Scosche BOOMBOTTLE MM User manual

Register your product online at
www.scosche.com/register
~ SCDSI I IE" BTMS
BOOMBOTTLE™MM
WATERPROOF WIRELESS SPEAKER
WITH BUILT-IN MAGICMOUNT™
FEATURES
• Rugged IP67 dustproof/
waterproof construction
• Rechargeable battery for up
to
12 hours of music playback
• Dual pairing for true stereo sound
• Unique bottle design fits into
water bottle cages & cup holders
• 2 passive subwoofers provide
large-speaker bass
in a small package
• Automatic indoor/outdoor
EQ
• Built in bottle opener
• Magnetic top and base for phone
and speaker mounting options
Works with: Most smartphones and tablets
with
A2DP streaming audio.
IMPORTANT!
DO NOT RETURN PRODUCT TO THE RETAILER
IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS
CALL US TOLL FREE:
1-800-363-4490 X1
HOURS MON-FRI BAM-5:30PM (PST) SATURDAY BAM-2PM (PST)
8/uetooth is a registered trademark of Bluetooth SIG, Inc.
©2018 SCOSCHE INDUSTRIES, INC.
SI 300BTMS 3/18

OVERVIEW
PARTS INCLUDED
(1) BOOMBOTTLE™ MM
speaker
(1) Large metal plate
(1) XL circular metal plate
(1) Type C to USB charge cable
(1) Protective film sticker
(1) Carabiner clip
(1) Cleaning wipe
SPECIFICATIONS
Audio Input: Bluetooth & 3.5mm aux.
Battery: 4000mAh Ii-ion
Continuous Use Time: Up
to 12 hrs.
Operating Range: 30 ft. (9M)
Charging input:
SV, 2A
Bluetooth Version 4.2,
A2DP, AVRCP
Dimensions: 185mm(H) x 72mm(D)
Weight: 1.25 Lbs.
Waterproof Rating: IP67
1. BOOMBOTTLE™ MM SPEAKER
2. MAGICMOUN"fTM MAGNETIC MOBILE DEVICE MOUNT
3. CARABINER
4. BOTTLE OPENER
5. ACCESS PANEL COVER
6. ACCESS PANEL
7. VOLUME UP (+)
8. MFB (MULTI-FUNCTION BUTTON)
9 • VOLUME DOWN (-)
10. use TYPE C INPUT PORT
11. 3.5mm AUDIO INPUT
12. 4-LED BATTERY LEVEL INDICATOR
13. BLUETOOTH LED STATUS INDICATOR
14. MAGICMOUN"fTM MAGNETIC SPEAKER MOUNT
15. 1/4
11
THREADED MOUNTING HOLE
16. TYPE-C TO use CABLE
17. MAGICPLATE™ METAL PLATE
(for mounting mobile device to speaker)
18. PROTECTIVE FILM STICKER
19. MAGICPLATE™ XL CIRCULAR METAL PLATE
(for mounting speaker to non-magnetic surface)
2

1
OVERVIEW
6
'+----+- 7 --o
--a--o
+----+- 9 --o
®
19
10 --+--C===:l o
11 ----===:::::i-------
3
14
15
®~

BUTTON FUNCTIONS
Power On
Press and release multi-function
button
(M FB). (A)
Power Off
Press and hold the M FB for 3 seconds.
Play/Pause
Click MFB once.
Track Forward
Click MFB twice.
Track Back
Click MFB three times. A --
Answer/End Call
Click MFB once.
Volume Control
Press "+" or "-" button (B) to increase
or decrease volume. Unit will emit a
sound prompt when the maximum
volume is reached.
Auto Shut-off
BOOMBOTTLE™ MM will shut down
automatically with no wireless playback
or 3.5 connection after 10 minutes.
Re-Pairing
To search for new device, single-tap MFB, "+" & "-"
buttons at the same time. BOOMBOTTLE™ MM will lose
the existing connection and start pairing to a new device.
4
B

CHARGING
Charge the BOOMBOTTLE™ MM using the
included USB Type C
to USB cable with a
USB charger (not included) or other USB
power source. Refer
to the chart below:
Note: Low battery warning prompt will
sound once when the battery level reaches
10%, once more when the battery level
reaches 5%, and one final prompt will
sound right before the unit shuts off. I I
BATTERY LEVEL
Note: When speaker is off, check battery level @
by tapping the multi-function button once.
~D1 ~D2 ~D3 ~D4
0 0 0 0
75-100%
0 0 0 0
50-75%
0 0 0 0
25-50%
0 0 0 0 <25%
(*)
(*) will flash when charge is depleted
5

CONNECTING
/
----- -----
---- ----
PAIRING (individual speaker)
1. Power on/Pairing: Press and hold the multi-function
button
(MFB) for 3 seconds to turn on the BOOMBOTTLE™
MM. A tone prompt will sound. The Bluetooth indicator
{Blue
LED) will blink repeatedly.
2. Enter your device's Bluetooth menu to search for and
connect to the BOOMBOTTLE™ MM.
3. Select BOOMBOTTLE™ MM.
4. A sound prompt will notify you of a successful connection.
Note: After powering on the BOOMBOTTLE™ MM it will
automatically reconnect to the last device paired.
An audio
prompt will indicate a completed connection. If no device
is
found within 25 seconds, BOOMBOTTLE™ MM will enter pairing
mode (with
an audio prompt), and will be found on a new pairing
device under the pairing name "BOOMBOTTLE MM".
6

CONNECTING
DUAL PAIRING (two speaker units)
1. Power on both BOOMBOTTLE™ units at the same time.
2. Press and hold the"+" & "-" buttons on one speaker
for 3 seconds.
3. A tone prompt will sound, indicating the speakers have
connected.
4. Enter your device's Bluetooth menu to search for and
connect
to the BOOMBOTTLE™ MM.
5. A second tone prompt will sound.
Note: Turning off one speaker will shut off both.
DUAL PAIRING (while one speaker is currently
paired to phone)
1. Power on speaker currently paired to mobile device.
2. Sound prompt will indicate successful connection to
mobile device.
3. Press and hold the"+" & "-" buttons for 3 seconds
(speaker will automatically enter pairing mode).
4. Power on second speaker.
5. A sound prompt will indicate a successful connection of
both speakers.
6. BOOMBOTTLE™ MMs will reconnect to mobile device.
3.5MM AUDIO-IN
The BOOMBOTTLE™ MM may also be used with non-Bluetooth
devices (personal CD or MP3 players). Simply connect the
3.5mm headphone jack on your device to the 3.5mm input on the
speaker using a 3.5mm audio cable (not included).
7

MAGICPLATE™ INSTALLATION
OPTION 1
Remove the backing from
the protective film
as shown
on the removal tabs, and
place on the device
(A).
Note: The protective
film must be used when
applying MAGICPLATE™
directly to the back of
your device.
Remove the adhesive
backing from the metal
plate and attach the plate
to the protective film on
the device (B).
MAGIC PLATE™
placement for
Qi-enabled
Smartphones
8

MAGICPLATE™ INSTALLATION
OPTION 2
Attach adhesive side of metal
plate directly to back of case.
OPTION 3
Attach adhesive side of metal
plate to interior of case, between
device and inside of case. Plate
will adhere to magnetic mount
through rear panel of case.
NOTE: If choosing not to
attach the metal plate to the device or case,
please leave the adhesive backing
in place.
Position the plate between the device and interior
of case with the metal surface facing the case.
MAGICPLATE™ REMOVAL
Use a thin plastic card to carefully lift the plates adhesive surface
from the mounting surface. Slowly lift up and remove the plate.
Do not use any heat or liquids to remove the plate, due to risk
of damaging your phone
or dash. Contact Scosche Customer
Service for any additional assistance
at 800.363.4490 Ext. 1 or
[email protected].
9

MOUNTING OPTIONS
With the MAGICPLATE™
installed, place your device on
the magnetic top surface
of
the BOOMBOTTLE™ MM (A).
Place the magnetic base of the BOOMBOTTLE™
MM (B) on a flat, magnetic metal surface (C).
For non-magnetic surfaces, attach
MAGICPLATE™ circular metal r-----------.
mounting plate to the surface,
and place the magnetic base
on the plate (D).
Note: BOOMBOTTLE™ MM may also be
attached to a 1/4
11
threaded camera mount.
10

TROUBLESHOOTING*
*NOTE: Make sure your 1OS, Android, or other mobile
device has the latest software installed.
PROBLEM SOLUTION
How to reset
Single-tap MFB, "+" & "-" buttons at the same time.
BOOMBOTTLE™ MM.
BOOMBOTTLE™ MM
Charge the BOOMBOTTLE™ MM. Confirm that
the cables
are securely plugged in. Check battery
is not powering on.
indicator on BOOMBOTTLE™ MM to confirm the
battery
level. Refer to chart on page 5.
Refer to page 5. If the BOOMBOTTLE™ MM has a
How to charge completely dead battery, let it charge for
30 min-
BOOMBOTTLE™ MM.
utes before playing music while the internal battery
is being charged.
Bluetooth profile is
Check your device to confirm that it
not working (HFP,
AVRCP, A2DP are
supports 8/uetooth.
not functioning).
Unable to pair Check that the device you
are attempting to
BOOMBOTTLE™ MM
pair with is Bluetooth compatible. Follow pairing
with
my device. instructions
on pages 6- 7.
Music plays inter-
The BOOMBOTTLE™ MM has a range of approxi-
mittently.
mately 30 feet. For the best quality music keep your
device within range of the BOOMBOTTLE™ MM.
Device is
Confirm that the BOOMBOTTLE™ MM is not paired
connected via
with another Bluetooth device (a Bluetooth connec-
3.5mm cable, but
tion overrides a device connected by cable) . Confirm
no music plays. that
the BOOMBOTTLE™ MM is fully charged.
For complete warranty details, please visit us "'
at www.scosche.com or call [phone] oHS
CE
11

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) This device may notcause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. This transmitter must not be co-located or operating
in conjunction with any other antenna ortransmitter. Changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority
to operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used
in accordance with the instructions, may cause
harmful interference
to radio communications. However, there is no guarantee that
interference will not occur
in a particular installation. If this equipment does cause
harmful interference
to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged
to try to correct the
interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into
an outlet on a circuit different
from that
to which the receiver is connected.
Consult the dealer or
an experienced radio/TV technician for help.
Radiation Exposure Statement: The productcomplies with the FCC/IC
RF Exposure
for Low Power Consumer Wireless Power Transfer.
RF exposure limit set forth for
an uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure that compliance was demonstrated at 10cm
and greater separation from the user body or set the device
to lower output power
if such function is available.
IC STATEMENT
This device complies with Industry Canada's license-exempt RSSs. Operation is
subject
to the following two conditions: (1) This device may not cause interference;
and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
The term "IC:" before the certification/registration number only signifies that
the Industry Canada technical specifications were met. This product meets the
applicable Industry Canada technical specifications.
12