Sears Ty Pennington Style Quincy Chaise D71 M20452 User manual




Product Code:D71 M20452
KSN:08763185-9
UPC Code:717598004623
Date of Purchase: / / .



Thank you for your purchase
Thank you for your purchase!
We are pleased that you have chosen Sears for your outdoor furniture
purchase. We hope that you enjoy the unmatched quality, comfort, and
style of your new patio set. Every piece is meticulously considered all the
way down to the smallest details, exclusively for you, by our world class
design team. We know you have a choice when it comes to your patio
furniture needs, so from our team to yours, thank you for letting us be a part
of your outdoors. 
TableofContents

Table of Contents…………………………2
Safety Information…………………….….3
Set Up your Furniture Properly……....3
Examine your Furniture……………..…3
Warranty………………………………...…..3
What is Covered…………………………3
What is Not Covered……………….……3
Care and Maintenance…………….……….4
Pre-Assembly……………………………......4
Planning Assembly………………………..4
Hardware Included………………………..4~5
Observe weight Limits…………………….5
Package contents………………………….5
Assembly Instructions
Quincy Chaise……………………………..6~9




2


5 years limited warranty on PS wood – against rot, decay, splintering and termite
infestation.
1 year limited product warranty.
WHAT IS COVERED
Product is warranted to the original purchase to be free from defects in material or
workmanship for a period of 1 year / 5 years respectively from date of original
retail purchase. The word “defects” is defined as imperfections that impair the use
of the product. Defects resulting from misuse, abuse or customer negligence will
void this warranty.
WHAT IS NOT COVERED
This warranty does not cover defects due to alteration of accident. This warranty
does not cover damage caused by Vandalism, resting, “acts of nature” or any
other event beyond the control of the manufacturer.
This warranty does not cover scratching, scuffing or other cosmetic damage that
may result from normal use of the product. In addition, defect resulting from
intentional damage, customer negligence or unreasonable use will void the
warranty.
Liability for incidental or consequential damages is excluded to the extent
permitted by law. While every attempt is made to embody the highest degree of
safety in all products, freedom from injury cannot be guaranteed. The user
assumes all risk of injury resulting from the use of this product. All merchandise is
sold on this condition and no representative of company may waive of change this
policy.
Customer Service1-800-797-3128
3


By following the instruction below, you new product should provide you with years
of service and enjoyment.
The metal frame is painted with strong durable “powder-coat” paint. If the paint
should chip, sand the area lightly. Then paint over that area with a rust proof
primer followed by an enamel spray paint.
The panels are stain- and solvent-resistant. Most stains can be removed, using a
mild soap and a soft-bristled brush.
Abrasive cleaning material may scratch the plastic and are not recommended.
Avoid placing a direst heat source on or near surfaces unless using a heat barrier.


PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly, check all
components and hardware by parts list as below before assembly. It takes about 10
minutes for two persons to complete all the assembly.
The recommended weight limits is list below:
Chaise:300lbs



4

Pre-Assembly(continued)
Part Description Size QTY.
F Short bolt 1/4”*15MM 6
G Bolt 1/4”*20MM 4
H Long bolt 1/4”*50MM 2
I Hex nut 2
J Pipe plug 4
K Washer 2
L Allen wrench 4MM 1
M Hex wrench 1
Packing content


PART DESCRIPTION QTY.
A SIDE PANEL 2
B BACK SEAT PANEL 1
C BACKREST 1
D FRONT SEAT PANEL 1
E FRONT LEG 1


DON’TFULLYTIGHTENALLBOLTSINDECATEDSTEP2.

5


1Attaching side panels to back seat panel
ATTACH SIDE PANEL “A” TO BACK SEAT PANEL “B”. FASTEN WITH BOLT “G”AND
PIPE PLUG “J”, TIGHTEN HALF THE WAY USE ALLEN WRENCH “L”.
 
G(X4)J(X4)

A
A
G
H
6

2Attaching the backrest panel, tighten all the bolts
ATTACH BACKREST PANEL “C” TO SEAT PANELS, FASTEN WITH BOLT “H” ,
WASHERS “K” AND HEX NUT “I”. TIGHTEN HALF THE WAY USE ALLEN WRENCH
“L” AND HEX WRENCH “M”.





C
B
H
I
K
7


3Attaching front leg to front seat panel
LAY FRONT SEAT PANEL “D” UPSIDE DOWN, ATTACH FRONT LEG “E” TO SEAT
PANELS, FASTEN WITH BOLT “F”. TIGHTEN HALF THE WAY USE ALLEN WRENCH
“L”.

F(X4)








‐



F
D
E
8


4Attaching front seat panel to back seat panel
ATTACH FRONT SEAT PANEL “D” TO BACK SEAT PANEL “A”, FASTEN WITH BOLT
“F”. TIGHTEN HALF THE WAY USE ALLEN WRENCH “L”.
CHECK AND MAKE ADJUSTMENTAS NEED, USINGALLEN WRENCH “L” AND HEX
WRENCH “M” FULLY TIGHTEN ALL THE BOLTS.

F(X2)




 F
D
B
9



























Please refer to part numbers when reordering
For questions or comments about product:
Email: [email protected] or Call toll-free:1-800-797-3128
between 9:00 a.m. and 4:00 p.m. Pacific time
Or visit our website: www.duramen.us
Made in / Hech en CHINA
Distributed by Sears, roebuck and co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
On-line at www.sears.com and www.kmart.com