
Warnings and Safety Instructions
For Domestic Use Only
• Use only 220-240V~50-60Hz power.
• Use indoors only.
• Avoid electrical shock – never immerse the motor or cord into liquid.
• Always operate the chopper well away from water.
• Maintain close supervision when the chopper is used near children.
• Always disconnect chopper from power source when not in use and when assembling or
disassembling.
• Never touch or move any moving parts during operation.
• Never open the chopper when it is operating.
• Never place chopper on hot surfaces.
• Alwaysoperatethechopperonaatsurface.
• Never allow the cord to hang over table edge or bench top.
• Never use chopper if damaged.
• Only remove coaxial blades once chopper has completely stopped.
• Handle blades with care -they are extremely sharp.
• Remove blades before emptying bowl contents.
• Never operate the chopper without a loaded bowl.
• Always use care when cleaning.
• Never operate chopper with a damaged cord or plug.
• Never operate chopper if malfunction occurs.
• Never operate chopper if it is dropped or damaged in any manner.
Service and Questions
• This product is not intended to be operated by persons (including children) with:
• weak physical condition • slow reaction • lack of experience and common sense
unless they are under supervision or instruction by the person who is responsible for their safety.
Maximum Capacity and Working Time
Maximum volume of food (pork, steak, chicken, seafood) - 500 grams. • Only use the chopper in
intervals of 15 seconds or less • Never use the chopper for a total operating time longer than 3
minutes • After 3 minutes use, allow a period of 5 minutes for chopper motor to cool down.
Operating the Maruchi Chopper
Remove all packaging materials, plastic bags, and labels. Please dispose of packaging thoughtfully and
recycle where possible. Clean all componentry apart from the motor body in warm, soapy water. Rinse
and dry thoroughly. Never submerge or wet the motor body or cord when cleaning.
When using your chopper, always follow these steps:
1. Always attach the anti-skid silicon ring to the bottom of the glass bowl.
2. Alwaysusethechopperonaatandevensurface.
3. Always take care placing the sharp coaxial blade assembly into the bowl.
4. Always add food after placing the coaxial blades in place.