SEDONA TimmyZzz Series User manual

SEDONA TimmyZzz User Manual
Engineer Version 1.0
Operating Elements
Front Side
1. Display
2. Power ON and OFF
3. Mode (select program)
4. + Key (increases intensity)
5. - Key (reduces intensity)
Display Panel
6. Program Type
7. Output Intensity
1
2
3
4
5
6
7

Back Side
8. Battery Cover
9. AAA Battery Compartment
8
9

Power Supply
Open the battery cover; place the two AAA batteries into the compartment; close
the battery cover. After press the ON/OFF button (if the device doesn’t turn on then
batteries are empty, please swap the batteries for two new AAA batteries.)
1. Open the battery cover
2. Place the two AAA batteries into the compartment
3. Close the battery cover

Start Up Your Device
Press the ON/OFF button to boot up
the unit. The display panel back light
will turn on. Then press the M (mode)
button to select the desired program.
Press “+” or “-” to set the intensity.
(Make sure the unit is connected to
the pillow otherwise the unit will
automatically shut down)
Make sure inductor is connected
Press the ON/OFF button Press the M button
Press the “+” button

Program
Frequency
Intensity
Intensity
Program
Frequency
From
To
A
3Hz
1.18ms
7.92ms
B
7.8Hz
0.94ms
6.36ms
C
25Hz
0.7ms
4.8ms
D
50Hz
0.48ms
3.4ms