Sealey HVF18IS User manual

INSTRUCTIONS FOR
INDUSTRIAL HIGH VELOCITY FAN WITH
INTERNAL OSCILLATION 18”
MODEL NO: HVF18IS
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
HVF18IS | Issue:2(H, 4) 08/11/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Indoor use only
1. SAFETY
1.1. ELECTRICAL SAFETY
WARNING! It is the user’s responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and
all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products. You may obtain an RCD by contacting your local Sealey dealer.
If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable
Appliance Test) tested.
Electrical safety information, it is important that the following information is read and understood.
1.1.1. Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
1.1.2. Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
1.1.3. Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is tted with the
correct fuse - see fuse rating in these instructions.
8DO NOT pull or carry the appliance by the power cable.
8DO NOT pull the plug from the socket by the cable.
8DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is
replaced immediately by a qualied electrician.
1.1.4. This product is tted with a BS1363/A 13 Amp 3 pin plug.
If the cable or plug is damaged during use, switch the electricity supply and remove from use.
Ensure that repairs are carried out by a qualied electrician.
Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualied electrician.
a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to the live terminal ‘L’.
c) Connect the BLUE neutral wire to the neutral terminal ‘N’.
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
Sealey recommend that repairs are carried out by a qualied electrician.
1.1.5. If an extension reel is used it should be fully unwound before connection. A reel with an RCD fitted is
preferred since any appliance plugged into it will be protected. The cable core section is important and
should be at least 1.5mm², but to be absolutely sure that the capacity of the reel is suitable for this product and for others which
may be used in the other output sockets, we recommend the use of 2.5mm² section cable. If extension reel is to be used outdoors,
ensure it is marked for outdoor use.
1.2. GENERAL SAFETY
9999 Disconnect the fan from the mains power when not in use and before servicing or performing any maintenance.
9999 Use the fan in dry areas only. DO NOT use in wet or areas with high condensation such as showers, pools etc.
999 WARNING! If a fan falls into water or other liquid, immediately switch off and disconnect from the mains power supply. DO NOT touch
the fan until the mains power supply has been disconnected.
9999 Always disconnect the fan from the power supply when moving it from one location to another and ensure fan is stood on a level
surface.
9999 The fan air flow is powerful. Before use ensure that there is nothing nearby that will be damaged or displaced by the stream of air.
9999 Keep the fan clean and maintained in good condition. For motor service contact an authorised service agent.
9999 Use recommended parts only. Unapproved parts may be dangerous, and will invalidate your warranty.
9899 DO NOT operate the fan where there are explosive or flammable gases, fumes or other hazardous substances.
9899 DO NOT stand the fan on the power cable.
9899 DO NOT insert any objects through the fan guard.
9899 DO NOT cover the fan when in use.
9899 DO NOT immerse the fan in water or any other liquid.
9899 DO NOT allow children to operate the fan.
9899 DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.
9899 DO NOT use the fan outdoors.
9899 DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.
9999 When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof
location.
Recommended fuse rating
13 Amp

NOTE: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. INTRODUCTION
High velocity fan suitable for movement of huge volumes of air. Features new patented design whereby blades internally oscillate safely within
the fan body, enabling the fan to cover more than twice the area of a non-oscillating model. Carefully balanced blades provide constant airflow
to complete area, whereas a standard oscillating fan covers only 1/4 of the area at any one time. Three-speed power selection with switchable
oscillation control. Robust cradle stand enables secure positioning. Suitable for use in industrial, commercial, agricultural, automotive workshop and
showroom applications.
3. SPECIFICATIONp
Model no:.................................................................... HVF18IS
Fan Ø: .................................................................. 450mm (18”)
Speeds: ...................................................................................3
Power: ............................................................................... 58W
Supply: ............................................................................. 230V
Current: ........................................................................... 0.25A
Weight: ...........................................................................6.56kg
4. OPERATIONo
WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using fan.
4.1. Check that the speed control is set to “0” (off) and then plug into the mains power supply and switch the power on.
4.2. The fan features 3 speeds which are selectable using the switch located at the back of the fan above the motor. Settings 1 or 2 will suit
most needs, 3 is used for maximum air movement.
4.3. Use the switch on the side of the motor to turn the oscillation function on and off, see fig.1.
4.4. Adjust the direction of the air flow by moving the base from side to side and tilting the fan up or down.
4.5. When you have finished using the fan ensure you turn the speed control switch to “0” (off) and disconnect the fan from the mains
power.
5. MAINTENANCE
WARNING! Ensure that the fan is disconnected from the mains power
supply before attempting any of the following:
5.1. Use a soft, damp cloth to clean the fan. DO NOT immerse the fan in water
and never allow water to drip onto the motor housing.
8DO NOT use solvents, petroleum, paint thinner or other chemicals to clean
the fan. To clean the fan blade, undo the six screws around the circumference,
remove the front cover and clean the blade with a slightly damp cloth.
5.2. Replace the front grille and refit the six screws.
5.3. Should the motor, switch or the power lead require service or maintenance
contact your local service agent.
5.4. When not in use place the fan in its original box or otherwise cover to protect
from dust, and store in a safe, dry, childproof location.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
g.1
HVF18IS | Issue:2(H, 4) 08/11/17
Original Language Version
© Jack Sealey Limited