Scott Protege SG User manual

User Guide
087-0065
Rev B
PROTÉGÉ SINGLE GAS MONITOR

Protégé Single Gas
PROTÉGÉ PORTABLE GAS MONITOR
087-0065
Rev B

© 2016 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Protégé, Proton, Scout,
Freedom, Masterdock are registered and/or unregistered marks of Scott Technologies,
Inc. or its affiliates.
All rights reserved. No part of this documentation may be reproduced in any form or
by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from Scott Safety.
Scott Safety reserves the right to revise this documentation and to make changes in
content from time to time without obligation on the part of Scott Safety to provide
notification of such revision or change.
Scott Safety provides this documentation without warranty, term, or condition of any
kind, either implied or expressed, including, but not limited to, the implied warranties,
terms or conditions of merchantability, satisfactory quality, and fitness for a particular
purpose. Scott Safety may make improvements or changes in the product(s) described
in this documentation at any time.
While every effort has been made to ensure accuracy in this guide, no responsibility
can be accepted for errors or omissions. This publication is not intended to form the
basis of a contract, and the company reserves the right to amend the design, content,
and specifications of the detector without notice.
Scott Safety, 4320 Goldmine Road, Monroe, NC 28110, Telephone [phone],
FAX [phone], E-mail scotttechsu[email protected], Web www.scottsafety.com
Microsoft, Windows, Windows 2000, Windows Me, Windows XP, Windows NT,
Windows Vista, Windows 7, Internet Explorer and MS-DOS are either trademarks or
registered trademarks of Microsoft Corporation in the United States and other
countries. Solaris and JAVA are either trademarks or registered trademarks of Sun
Microsystems, Inc. All other products or service names are the property of their
respective owners.
The international transport of this device is regulated under United States export
regulations and may be regulated by the import regulations of other countries.

SCOTT SAFETY 087-0065
087-0065
CONTENTS
About This Guide
Guide Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Guide Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Related Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Certifications and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Warnings and Cautions – Monitor Use and Care . . . . . . . . . . . . . . . . . . . . . . . . xvii
Warnings and Cautions – Sensor Use and Care . . . . . . . . . . . . . . . . . . . . . . . . xviii
Warnings and Cautions – Battery Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . xix
CHAPTER 1 Quick Reference
Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Typical Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Power-Up Sequence Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Basic Operating Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Zero Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Span Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bump Test Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CHAPTER 2 Introduction
Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Monitor Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shipping Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CHAPTER 3 Configuration and Setup
Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the PGD Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Installing the USB driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting the Device to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Monitor Setup on PGD Application Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Sensor Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Monitor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CHAPTER 4Operation
Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Operating the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Pushbuttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Powering Up the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Power-Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

VI CONTENTS
087-0065 SCOTT SAFETY
Monitor LCD Alerts & Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Powering Down the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CHAPTER 5 Maintenance
Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Testing the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Zero Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting the Gas Cylinder to Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Span Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Bump Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Replacing Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Replacing the Lithium Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replacing the Sensor Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
APPENDIX A Specifications
Appendix Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
APPENDIX B Sensor Information
Appendix Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Gas Interferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
APPENDIX C Support
Appendix Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sensor List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

SCOTT SAFETY 087-0065 REV B
087-0065
Rev B
LIST OF FIGURES
1Major Parts of the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2USB Driver Installation (1 of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3USB Driver Installation (2 of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4USB Driver Installation (3 of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5USB Driver Installation (4 of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6Connecting the IR programmer to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7IRDA Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8Connected Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9PGD Application Software Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10 Sensor Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
11 Monitor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
12 Monitor LCD Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
13 Zero Calibration Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
14 Span Calibration- Calibration Adapter Attached . . . . . . . . . . . . . . . . . . . . . 33
15 Span Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
16 Sensor Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
17 Replacing the New Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
18 Screw Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
19 Lithium Battery Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
20 Polarity Orientation (+/-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
21 Pulling out the Old Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
22 Replacing with the New Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

VIII LIST OF FIGURES
087-0065 REV B SCOTT SAFETY

SCOTT SAFETY 087-0065 REV B
087-0065
Rev B
LIST OF TABLES
1Scott Safety Documentation Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
2Protégé Single Gas Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
3Certifications and Approvals for Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
4Certification and Approvals for Monitor (continued) . . . . . . . . . . . . . . . . . . xv
5Sensor Poisons and Contaminants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
6Button Indications in Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
7Major Parts of the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9Factory Default Alarm Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
10 Firmware Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
11 Monitor LCD Items and Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12 Pushbuttons (2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
13 Monitor Power-Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14 Monitor Alerts and Alarms Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
15 Recommended Calibration and Test Matrix . . . . . . . . . . . . . . . . . . . . . . . . 31
16 Replacing the New Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
17 Acceptable Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
18 Protégé Single Gas Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
19 Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
20 Sensor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
21 Gas Interferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
22 Applicable Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
23 Applicable Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

XLIST OF TABLES
087-0065 REV B SCOTT SAFETY

SCOTT SAFETY 087-0065 REV B
087-0065
Rev B
ABOUT THIS GUIDE
Guide Overview This guide instructs gas detection personnel on the features and usage of the Protégé
Single Gas monitoring device, as well as provides information on configuration,
operation, maintenance, specifications and trouble shooting.
This user guide assumes the reader has a basic knowledge of gas detection procedures.
The user guide is divided into the following topics:
•Quick Reference
•Introduction
•Configuration and Setup
•Operation
•Maintenance
•Specifications
•Sensor Information
•Support
Warning: Read, understand and follow the entire content of this guide prior to use.
Failure to do so may result in serious injury or death.

XII ABOUT THIS GUIDE
087-0065 REV B SCOTT SAFETY
Guide Conventions The following visual elements are used throughout this guide, where applicable:
Warning: This icon and text indicate a potentially hazardous situation, which, if not
avoided, could result in death or injury.
Caution: This icon and text indicates a potentially dangerous procedure. Instructions
contained in the warning must be followed. Failure to do so may result in damage to
the device.
This icon and text indicate the possibility of electrostatic discharge (ESD) in a
procedure that requires the reader to take the proper ESD precautions.
This icon and text designates information of special note.

Related Product Documentation xiii
SCOTT SAFETY 087-0065 REV B
Related Product
Documentation
Table 1 lists the Scott Safety Family documentation set.
33339
Revision History Table 2 shows the revision history for this guide, providing a description of the
changes.
Table 1 Scott Safety Documentation Set
DOCUMENT NAME PURPOSE DOCUMENT ID
Protégé Single Gas User
Guide
Provides information on operation and
maintenance on the Protégé Single Gas monitor.
087-0065
Masterdock II User
Guide
Provides information on operation and
maintenance on the Masterdock II station.
087-0060
Portable Gas Detection
Application Software
User Guide
Provides information on installation,
configuration, operation, on the PGD
Application.
087-0061
Table 2 Protégé Single Gas Revision History
REVISION CHANGE
A•Initial release.
B•Page XIV, updated the certification information.

XIV ABOUT THIS GUIDE
087-0065 REV B SCOTT SAFETY
Certifications and
Approvals
Table 3 and Table 4 indicate the monitor has been tested and complies with the
following.
Table 3 Certifications and Approvals for Monitor
MARK
Class I Div I, Groups A, B, C, D
Class I, Zone 0 AEX ia IIC T4 Ga
Intrinsically Safe
Ex ia sécurité intrinsèque
IP 66/67
ATEX certification standards and dates:
EN 60079-0:2012 and EN 60079-11:2012
Ex ia IIC T4 Ga
RoHS Directive
ATEX Directive
EMC Directive
IECEx certification standards and dates:
IEC 60079-0:2011 and IEC 60079-11:2011
Ex ia IIC T4 Ga
Note: The monitors covered in this manual have not been evaluated for
enriched Oxygen atmosphere>21%.
ClassII, Div 1, Groups E, F&G
Only valid without LEL sensor
II 1 G

Certifications and Approvals xv
SCOTT SAFETY 087-0065 REV B
Table 4 Certification and Approvals for Monitor (continued)
MARK
Note: This approval only applies to devices with RF capabilities.
FCC Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
Including interference that may cause undesired operation.
FCC Warning (Part 15.21)
Change or modifications not expressly approved by the party
responsible for compliance could void user’s authority to operate
the equipment.
This portable transmitter with its antenna complies with FCC’s RF
exposure limits for general population/uncontrolled exposure.
The Protégé Single Gas Integrated Transmitter has been assigned
FCC ID # T5E
Compliant with Industry Canada RSS-210.
SUBPART INTENTIONAL RADIATORS
FCC Part 15.247 and OET 65

XVI ABOUT THIS GUIDE
087-0065 REV B SCOTT SAFETY
General Safety
Information
Ensure you adhere to the following for your safety.
Warning: Read and follow the entire content of this guide prior to use. Failure to do
so may result in serious injury or death.
Warning: All individuals who have or will have responsibility for using or testing this
product must read and understand the contents of this manual. The product will
perform as designed only if used and tested in accordance with the manufacturer's
instructions. Failure to follow manufacturer's instructions will render the warranty
and approvals null and void. Failure to follow these instructions may also result in
serious injury or death.
Scott Safety can take no responsibility for use of its equipment if it is not used in
accordance with the instructions. If further operational or maintenance details are
required but not provided in this guide, contact Scott Safety or their agent. Scott
Safety shall not be liable for any incidental or consequential damages in connection
with any modifications, errors or omissions in this guide.
All pertinent state, regional, and local safety regulations must be observed when
installing and using this product. For reasons of safety and to assure compliance with
documented system data, repairs to components should be performed only by the
manufacturer.
Additionally, industry standards, codes, and legislation are subject to change. Updated
copies should be obtained by users to ensure the most recently issued regulations,
standards and guidelines are available.
All pertinent state, regional, and local safety regulations must be observed when
handling and disposing of hazardous material, Toxic (E-Chem) Sensors, Combustible
(LEL) Sensors, batteries and other similar items that may fall under the classification
of hazardous material.
The electrical, electronic and battery elements of this product must not be disposed of
via municipal waste streams; they should be delivered to collection facilities.
Information on collection facilities is given by the local authorities or importer's
representative. Correct disposal will contribute to recycling of materials and prevent
negative consequences for the environment.
For products sold in Europe, the end of life procedures for battery operated electronic
products must comply with the RoHS Directive 2002/95/EC, the WEEE Directive
2002/96/EC and the Battery Directive 2006/66/EC. These directives dictate how to
dispose of the electronic and battery elements of the product after use. For Protégé
products sold in the UK only, Scott Safety Ltd has provided a collection service. This
service can be accessed by Telephoning Customer Services on 01695 711711 who
will be happy to assist. Please do not send products back to Scott. In other parts of
Europe, other systems are in place. Please contact your local provider of Scott
products for more details.
Only use Scott Safety approved replacement parts.

Warnings and Cautions – Monitor Use and Care xvii
SCOTT SAFETY 087-0065 REV B
Warnings and
Cautions – Monitor
Use and Care
Ensure you follow the applicable warnings and cautions indicated here.
Warning: This equipment must be operated and serviced by qualified personnel only.
Read and understand the guide completely before operating or servicing. Qualified
personnel as defined according to local, county, state, federal and individual company
standards.
Warning: When in doubt vacate the area immediately. You should vacate the area
immediately should the monitor indicate a warning or alarm condition. You should
know, understand and follow your company's safety protocols.
Warning: Ensure the atmosphere is free from toxic gases prior to starting any of the
procedures.
Warning: When the primary monitor is off line, ensure you have another online
monitor to actively detect gases. The monitor may be off line due to such activities,
like but not limited to, calibration, installation, maintenance, troubleshooting,
configuration, wiring and other activities.
Warning: If the monitor does not function as described herein, remove from service
and mark for maintenance. Only use Scott Safety replacement parts where applicable.
Warning: Only use the monitor to monitor the atmosphere for the gases and
concentrations for which it is set-up to detect.
Warning: To prevent ignition of an explosive atmosphere, read and adhere to the
manufacturer's live maintenance procedures.
Warning: Read this manual for intrinsic safety precautions. Substitution of
components may impair intrinsic safety, resulting in serious injury or death.
Warning: Perform a bump test every day. Failure to perform a daily functional test
could lead to serious injury or death.
Caution: Monitor will not operate without power applied. Thus, it only detects gases
while powered.
Caution: Periodically test for correct operation of the system's alarm events by
exposing the monitor to a targeted gas concentration above the high alarm set point.
Caution: Verify the gas inlet ports are free of dirt and debris prior to use.
Caution: Do not expose the monitor to severe mechanical or electrical shock. Always
conduct device startup and bump test procedures after such exposure to verify the
monitor's operation and accuracy.

XVIII ABOUT THIS GUIDE
087-0065 REV B SCOTT SAFETY
Warnings and
Cautions – Sensor
Use and Care
Ensure you follow the applicable warnings and cautions indicated here.
Caution: Several cleaners, solvents and lubricants can contaminate and cause
permanent damage to sensors. Before using cleaners, solvents, and lubricants in close
proximity to the detector sensors, read and adhere to the warnings and cautions
indicated here.
Caution: Use only the following recommended products and procedures:
•Use water based cleaners
•Use non-alcohol based cleaners
•Clean the exterior with a soft, damp cloth
•Do not use soaps, polishes, or solvents
Warning: Extended exposure of the detector to high concentrations of toxic gases may
result in degraded sensor performance. If an alarm occurs due to high concentration
of toxic gases, exit to a safe area, bump test, recalibrate if necessary or, if needed, call
us.
Table 5 Sensor Poisons and Contaminants
CLEANERS AND
LUBRICANTS AEROSOLS
Brake cleaners Bug repellents and sprays
Lubricants Lubricants
Rust inhibitors Rust inhibitors
Window and glass cleaners Windows and glass cleaners
Dishsoaps
Citrus based cleaners
Alcohol based cleaners
Hand sanitizers
Anionic detergents

Warnings and Cautions – Battery Use and Care xix
SCOTT SAFETY 087-0065 REV B
Warnings and
Cautions – Battery
Use and Care
Ensure you follow the applicable warnings and cautions indicated here.
Warning: Replace the batteries immediately when the detector emits a low battery
alarm.
Warning: Dispose of used lithium cells immediately. Do not disassemble and do not
dispose of in fire. Do no mix with the solid waste stream. Spent batteries must be
disposed by a qualified recycler or hazardous materials handler.
Warning: Keep lithium cells away from children.
Caution: No attempt should be made to alter or repair the monitor.

XX ABOUT THIS GUIDE
087-0065 REV B SCOTT SAFETY