Seconique LOGAN DINING TABLE User manual

LOGAN DINING TABLE
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY
AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME.
THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO
NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
PAGE 1 OF 3
DO NOT
USE
SEC/SH/02/18/PU1
FOR DOMESTIC USE ONLY

PARTS LIST
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE
YOU START ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS
MISSING, DO NOT CONTINUE ASSEMBLY. PLEASE CONTACT YOUR
SUPPLIER IMMEDIATELY.
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST
NO.
P1
P2
NO.
1
2
3
4
QTY
1PC
4PCS
QTY
8PCS
8PCS
8PCS
1PC
DESCRIPTION
DESCRIPTION
TABLE TOP
LEGS
ALLEN KEY
HARDWARE LIST
PAGE 2 OF 3
P2
P2
P2
P2
O8 X 50MM ALLEN BOLT
O8 X 17MM FLAT WASHER
O8 X 13MM SPRING WASHER
P1
SEC/SH/02/18/PU1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 3 OF 3
STEP 1 STEP 2
YOU WILL NEED:
12
34
8PCS 8PCS
8PCS 1PC
P1
P1
P2
P2
P2
P2
P2
1
3
4
2
2
REPEAT THIS ASSEMBLY FOR EACH LEG
SEC/SH/02/18/PU1

LOGAN DINING CHAIR
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY
AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME.
THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO
NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
PAGE 1 OF 3
SEC/SH/02/18/PU1
DO NOT
USE
FOR DOMESTIC USE ONLY

PARTS LIST
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE
YOU START ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS
MISSING, DO NOT CONTINUE ASSEMBLY. PLEASE CONTACT YOUR
SUPPLIER IMMEDIATELY.
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST
NO.
1
2
3
4
5
NO.
A
B
C
D
E
QTY
2PCS
4PCS
2PCS
2PCS
4PCS
QTY
12PCS
12PCS
12PCS
16PCS
1PC
DESCRIPTION
DESCRIPTION
CHAIR BACK
JCBC BOLTS
SIDE STRETCHERS
SPRING WASHER
FRONT SECTION
FLAT WASHER
SEAT
SCREW
BOTTOM STRETCHERS
ALLEN KEY
HARDWARE LIST
PAGE 2 OF 3
1
2
23
5
4
SEC/SH/02/18/PU1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 3 OF 3
STEP 1
E
EA
D
B
C
A
D
D
BC
1
25
3
3
4
1
5
STEP 2
D
D
PHILLIPS
SCREWDRIVER
Please Repeat
For Both Sides
1
2
555
SEC/SH/02/18/PU1