Schwinn 250 User manual

ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com
250

2
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 5
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Moving the Bike 21
Leveling the Bike 21
Important Safety Instructions 22
Features 23
Console Features 24
Remote Heart Rate Monitor 26
Operations 29
Adjustments 29
Initial Setup 30
Quick Start / Manual Program 31
Guest User / Profile Program 31
User Setup Mode 32
Profile Programs 36
Fitness Test 37
Heart Rate Control Workout 37
Distance Goal Workout 38
Results/Cool Down Mode 38
Pausing or Stopping 39
User Statistics 39
Console Setup Mode 41
Maintenance 43
Troubleshooting 46
Nautilus, Inc., (800) NAUTILUS / [phone], www.NautilusInc.com - Customer Service: North America
[phone], [email protected] | outside U.S. +01-360-859-5180, [email protected] |
Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered
trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN®
and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners
TABLE Of CONTENTS
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

3
IMpORTANT SAfETY INSTRUCTIONS
-ASSEMBLY
This icon means a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.
• Donotconnectpowersupplytothemachineuntilinstructedtodoso.
• Donotassemblethismachineoutdoorsorinawetormoistlocation.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafficandexposure
to bystanders.
• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhen
doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or
awkward movements on your own.
• Setupthismachineonasolid,level,horizontalsurface.
• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethe
safety of this machine and will void the warranty.
• Ifreplacementpartsarenecessary,useonlygenuineNautilus®replacementpartsand
hardware. Failure to use genuine replacement parts can cause a risk to users, keep the
machine from operating correctly and void the warranty.
• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformance
in accordance with the Manual.
• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforefirstuse.Keep
the Manual for future reference.
• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrect
function.

4
SAfETY WARNINg LABELS ANd
SERIAL NUMBER
•
•
•
•
•
•
300lbs. (136kg).
Keep children away.
Prior to use, read and understand the
Owners Manual.
Injury or death is possible if Caution is not
used while using this machine.
The maximum user weight for this
machine is 300 lbs (136 Kg).
Replace any “Caution” “Warning” or
“Danger” label that is illegible, damaged,
or removed.
This machine is for home use only.
•
•
•
•
•
•
FCC Compliance
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatetheequipment.
The power supply complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This power supply has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedetermined
byturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyone
or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

5
SpECIfICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the
locationmustbeonahard,levelsurface.Allowaworkoutareaofaminimum103”x65”(2.6mx
1.7m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
• Theassemblyrequires2people.
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or
equivalent),Rated120V60Hz
Input, 9VDC, 1500mA Output.
Class 2 or LPS.
46”
(117 cm)
25”
(63.5 cm)
63” (160 cm)

6
Item Qty Description Item Qty Description
1 1 Rear Stabilizer 10 1 Seat Bottom
2 1 Front Stabilizer 11 1 Seat Rail *
3 1 Seat Frame 12 1 Console Mast
4 1 Frame 13 1 AC Adapter
5 1 Console 14 1 Left Pedal
6 1 Console Bracket 15 1 Right Pedal
7 1 Handlebar Bracket 16 1 Upright Handlebar
8 1 Seat Rail Bracket * 17 1 Side Handlebar
9 1 Seat Back 18 1 MP3 Cord (not shown)
* Pre-installed on Frame (Item 4).
pARTS
1
2
3
4
5
6
78
9
11
12
13
14
15
16
17
10

7
Tools
Included Not Included
6 mm
Item Qty Description Item Qty Description
A 1 CarriageBolt,M8x85 H 1 HexBolt,M7x30
B 1 HexBolt,M8x85 I 4 Curved Washer, M8
C 1 ConsoleTiltAdjustmentKnob J 4 Cap
D 8 ButtonHeadHexScrew,M8x16 K 8ButtonHeadHexScrew,M8x45
E 1 Lock Nut, M8 L 1 Lock Washer, M6
F 4 HexScrew,M8x16 M 1 Flat Washer, M6
G 14 Flat Washer, M8
(recommended)
HARdWARE / TOOLS
A B C D E F G H I J
K L M

8
1. Remove Seat Rail from Frame and Disconnect Heart Rate Cable
NOTICE : Make sure that the heart rate cable does not fall into the frame tube. Hardware is
not on hardware card.
2. Remove Seat Rail Bracket from Seat Rail
NOTICE : Hardware is not on hardware card.
ASSEMBLY
4
11 D
G
X7
X2
D
G
8

9
1
2
F
X4
D
G
17
3
X4
3. Attach Stabilizers to Frame
4. Attach Side Handlebar to Seat Frame

10
5. Attach Seat Pads to Seat Frame Assembly
6. Loosen and Pull the Seat Post Adjustment Knob to Slide Seat Assembly onto Seat Rail
NOTICE : Do not crimp the Heart Rate Cable.
Note:LocktheAdjustmentKnobintooneoftheSeatRaillockingholes.
11
K
G
9
10
X8

11
7. Connect Heart Rate Cable to Seat Assembly
NOTICE : Do not crimp the Heart Rate Cable.
8. Attach Seat Rail Bracket to Seat Rail Assembly
NOTICE : Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
8
D
X2
G

12
9. Attach Seat Rail Assembly to Frame Assembly
NOTICE : Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
D
G
X7

13
10. Attach Console Mast to Frame Assembly
NOTICE : Align the clips on the cable connectors and make sure the connectors lock. Do
not crimp Console Cable.
I
D
X4
12

14
11. Attach Upright Handlebar to Console Mast
16
7
H
L
M
X1

15
12. Attach Console Bracket to Console Mast
NOTICE : Do not crimp the cables.
6
C
A
B
G
X1
E
G
X1

16
13. Remove Hardware from Console
NOTICE : Do not crimp the cables.
Note: Hardware is pre-installed *.
5
*
X4

17
14. Connect Cables and Attach Console to Frame Assembly
NOTICE : Align the clips on the cable connectors and make sure the connectors lock. Do not
crimp Console Cable. Do not fully tighten the hardware.
X4
*

18
15. Adjust and Tighten the Console Mast and Console
NOTICE : Tighten hardware and install Caps.
J
X4
#2

19
16. Attach Pedals to Frame Assembly
15
14

20
17. Connect AC Adapter to Frame Assembly
18. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in
accordance with the Owner’s Manual.
13