Sciener BLE4.1 User manual

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第1页 共 7页
Elevator Controller User Manual (BLE4.1)
Introduction
Model:SN-261 Master chip：Nordic 51802
1) Unlock with app via BLE technology
2) Send e-Key remotely
Set the validity period of the e-Key
Freeze or unfreeze the e-Key
3) Unlock with IC card
4) Record unlocking operation on App

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第2页 共 7页
Mainboard
Description
Remark
A
antenna board interface
A1
RF
A2
RF
A3
RF
B
cascade board interface
C
reset button
D
spare antenna interface
E
power connector
E1
Power+
E2
GND
P1
output port
P1_COMC
NC
P1_COMN
Public
P1_COMO
NO
.
.
.
.
.
.
.
.
.
P8
output port

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第3页 共 7页
Cascade board
Description
Remark
INPUT
Inout port
Connect mainboard Cascade
board interface or output port of
upper level expansion board
OUTPUT
Output port
Connect the input port of Next
level expansion board or keep
dangling
EXP1
Control output port
Same with mainboard P1
.
.
.
.
.
.
.
.
.
REXP8
Control output port

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第4页 共 7页
Front panel Back panel
Description
Remark
EXA
antenna interface
Connect A of
mainboard with 3pin
cable
Card area

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第5页 共 7页
一、 Parameter
Bluetooth standard
4.1BLE
Mobile phone
Android 4.3 / IOS7.0
Power supply
DC Power
Voltage range
9~16V
Stand-by current
10 mA
Working current
＜400 mA
Operating temperature
-20~70℃
Card type
MIFARE M1 S50
Unlocking
App & IC card
Button
Oringal status
New status

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第6页 共 7页
Operation points
1. Reset
Long press the reset button to factory state
2. Add admin
Touch the front panel to enable the mainboard
Add admin on app
3. Delete admin
Delete the equipment on app
Notice：Delete the admin on app,the elevator
controller will be back to factory state
4. Add IC card
Operate on TTHotel app
5. Delete IC card
Operate on TTHotel app
6. Modify card valid period
Operate on TTHotel app
7. Use of elevator
controller
Notice：stand nearby the controller to add
admin and operate.
IC card
1. Room card ( for one specific room)
2. Hotel Master card ( for all floors)
3. Building card ( for one specific building)
4. Floor card ( for one specific floor)
5. Customized card ( for some specific rooms)

www.sciener.com
Hangzhou Sciener Intelligent Control Technology Co., Ltd.
Web：www.sciener.cn
Tel：[phone]
第7页 共 7页
App - TTHotel
Scan to download the app