overstock Leisure Chair User manual

Label Picture Description QTY
A Chair Seat 1
B Pressure Cylinder 1
C Chromed Base 1
Caution : You must read this before you proceed
Leisure Chair
Page 1 OF 4

Overview
Before
Beginning
Assembly:
This Leisure Chair has multiple parts and may require up to 30
minutes to assemble. To give you an overview of the Leisure
Chair parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Chair Seat(A)
Pressure Cylinder(B)
Chromed Base(C)
FRONT FACING
Page 2 OF 4

Step 1
Step 2
Step 3
Step 4
.
Hit the Pressure Cylinder(B) into the Chromed Base(C) Hole with hammer.
Put the Pressure Cylinder(B) with the Chromed Base(C) into the mounting
position under the Chair Seat(A).
Unpack and place all parts on a clean, non-marring surface.
Insert the Pressure Cylinder(B) into the Chromed Base(C)
mounting position.
Page 3 OF 4

Make sure all parts are connected and securely locked into position.
Your chair is ready for use.
Caution: This Leisure Chair can only be used on a flat, level surface.
Page 4 OF 4