SeaLevel SeaRAQ 6510 User manual

1
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
SeaRAQ
™
I/O Modules
User Manual | SeaRAQ™ I/O Modules

2
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
Contents
CONTENTS...........................................................................................................................................................2
INTRODUCTION ................................................................................................................................................... 3
BEFORE YOU GET STARTED ...............................................................................................................................4
INSTALLING SEARAQ™ MODULES .....................................................................................................................5
GENERAL WIRING GUIDELINES ..........................................................................................................................7
SEARAQ™ MODULE COMMON FEATURES.........................................................................................................8
SEARAQ™ HARDWARE DESCRIPTION..............................................................................................................10
APPENDIX A - TEMPERATURE EQUATIONS ....................................................................................................49
APPENDIX B – HANDLING INSTRUCTIONS.....................................................................................................51
APPENDIX C – HOW TO GET ASSISTANCE.....................................................................................................52
WARRANTY ........................................................................................................................................................53

3
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
Introduction
Sealevel SeaRAQ™ modules offer powerful data acquisition solutions that are perfect for a wide range of
applications. SeaRAQ™ modules are available in various digital, analog, and serial I/O configurations. Each
SeaRAQ model is designed for maximum flexibility and easy field wiring.
For easy software integration, application programs or 3rd party software can use the Sealevel SeaMAX™
library or industry standard Modbus RTU protocols.

4
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
Before You Get Started
Advisory Conventions
Warning
The highest level of importance used to stress a condition where damage could result to the
product, or the user could suffer serious injury.
Important
The middle level of importance used to highlight information that might not seem obvious or a
situation that could cause the product to fail.
Note
The lowest level of importance used to provide background information, additional tips, or other
non-critical facts that will not affect the use of the product.
Industry Segments
SeaRAQ™ modules are perfect for a wide variety of applications and environments including:
•Process Control
•Data Acquisition
•Broadcast Automation
•Security
•Facility Management
Features
•Supports Industry Standard Modbus RTU Protocol
•Models Offering Choice of:
o Optically Isolated Inputs
o Form A Relay Outputs
o Form C Relay Outputs
o Isolated Analog A/D & D/A
o Thermocouple and RTD inputs
•Field Removable Terminal Block Connectors
•Extended Temperature Range (-40°C to +85°C)

5
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
SeaRAQ Products in This Manual
Model # Description
6510 8 Channel-to-Channel Isolated Analog Inputs
6511 6 Channel Isolated RTD Analog Inputs
6512 6 Channel Isolated Thermocouple Inputs (Type E, J, or K)
6513 8 Channel Isolated Analog Inputs
6520 8 Channel-to-Channel Isolated Analog Outputs
6525 4 Channel-to-Channel Isolated Analog Outputs
8510 16 Channel Isolated Digital Inputs
8511 16 Channel Isolated AC Digital Inputs (0-132 VAC)
8512 16 Isolated Digital Inputs 4 Form C Relay Outputs
8520 16 Channel Isolated Form A Relay Outputs (5-30 VDC; 5-250 VAC)
8521 8 Channel Isolated Form A Relay Outputs
Installing SeaRAQ™ Modules
The computer system must be shut down before any I/O expansion cards are inserted or removed.
Ensure the front Power LED is OFF before adding or removing any I/O cards. 1
Installing SeaRAQ™ modules is a simple matter of selecting a slot on the rear of the unit then removing
the blank plate of the slot that you want to insert the module. Slide the card down the card guide and
then seat into the connector in the rear of the slot, then tighten the thumbscrews into the chassis.
1Backplane may also be powered down via Sealevel Talos software.

6
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
1. Loosen screws to blank plate:

7
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
2. Slide card down guide rails into socket:
3. Tighten screws on top and bottom of bracket to securely mount the card.
General Wiring Guidelines
In addition to the following wiring suggestions, we strongly urge that you follow all wiring and safety
codes that apply to your area or your type of equipment. In the United States, most areas have
adopted the National Electrical Code standard and specify that all wiring conform to its
requirements. In other countries, different codes will apply. For maximum safety to personnel and
property, you must follow these codes. Failure to do so can lead to personal injury or death, property
damage or destruction, or both.
Color Coding Wires
The following color codes are commonly used in industrial equipment manufactured in the United
States. They are listed here as a reference. Where they are in conflict with codes that apply to your area
or your type of equipment, you should follow your applicable codes instead. Besides satisfying code
requirements, wire color-coding makes testing and troubleshooting safer, faster, and easier.
Green or green with stripe – Ground
Black – Primary AC
Red – Secondary AC
Blue – DC
White – Common or neutral

8
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
Yellow – Secondary power source not controlled by the main disconnect. Alerts
maintenance personnel that there may be power present (from an external source) even if
the equipment is disconnected from its main power source.
Wire Routing
To reduce noise coupling from external sources, it is recommended you keep electrically noisy wiring,
such as AC power wiring and Discrete Output Module wiring, physically separated from low-level signal
wiring such as DC and Analog Input module wiring or communications cables. This can be
accomplished by grouping separately, where practical, the following categories of wiring:
Analog Input or Output Module wiring. This wiring should be shielded to further reduce
noise coupling.
Communications Cables. Wiring such as Ethernet, USB, or serial communications cables
should be kept away from noise-producing wiring.
DC Input Module wiring. Although suppressed internally, these low-level inputs should be
further protected against noise coupling by observing these wiring practices.
Discrete Output Module wiring. These often switch inductive loads that produce noise
spikes when switched off.
Where AC or Output wiring bundles must pass near noise-sensitive signal wiring bundles, avoid running
them parallel with each other. Route them so that, if they have to cross, they do so at a right angle. This will
minimize possible coupling between them.
SeaRAQ™ Module Common Features
Most SeaRAQ™ modules include the same connectors and are designed for the Sealevel R3 and R4
systems. You can remove the terminal block from the module in order to wire it, if desired. Then, when
you are finished wiring it, you can easily reinstall it on the module. However, some prefer to leave it on
the module when wiring. If you ever need to replace a module, you do not have to do any rewiring.
Simply remove the wired terminal block from the old module and install it on the new module. The
terminal block screw terminals are also convenient points for measuring voltages while testing or
troubleshooting.
MODBUS Numbering Convention, Error Codes, and CRC Calculations
Since Modbus was initially created to talk to PLCs and they wanted things to make sense to technicians
that were accustomed to ladder logic, Modbus applications start numbering registers, coils, inputs, etc.
as number one. The applications then subtracted one from all of the addresses to pass to the actual
PLC. Therefore, in all of the following messages, we have started addressing the register, coils, inputs,
etc. starting at address zero.
When you send a Modbus message, you will get back either a good response or an error code. The
error codes are defined in “Modbus Error Codes”.
All Modbus/RTU messages end with a two character CRC (Cyclic Redundancy Check). The CRC is 16 bits
long and can be calculated as shown in “CRC Calculation”.

9
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
The Modbus message format documents can be obtained from www.modbus.org and are documented
in the Modbus Application Protocol Specification.
Definition of Positive and Negative Logic
The IEC definitions for positive logic and negative logic, as applied to SeaRAQ™ I/O modules, are defined
as follows.
Positive Logic - Input Modules
Input modules designed with positive logic characteristics sink current from the input device
to the user common or negative power bus. The input device is connected between the positive
power bus and the input terminal.
Positive Logic - Output Modules
Output modules designed with positive logic characteristics source current to the loads from
the user common or positive power bus. The load is connected between the negative power
bus and the module output.
Negative Logic - Input Modules
Input modules designed with negative logic characteristics source current through the input
device to the user common or positive power bus. The input device is connected between the
negative power bus and the input terminal.
Negative Logic - Output Modules
Output modules designed with negative logic characteristics sink current from the loads to the
user common or negative power bus. The load is connected between the positive power bus
and the output terminal.

10
© Sealevel Systems, Inc. SeaRAQ Modules Manual | SL9253 5/2023
SeaRAQ™ Hardware Description
6510 - 8 Channel-to-Channel Isolated Analog Inputs
The SeaRAQ™ 6510 supports two input analog voltage ranges 0-5VDC and 0-10 VDC as well as 0-20mA
input on each of its 8 isolated channels.
Specifications
Input Range 0-20ma, 0-5 VDC, 0-10 VDC
Update Rate <0.1 Seconds (all points on card)
Resolution 5 µA
Impedance 250 Ohms
Maximum Error (Accuracy) 0.05% Full scale (0.01ma)
Linearity
0.02% Full Scale
Isolation (Field Side to Logic)
1500 VAC RMS