Security Camera King DS-2CD63C5G0-IVS User manual

Network Fisheye Camera
User Manual
UD04753B-A

User Manual of Network Fisheye Camera
1
Initiatives on the Use of Video Products
Thank you for choosing Hikvision products.
Technology affects every aspect of our life. As a high-tech company, we are
increasingly aware of the role technology plays in improving business efficiency and
quality of life, but at the same time, the potential harm of its improper usage. For
example, video products are capable of recording real, complete and clear images.
This provides a high value in retrospect and preserving real-time facts. However, it
may also result in the infringement of a third party's legitimate rights and interests if
improper distribution, use and/or processing of video data takes place. With the
philosophy of "Technology for the Good", Hikvision requests that every end user of
video technology and video products shall comply with all the applicable laws and
regulations, as well as ethical customs, aiming to jointly create a better community.
Please read the following initiatives carefully:
●Everyone has a reasonable expectation of privacy, and the installation of video
products should not be in conflict with this reasonable expectation. Therefore, a
warning notice shall be given in a reasonable and effective manner and clarify the
monitoring range, when installing video products in public areas. For non-public
areas, a third party's rights and interests shall be evaluated when installing video
products, including but not limited to, installing video products only after
obtaining the consent of the stakeholders, and not installing highly-invisible video
products.
●The purpose of video products is to record real activities within a specific time and
space and under specific conditions. Therefore, every user shall first reasonably
define his/her own rights in such specific scope, in order to avoid infringing on a
third party's portraits, privacy or other legitimate rights.
●During the use of video products, video image data derived from real scenes will
continue to be generated, including a large amount of biological data (such as
facial images), and the data could be further applied or reprocessed. Video
products themselves could not distinguish good from bad regarding how to use
the data based solely on the images captured by the video products. The result of
data usage depends on the method and purpose of use of the data controllers.
Therefore, data controllers shall not only comply with all the applicable laws and
regulations and other normative requirements, but also respect international
norms, social morality, good morals, common practices and other non-mandatory
requirements, and respect individual privacy, portrait and other rights and
interests.
●The rights, values and other demands of various stakeholders should always be
considered when processing video data that is continuously generated by video
products. In this regard, product security and data security are extremely crucial.

User Manual of Network Fisheye Camera
2
Therefore, every end user and data controller, shall undertake all reasonable and
necessary measures to ensure data security and avoid data leakage, improper
disclosure and improper use, including but not limited to, setting up access control,
selecting a suitable network environment (the Internet or Intranet) where video
products are connected, establishing and constantly optimizing network security.
●Video products have made great contributions to the improvement of social
security around the world, and we believe that these products will also play an
active role in more aspects of social life. Any abuse of video products in violation
of human rights or leading to criminal activities are contrary to the original intent
of technological innovation and product development. Therefore, each user shall
establish an evaluation and tracking mechanism of their product application to
ensure that every product is used in a proper and reasonable manner and with
good faith.

User Manual of Network Fisheye Camera
3
User Manual
COPYRIGHT ©2021 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries
(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be
“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless
otherwise stipulated, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Network Fisheye Camera.
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the company
website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

User Manual of Network Fisheye Camera
4
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT
IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE
LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a

User Manual of Network Fisheye Camera
5
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose
of it at designated collection points. For more information see:
www.recyclethis.info.

User Manual of Network Fisheye Camera
6
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with 12 VDC or 24 VAC (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform

User Manual of Network Fisheye Camera
7
to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if
the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions:
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp.
The strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C ~ 60°C, or -40°C ~ 60°C if the camera
model has an “H” in its suffix), dusty or damp environment, and do not expose it
to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
Keep the camera away from water and any liquid.
While shipping, the camera should be packed in its original packing.

User Manual of Network Fisheye Camera
8
Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.
Notes:
For the camera supports IR, you are required to pay attention to the following
precautions to prevent IR reflection:
Dust or grease on the dome cover will cause IR reflection. Please do not remove
the dome cover film until the installation is finished. If there is dust or grease on
the dome cover, clean the dome cover with clean soft cloth and isopropyl alcohol.
Make certain the installation location does not have reflective surfaces of objects
too close to the camera. The IR light from the camera may reflect back into the
lens causing reflection.
The foam ring around the lens must be seated flush against the inner surface of
the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera
body so that the foam ring and the dome cover are attached seamlessly.

User Manual of Network Fisheye Camera
9
Table of Contents
Chapter 1 System Requirement..........................................................................12
Chapter 2 Network Connection..........................................................................13
2.1 Setting the Network Camera over the LAN...................................................... 13
2.1.1 Wiring over the LAN .......................................................................................................13
2.1.2 Creating a Password........................................................................................................14
2.2 Setting the Network Camera over the WAN .................................................... 20
2.2.1 Static IP Connection........................................................................................................20
2.2.2 Dynamic IP Connection...................................................................................................21
Chapter 3 Access to the Network Camera...........................................................24
3.1 Accessing by Web Browsers............................................................................ 24
3.2 Accessing by Client Software .......................................................................... 25
Chapter 4 Live View ..........................................................................................26
4.1 Live View Page............................................................................................... 26
4.2 Starting Live View.......................................................................................... 30
4.3 Recording and Capturing Pictures Manually.................................................... 32
4.4 Operating PTZ Control.................................................................................... 33
4.4.1 PTZ Control Panel............................................................................................................33
4.4.2 Setting/Calling/Deleting a Preset ...................................................................................35
4.4.3 Setting/Calling/Deleting a Patrol....................................................................................37
Chapter 5 Network Camera Configuration ........................................................39
5.1 Configuring Local Parameters ......................................................................... 39
5.2 Configuring System Settings ........................................................................... 41
5.2.1 Viewing Basic Information..............................................................................................41
5.2.2 Time and DST Settings....................................................................................................42
5.2.3 RS-232 Settings ...............................................................................................................44
5.2.4 RS-485 Settings ...............................................................................................................45
5.2.5 Upgrade and Maintenance .............................................................................................46
5.2.6 Log Searching..................................................................................................................47
5.2.7 System Service Settings ..................................................................................................48
5.2.8 Authentication................................................................................................................49
5.2.9 IP Address Filter..............................................................................................................49
5.2.10 Security Service...............................................................................................................51
5.2.11 User Management ..........................................................................................................51
5.2.12 Open Source Software License .......................................................................................54
5.3 Configuring Network Settings......................................................................... 55
5.3.1 Configuring TCP/IP Settings ............................................................................................55