Schwinn U130i User manual

ASSEMBLY MANUAL / OWNER’S MANUAL
130i
This product is compliant with the
applicable CE requirements.

2
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 4
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Leveling the Bike 14
Moving the Bike 14
Important Safety Instructions - Owner’s 15
Features 16
Console Features 17
Contact Heart Rate (CHR) 20
Operations 22
Adjustments 22
Initial Setup 22
Quick Start / Manual Program 23
User Profiles 23
Profile Programs 25
Pausing or Stopping 27
Results 27
GOAL TRACK Statistics 28
Console Setup Mode 30
Maintenance 31
Troubleshooting 33
TABLE OF CONTENTS
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty, contact your local distributor.
If you have questions or problems with your product, please contact your local Schwinn distributor.
To nd your local distributor, go to: www.nautilusinternational.com
Nautilus, Inc., www.NautilusInc.com - Customer Service: [email protected] | Nautilus, Inc., 18225 NE Riverside Parkway, Portland,
OR 97230 USA | Printed in China | © 2013 Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be
registered in other nations or otherwise protected by common law. MyFitness Pal®is a registered trademark of its owner.

3
IMPORTANT SAFETY INSTRUCTIONS
— ASSEMBLY
!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not connect power supply to the machine until instructed to do so.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine
and will void the warranty.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine
replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.
• Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future
reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close
range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical
provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number”
section to determine the location of the magnets on this product.

4
SAFETY WARNING LABELS AND SERIAL NUMBER
Serial number
Product
specification
• Lisez et assimilez tous les avertissements
apposés sur cet appareil.
• Gardez les enfants et les animaux de
compagnie éloignés de cette machine en
tout temps
• Déconseillé aux enfants âgés de
moins de 14 ans.
• Lisez et familiarisez-vous avec le Manuel
du propriétaire et avec tous les
avertissements avant d’utiliser cette
machine.
• Soyez prudent lorsque vous utilisez cet
équipement pour ne pas vous infliger de
graves blessures.
• Cette machine supporte un poids
maximal de 300lbs. (136kg).
• Remplacez toute étiquette
d’avertissement endommagée, illisible
ou manquante.
• La fréquence cardiaque qui s’affiche
sur la console est une approximation
et doit être utilisée seulement à titre
indicatif.
• Read, understand and obey all
warnings on this machine.
• Keep children away.
• Not intended for use by anyone
under 14 years of age.
• Prior to use, read and understand
the Owner’s Manual.
• Injury or death is possible if
Caution is not used while using this
machine.
• The maximum user weight for this
machine is 300 lbs (136 kg).
• Replace any “Caution”, “Warning”
or “Danger” label that is illegible,
damaged, or removed.
• The heart rate displayed is an
approximation and should be used
for reference only.
8002739_B

5
SPECIFICATIONS
105cm (41.3”) 54cm (21.4”)
141cm (55.6”)
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
level surface. Allow a workout area of a minimum 2.3m x 1.8m (90” x 70”).
Basic Assembly Tips
Follow these basic points when you assemble
your machine:
1. Read and understand the “Important Safety
Instructions” before assembly.
2. Collect all the pieces necessary for each
assembly step.
3. Using the recommended wrenches, turn
the bolts and nuts to the right (clockwise)
to tighten, and the left (counterclockwise) to
loosen, unless instructed otherwise.
4. When attaching 2 pieces, gently lift and look
through the bolt holes to help insert the bolt
through the holes.
5. The assembly can require 2 people.
This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class S
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
Maximum User Weight: 136 kg (300 lbs.)
Total Surface Area (footprint) of equipment: 5670 cm2
Machine Weight: 26.5 kg (58.4 lbs.)
Power Requirements:
Operational Voltage: 220V - 240V AC, 50Hz
Operating Current: 0.4A
Regulatory Approvals:
AC Power Adapter: CE compliant.
0.6m
24”
1.8m
70”
2.3m
90”
0.6m
24”
0.6m
24”
0.6m
24”