Seconique LINDON DINING TABLE User manual

LINDON DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SH/07/21/SF1
Page 01
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT WITH WET OR
DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
IMPORTANT

HARDWARE LIST
SEC/SH/07/21/SF1
Page 02
PARTS LIST
A
B
C
D
4PCS
1PC
8PCS
4PCS
Bolt M10x50mm
Allen Key M8
Bolt M6x16mm
Metal Washer M10x22
HARDWARE NAME QTY
REF
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
Part Code
Part Number Part Description Quantity Carton
1
2
3
S400-403-052-SF1-01 Table Top 11/1
Support Bar
Table Leg
S400-403-052-SF1-02
S400-403-052-SF1-03
1
4
1/1
1/1
E4PCS
Adjustable Foot
123
F8PCS
Metal Washer M6x16
G1PC
Allen Key M5

STEP 1
STEP 2
SEC/SH/07/21/SF1
Page 03
2 - x1
SUPPORT BAR
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A04
3 - x4
TABLE LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
C08
1 - x1
TABLE TOP
E04
F08
AB
D
EG
C
F
M10x50mm
M6x16mm
D04
3
3
3
3
2
M10x50mm
M6x16mm
1

LINDON DINING CHAIR
ASSEMBLY INSTRUCTIONS
Page 01
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT WITH WET OR
DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
IMPORTANT
SEC/SW/07/21/SF1

QTY
4 PCS
1 PC
4 PCS
A
C
BM6x18
M4
REF PART NAME
HARDWARE LIST
SEC/SW/07/21/SF1
Page 02
PARTS LIST
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
12
Bolts M6x12mm
Metal Washer
Allen Key
Part Number Part Description Quantity Carton
1
2
Chair Seat 11/1
Chair Leg 11/1

STEP 1
STEP 2
SEC/SW/07/21/SF1
Page 03
1 - x1
CHAIR SEAT
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
1
Please remove the white plastic cap
and keep the black washer before
you start to asssemble it, thanks.
2
1
A
B
C
1 - x1
CHAIR SEAT
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A04
B04
2 - x1
CHAIR LEG