Schlage BZ200 User manual

Encoder (BZ200)
Quick Start Guide
Compatible with Schlage Omnia
and Schlage eGO Smart Locks
WORKS WITH
The Schlage Encoder (BZ200) has a one year warranty.
Our goods come with guarantees that cannot be excluded
under the local consumer law. You are entitled to a
replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
We continuously optimise products
as new technologies and features are
developed. For this reason, we
reserve the right to make alterations
to the products without prior notice.
Disclaimer
www.allegion.com.au
www.allegion.co.nz
Warranty
PDSC0056

Schlage Encoder (BZ200) Steps:
Light/sound status
Model :
Dimensions :
Power interface :
Power input :
Radio frequency :
Support card type :
Light:
Sound:
Schlage Encoder (BZ200)
70mm x 70mm x 26mm
Type-C USB
5V/500mA
13.56Mhz
MiFare S50
One short beep indicates successful
operation
Green light indicates: Encoder mode
Blue light indicates: Reader mode
Connect the USB
cable with PC
Plug the USB into the
Encoder
Follow the instructions of the software to use
the Encoder
3
1 2