SCS EV-100 User manual

GROUP SCS
SCS-INST-07-V1_06-2022
EV-100 Damper Interface Panel
wiring details
DANGER:
Risk of electrocution. Works on this equipment should only be carried out by a qualified and
competent electrical person. Observe all electrical safety regulations and safe systems of work.
Check power supply has been isolated or disconnected safely before removing equipment
covers.
INSTRUCTIONS
Wiring details continue on next page
24V Fire & Smoke Dampers (Spring Close)
Addressable
24V Fire Damper
Standalone
24V Fire Damper

GROUP SCS
SCS-INST-07-V1_06-2022
INSTRUCTIONS CONTINUED
230V Fire & Smoke Dampers (Spring Close)
Addressable
230V Fire Damper
Standalone
230V Fire Damper
Modulating Fire & Smoke Dampers (Spring Close)
Addressable
Modulating Fire Damper
Standalone
Modulating Fire Damper
Wiring details continue on next page

GROUP SCS
SCS-INST-07-V1_06-2022
INSTRUCTIONS CONTINUED
24V Smoke Control Dampers (Failsafe in Position)
Addressable
24V Smoke Control Damper
Standalone
24V Smoke Control Damper
230V Smoke Control Dampers (Failsafe in Position)
Addressable
230V Smoke Control Damper
Standalone
230V Smoke Control Damper
Wiring details continue on next page

GROUP SCS
SCS-INST-07-V1_06-2022
INSTRUCTIONS CONTINUED
ATTENTION: Under the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the
responsibility of the installer to ensure installations meet the relevant standards.
Group SCS reserves the right to alter the specification of its products from time to time without notice. Although every effort has been made to ensure the
accuracy of the information contained in this document it is not warranted or represented by Group SCS to be a complete and up-to-date description. For
further information visit www.groupscs.co.uk
Modulating Smoke Control Dampers (Failsafe in Position)
Addressable
Modulating Smoke Control Damper
Standalone
Modulating Smoke Control Damper