SCHWARZWOLF BENGO Manual
ROTATABLE TORCH & CAR CHARGER & POWER BANK USER’S MANUAL
The smart item is designed to be a powerful, utility torch and carcharger. The product‘s built-in battery can be charged by
car socket with product‘s input inner plug which is protected by cylindrical cover. If there is no enough space to place the
product, you can rotate product‘s LED lamp head to 180°. Ensure it can connect to the car socket. The top of that cover
with a strong magnet makes the product be able to attach to iron object. Especially when it is used as a highlight torch,
you can x on a proper place and convenient for lighting. Besides, when you press the energy test button is also the torch
switch, and you can know how much power left in the built-in battery. Then you can use it to
charge your digital devices anytime and anywhere.
PRODUCT DESCRIPTION:
1. LED lamp
2. USB output port & USB input port
3. Energy/recharging indicator(Green)
4. Charging indicator (Red)
5. Energy test button/Torch switch
6. Rotation axis
7. Car charger plug (DC Input)
8. Cylindrical cover
9. Magnet
PRODUCT CHARACTERISTICS
1. Size: Φ26*145mm
2. Capacity of built-in Li-battery: 1400mAh
3. DC output: 1A
4. DC input: 12V~24V/10A
5. Brightness of one LED lamp: 80~100LM
6. Power of LED lamp: 1W
7. Continuous lighting time: 3-4hours
8. Effect of charging: charge the mobile phone for 2-3hours,
charge iPhone to get 60-70% power
9. To charge the built-in battery by car: about 3-4hours
10. Main material: ABS & Aluminum
OPERATIONS:
CHARGE THE BUILT-IN BATTERY OF PRODUCT:
By Car: Step 1: Hold the product, and pull the top cylindrical cover (8), you can
see the DC input port (7). Then use this DC plug insert to the car charger socket
by your car. (Below picture)
step 2: When you insert this item into the car charger socket,
but there is no enough space to place the product surrounding the
car charger socket. Then you can rotate product‘s LED lamp head
to 180°. Ensure it can connect to the car
socket. (Below picture)
step 3: : If the product and car socket correctly connected, you
would see the charging indicator (4) light. When the built-in battery
of product is full, the indicator will stop ash, and all green energy
indicators will light.
CAR CHARGER TO CHARGE IPAD OR MOBILE PHONE:
Step 1:
The output port of the product up to 1A, and you can use it to
charge high current product such as iPad. Insert the car charger into cigar lighter.
Step 2:
Put the extended cable into the charger‘s DC output port
(USB Port (2)), and then put the small plug into the iPad with the
connector adapters to connect. You can also use the original
cable to connect product and your devices.
Step 3: If the charging function is working, you can see the
charging indicator from your device.
(Below picture)
MOBILE POWER TO CHARGE MOBILE PHONE:
Step 1:Based on your mobile phone select the correct connector,
and then connect the connector with the other end of the extended
cable. Put the extended cable into the charger‘s DC output port
(USB Port ), and then put the small plug into the cell phone with
the connector adaptor to connect. You can also use the original
cable to connect product and your devices.
Step 2: Before charging your mobile phone, please press the LED
switch for a second twice rapidly, then red LED indicator light, if
there is no output from the charger last 30 seconds, charger will
automatically shut down, and red LED indicator goes out.
Step 3: If the charging function is working, you can see the
charging indicator from your mobile phone. (Below picture)
Based on your mobile phone select the correct connector,
HIGHLIGHT TORCH WITH TWO LIGHTING MODES:
Step 1: Press the LED lamp switch about 3 seconds, then LED
lamp light, it can be used as a torch, if you want to turn it off, just
repeat this action.
Step 2: There are two modes of lighting status,
which are strong light, rapid ash. By pressing
the switch button (5) to choose your
favorite mode.
MAGNET:
For properly place your torch, you can attach the product with its
bottom magnet to x on a place you like for convenient location.
BATTERY CAPACITY CHECKER:
To check how much power left in built-in
battery, just gently press the energy test
button (5). The LED indicators will show
the power level of the built-in battery.
All green LED light means built-in battery
is full, if there are two LED light means
about 50% of the power. And one LED light
means about 25% of Power. (Right picture)
ANNOUNCEMENT:
Please do not scrape the surface of the product with sharp
object, and keep it clean, it can prolong the using time.
This charger is not waterproof, please do not use it in outdoor rainy days. If the product falls into the water accidentally, use a
clean cloth to absorb the water on the product’s surface. In case of short circuit, use the hair drier to make it dry.
Do not put the item on car’s dashboard, because when the dashboard temperature over 70C degree, it will damage the built-in
battery while the battery occur as bulging.
This product has overcharge protection, effectively extending
the battery life on your phone safe to use. Its Li-battery has
protection circuit, and the product itself is also in circuit with
protection circuit design, which is dual insurance. Intelligent
charging, fast charge constant current, constant voltage
charge, balanced charge, effectively extending the built-in
battery life. Powerful intelligent protection function with
overcharge, over discharge, overload, reverse polarity, short
circuit protection function etc.
When removing the product from the car adapter suitable for charging, hold the product for the whole body, not just movable head. In case of inappropriate
usage there is an risk of getting product damaged.
● If the product does not work, check one of the following
options.
1 Check whether the adapter is suitable for your mobile phone
/ electronic equipment.
2) Short-circuit protection of the built-in battery.
When the output current is too large (over 1.5 A) or output
circuit, four green LED indicators will all ash 19 times, about
after 10 seconds, then it automatic shutdown. Just open again
can reuse it
3) If the charger has not been used for some days, the power of
the built-in battery would be exhausted. Press the energy test
button. If there is only one green indicator light, which is hardly out of power, the charger can not charge your mobile phone.
---To solve this problem, you should use the charger insert to
a car charger plug, power, or computer to get charged for 2-3 hours, when the built-in battery is full, the charger will return to work.
● This is not a toy, please do not let children to play with it.
