display channel up. If the OSD is
active, this button functions as up for the menu.
4. CH(▼)–This button changes the display channel down. If the OSD
is active, this button functions as down for the menu.
5. –This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will exit the OSD.
6. –This button switches between all the different sources of the
display. When the OSD is active, this button acts as the enter
button and confirms the menu selection.
7. –Turn on the display by pressing the button once. Press the
button again to turn off the display.

- 19 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Rear View Connections
1. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The black (optical SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital optical input.
2. YPbPr / AV–This connection port is for DVD players or satellite / cable set-
top boxes that use component or composite cables. For YPbPr connect
green, blue, and red for video, and then connect white for left channel audio,
and red for right channel audio. For AV connect the yellow plug to the green
port, connect white for left channel audio, and red for right channel audio.
3. Line Out (3.5mm mini-jack) –This connection is for connecting to analog
audio receivers. You can either use the 3.5mm mini-jack for connection or
purchase a 3.5mm mini-jack to female RCA conversion cable from any
electronic store to connect to your analog audio receiver.
4. HDMI 4 (ver. 1.4) –HDMI 4 houses a HDMI version 1.4 connection. Under
ultra HD 4K x 2K resolution this connection supports 30 Hz refresh rate.
This HDMI also supports ARC (audio return channel) / CEC (consumer
electronics control) functions (no audio return channel). HDMI connects to
devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable
/ satellite set-top box. This connection port receives pure digital audio and
high definition signal through one single cable. This port also can accept a
HDCP video device for video such as PC.
5. HDMI 3 (ver. 2.0) –HDMI 3 houses a HDMI version 2.0 connection. Under
ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and
HDCP 2.2. This HDMI also supports CEC (consumer electronics control)
functions including audio return channel. HDMI connects to devices that use
HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top
box. This connection port receives pure digital audio and high definition
signal through one single cable. This port also can accept a HDCP video
device for video.
6. HDMI 2 (ver.2.0) –HDMI 2 houses a HDMI version 2.0 connection. Under
ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and

- 20 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
HDCP 2.2. This HDMI also supports CEC (consumer electronics control)
functions including audio return channel. HDMI connects to devices that use
HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top
box. This connection port receives pure digital audio and high definition
signal through one single cable. This port also can accept a HDCP video
device for video.
7. HDMI 1 (ver. 2.0 / MHL) –HDMI 1 houses a HDMI version 2.0 connection.
Under ultra HD 4K x 2K resolution this connection supports 60 Hz refresh
rate and HDCP 2.2. This HDMI also supports CEC (consumer electronics
control) functions including audio return channel. HDMI connects to devices
that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable /
satellite set-top box. This connection port receives pure digital audio and high
definition signal through one single cable. This port also can accept a HDCP
video device for video. HDMI 1 also doubles as the MHL connection for cell
phones. MHL is a protocol where the display will display what your cell phone
displays. If your cell phone supports MHL you can purchase a MHL cable
from any electronic store and connect it to HDMI 1 and also your cell phone.
Make sure the display’s source is changed to HDMI 1 and turn on your cell
phone. You should see an image of your cell phone screen.
8. TV –This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
9. USB –USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the display’s firmware.
Please Note:
This display features a power saving function which will turn off the
display automatically after 10 minutes of idling on a connection with no
signal. This feature is present on all connection.
TV tuner is an optional item for this display.

- 21 -
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
SCEPTRE Remote Control
This remote control follows SONY’s universal remote code. To find the actual code
you need to consult your cable or satellite tech support.