EN
EN ::: 7
6
The rechargeable Ni-MH batteries (AAA size,
come with your receiver. Install the batteries before use.
3.6V, 800mAh)
1.
Receiver
2.
3. To replace the battery cover, slide the
cover up until it snaps in place.
The batteries need to be replaced if they don't
recover their full storage capacity after
recharging.
When replacing the batteries, always use some
good quality Ni-MH battery.
Notes:
Installing Batteries
Plug the Rechargeable Ni-MH
battery pack into the battery
compartment.
With this Auto Snap On, the camera will take photos
automatically according to your setting when visitors press the
Call button on the Outdoor station. You then can pick up the
photo easily in the receiver.
If you have unreviewed photos, the backlight on the key will
be on.
of visitor
Menu Description (continued)
Note:
During a conversation, the camera can take a photo of
visitor if you press the Snap key and save it into the
receiver.
During a monitoring, the camera can take a photo of the
view if you press the Snap key and save it into the
receiver.
Up to 50 photos can be stored in the receiver. The
previous ones will be removed automatically if the photos
are exceeding 50 pieces in the receiver.
Chapter 5: Snap Setting
The unique Snap Shot function records up to 50 photos of
whoever visit your home whether you are there or not. To get this
Auto Snap, please set it up in the receiver as follow.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose ,then press
beneath Select.
3.Press Up or Down to choose 1 Photo, 2 Photos,
3 Photos and Off to enable or disable the function.
4.Press beneath Select to save the settings and return to
the previous menu. 19
6
The rechargeable Ni-MH batteries (AAA size,
come with your receiver. Install the batteries before use.
3.6V, 800mAh)
1.
Receiver
2.
3. To replace the battery cover, slide the
cover up until it snaps in place.
The batteries need to be replaced if they don't
recover their full storage capacity after
recharging.
When replacing the batteries, always use some
good quality Ni-MH battery.
Notes:
Installing Batteries
Plug the Rechargeable Ni-MH
battery pack into the battery
compartment.
With this Auto Snap On, the camera will take photos
automatically according to your setting when visitors press the
Call button on the Outdoor station. You then can pick up the
photo easily in the receiver.
If you have unreviewed photos, the backlight on the key will
be on.
of visitor
Menu Description (continued)
Note:
During a conversation, the camera can take a photo of
visitor if you press the Snap key and save it into the
receiver.
During a monitoring, the camera can take a photo of the
view if you press the Snap key and save it into the
receiver.
Up to 50 photos can be stored in the receiver. The
previous ones will be removed automatically if the photos
are exceeding 50 pieces in the receiver.
Chapter 5: Snap Setting
The unique Snap Shot function records up to 50 photos of
whoever visit your home whether you are there or not. To get this
Auto Snap, please set it up in the receiver as follow.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose ,then press
beneath Select.
3.Press Up or Down to choose 1 Photo, 2 Photos,
3 Photos and Off to enable or disable the function.
4.Press beneath Select to save the settings and return to
the previous menu. 19
Receiver
Installing Batteries
The rechargeable Ni-MH battery (3.6V, 800mAh)
come with your receiver. Install the batteries before use.
11
2 Plug the Rechargeable Ni-MH battery
pack into the battery compartment.
3 To replace the battery cover, slide the
cover up until it snaps in place.
Notes:
● The batteries need to be replaced if they don’t
recover their full storage capacity after recharging.
● When replacing the batteries, always use some good quality
Ni-MH battery.
