ScharkSpark FQ36 User manual

ScharkSpark FQ36 Guard Drone

Model：FQ36
Weight: 65g
Flight time: 12minutes
Operating temperature range: 32° to 140°F (0° TO 40°C)
Dimensions:7.5” x 7.5” x 2”
Capacity :650mAh
Voltage:3.7V
Battery type: LiPo
Energy: 3.7 Wh
Charging temperature range :41° to 104°F (5° TO 40°C)
Charging time: 90mins (depending on charging power)

Insert blade protector into the groove.
AB
A
B

90
12

④Turn on the transmitter, Push up and down the left control
stick, when the light was not shinning, it indicates the
connection has finished.
Important tips: during the calibration, please ensure the
aircraft is put on a flat place. Otherwise the following flight
would be hard to control
③Turn on the transmitter. The Transmitter will flash slowly and
beep twice

If the aircraft keeps drifting leftwards when
hovering, push the joystick to the right to
adjust until it gets balanced.
If the aircraft keeps drifting forwards when
hovering, push backward the joystick to
adjust until it gets balanced.
Guard

1.Place the drone in front of the pilot before pairing the drone to the transmitter. Make sure the head
of the drone faces forward and the tail faces towards the pilot.
2.After pairing and calibration, press the Headless Mode button to enter Headless Mode function.
Three beeps will be heard from the transmitter, and the drone's lights will start blink constantly.
3.Press the Headless Mode button again, (the drone will beep once) the drone will exit Headless
Mode.
4.Under Headless Mode, the forward direction is the direction the pilot faces when the pilot pairs the
drone with the transmitter.

87