Sea Eagle Boats BP12ACC User manual

BP12ACC Single Stage Electric Pump
Inflator for Boats and iSUPs
Instruction & Owner’s Manual
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson, NY 11777
1-800-748-8066
June 2023

1
Sea Eagle Warranty
Sea Eagle products come standard with a 3 year warranty against manufacturing defects.
Complete warranty details can be found at SeaEagle.com/Warranty.
If you receive a damaged item, please call the shipping carrier to report the issue. Do not return damaged merchandise until it has
been inspected by the carrier. Sea Eagle will be notied by the carrier when they have completed their inspection and if
necessary, Sea Eagle will arrange for the repair or replacement of damaged merchandise.
Contact Us
Unlike many other companies today we pride ourselves on answering the phone and helping you with any concerns, questions
or special ordering needs that you may have! Feel free to give us a call at 1-800-748-8066 and we will be happy to talk with you!
Our business hours are Monday to Friday from 9AM to 5PM, EST.
BP12ACC Single Stage Electric Pump for Inflatable Boats and SUPs
The BP12ACC is powered by simply insert the male electrical plug into a 12v DC auxiliary power outlet also known as a car
cigarette lighter. A vehicle may come with several outlets, some in the rear passenger area or the cargo area. These outlets usually
have a plastic cap tethered to them, and are usually labeled as being only for DC power.
Auxiliary power outlets are built into Minn Kota Power Centers and other similar battery boxes.
Caution: Do not run pump more than 20 minutes continuously as this can cause overheating and damage.
Caution: Allow the pump to cool for 20 minutes before restarting it.
Warning! Use pump away from the water and protect from rain to avoid electrical short.
Warning! Do not leave running unattended.
Danger! Keep out of reach of children.
Specications: BP12ACC
Maximum Pressure: Approximately 18 psi (1 bar)
Air Output: 120 L/min
Automatic Stop

2
BP12ACC
Includes the storage bag
with multiple compart-
ments, and inflation hose
with adapter.
Recessed Valve Adapter
Groove in red gasket must
be facing outward. Pull
gasket off and reverse it if
necessary. Gasket may be
stiff upon first use, stretch
or kneed gasket to soften it.
BP12ACC Single Stage E-Pump | SETUP
Screw the hose onto
inflation port on the end of
pump.
An access hole with
protective flap allows hose
to be attached without
taking pump out of bag.
Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • [email protected]
The electric cord has a
power connector. The
center button is the positive
terminal, the sides are the
negative terminal.
The power connector must
be inserted into 12v
accessory power outlet.
In a vehicle, the 12v power
circuit is protected by a
fuse, often rated at 10 to
20 amperes (amps). If the
pump stops working before
inflation is complete, the
fuse may have tripped (see
troubleshooting).
The power connector can
be used with a Minn Kota
Power Center or similar
battery box with battery.
Recessed Valve
Valve stem must be in UP
(valve closed) position.
Insert adapter into the
valve and twist to the right.
The “hooks” on the adapter
will lock it into place.
Set pressure
Turn dial until pointer
indicates desired pres-
sure. Photo shows 3.2 PSI.
Orange numbers are PSI,
white numbers are bars
(metric). Sea Eagle pressure
settings are listed to the
right, or check boat owner’s
manual for correct setting.

3
BP12ACC Single Stage E-Pump | SETUP
Press the ON button to
begin inflation.
The pump automatically
stops once the pressure
is met. Do not turn off
pump.
Keep pump in carry bag to
make transportation easy
and to protect the pump
from sand.
Warning: Do not run
pump for more than 20
minutes. Allow 20 minutes
for cool down before
restarting.
BP12ACC Single Stage E-Pump
PSI Settings for Sea Eagle Boats:
3.0 - 3.5 PSI for: FastTracks, Explorers, PaddleSki, 285fpb, STS10,
FoldCat & Sport Runabouts
8 - 10 PSI for: Travel Canoe, RazorLites
5-10 PSI for: RescueBoard
12-14.5 PSI for: SUPs
Troubleshooting
Problem: Pump does not shut o when inating.
Remove hose. Connect pump to power source. Turn on and
cover red (out) port to block airow. If pump shuts o, it is in
working condition. If pump does not shut o, call Sea Eagle
Customer Service, replacement is needed.
Problem: Pump stops working before ination is complete and
won’t restart. The fuse might be blown. Replace fuse, but do
not use the pump in that auxiliary power outlet.
Problem: Pump smells like it is burning.
Turn pump o and do not try to restart. Unplug from power
supply. Call Sea Eagle Customer Service.
Problem: Pump no longer pumps air and is making unusual noise.
Pumping mechanism has broken, call Sea Eagle Customer
Service.
When calling Sea Eagle Customer Service, please have
pump, hose, adapter and power supply available for
testing and troubleshooting.
BP12ACC Single Stage E-Pump | Troubleshooting
Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • [email protected]