SealerSales U-450 User manual

HAND WRAPPER
OPERATING INSTRUCTIONS
WARNING – PLEASE READ FIRST
Do not put hand near moving parts (heat blade or heat
)
OPERATING INSTRUCTIONS
MODEL: U-450
plate
)
Remove all obstacles which may interfere with machine
functions
Keep work area clean and clear of clutter
Do not sit or stand on machine
Disconnect from power source before performing
maintenance on the machine
When machine is not in use
,
p
lease clean and store
p
ro
p
erl
y
,p p p y
Do not place any electrical parts or plug/cord in water
The cord should be away from heat
Machine may have sharp or pointed edges, use caution
when cleaning
when
cleaning
Machine should only be operated by personnel who can
read, understand and respect warnings and instructions
regarding this machine and the manual
OPERATING TIPS
Check the film rollers to ensure screws are tight
Adjust the stopper for film as needed
When machine is turned “ON”, make sure the pilot lamp
inside the main switch is on
Allow 5-10 minutes for the heat blade and heat plate to
reach the correct temperature
Turning the temperature to the highest setting will shorten
the life of the heaters

LOADING FILM
Draw film through the bottom of the front roller. See diagram.
SPARE PARTS DIAGRAM
HOW TO OPERATE
Put your package on the working table. Draw film and
over your package with the film
Pull your package and film forward. Cut the film with the
heat blade by pushing down
Press film against the bottom of the package and weld the
film on the heat plate.
HOW TO MAINTAIN
Part
Description
Part
Description
HOW TO MAINTAIN
Remove items between the heat blade and rollers
Wipe the heat blade and the top of the heat plate with a
fiber cloth
Part
Description
Part
Description
1 Film Roller 8 PC Board
1A Shaft of Roller 9 Fuse 4A
2 Leading Roller 10 Working Table
2A Shaft of Leading Roller 10A Shaft of Working Table
3 Heater Cutter 11 Power Cord
3A Heater Cutter + Holder 11A Grommet of Power Cord
4 Stopper for Film 12 Rubber Foot
5A Hot Plate Set 13 Bracket Plate
6
Tim
e
r Kn
ob
14
Sc
r
e
w
o
f H
eate
r
Cutte
r
6
eob
Sc e o eate Cutte
7 Power Switch
Distributed By:
Doug Care Equipment, Inc.
PO Box 1058
Springville, CA 93265
559 539-3076 email: [email protected]