seeed studio BitCar User manual

Assembly
Instruction
组装说明
B
A

1x Chassis
(车架)
1x Rear Universal Wheel
(后万向轮)
1x Front Universal Wheel
(前万向轮)
1x Battery Holder
(电池盒)
Preparation (准备工作)
1x Ultrasonic Sensor
(超声波传感器)
6x M3x6mm Screws
(M3*6mm 螺丝)
2x 3M Sticker
(3M胶)
1x M3*60mm Coupling Nut
(M3*60mm铜柱)
1

1x micro:bit - not included
(micro:bit控制板 - 不含在套件内)
1x Scew Driver
(螺丝刀)
2x Wheels
(车轮)
2x Side Acrylic Plates
(侧边亚克力板)
1x Front Acrylic Plate
（前端亚克力板）
1x Rear Acrylic Plate
(尾部亚克力板)
3x AAA电池 - not included
(7号干电池 - 不含在套件内)

Front & Rear Wheel (前&后万向轮)
Rear universal wheel (后万向轮)
You’ll need
(你需要准备)
2x M3x6mm screws (M3*6mm 螺丝)
Chassis (车架)
2x M3x6mm screws (M3*6mm 螺丝)
Front universal wheel (前万向轮)
2
1
1
2
2
4
4
4
5
3
3

Battery Holder (电池盒)
3x AAA batteries
(7号干电池)
2x 3M sticker
(3M胶)
*Battery holder
(电池盒)
* Put the battery holder as close as possible
to the back universal wheel, otherwise the
Bitcar may fail to stand up.
（* 安装时使电池盒尽可能的靠近后万向轮，
否则可能会影响 BitCar 小车站立）
Not included
3
You’ll need
(你需要准备)
1
1
2
2
3
3

Motor shaft through the ‘D’ hole
(电机转轴插入D型孔)
4Left & Right Wheels (左右车轮) You’ll need
(你需要准备)
Left wheel
(左车轮)
Right wheel
(右车轮) 1
1
1

2x M3x6mm screws
(M3*6mm 螺丝)
Rear acrylic plate
(尾部亚克力板)
2x Side acrylic plates
(侧边亚克力板)
Front acrylic plate
(前端亚克力板）
M3*60mm coupling nut
(侧边亚克力板)
5Acrylic Plates (亚克力板) You’ll need
(你需要准备)
1
1
2
2
4
4
6
5
5
3
3

* The micro:bit is not included in this kit.
（* micro:bit 控制板不包含在此套件内）
6Connect micro:bit (连接micro:bit 控制板) You’ll need
(你需要准备)
*micro:bit
(micro:bit 控制板 ) 1
1

7Connect Ultrasonic Sensor (连接超声波传感器)
You’ll need
(你需要准备)
1
1Ultrasonic Sensor
(超声波传感器)

8Complete (完成)

9Quick Start with MakeCode (MakeCode快速上手指南)
1. Go to makecode.microbit.org
(前往 makecode.microbit.org)
3. Added package will look like this:
(添加后的扩展积木将如下图所示)
2. Add ‘BitCar’ extension by keyword ‘bitcar’or ‘github URL’
(通过搜索关键字‘bitcar’或 ‘github URL’ 添加‘BitCar’ 积木扩展)
Github URL:                           
Extensions
github.com/CH-MAKER-Ed/pxt-BitCar

Thank you for using BitCar and learn coding with it. To improve user experience and
deliver better product for STEAM education, if you have any problem or any feedback,
please contact us with email or via our social media.
感谢您使用柴火的 BitCar 编程小车。为了提供更优质的STEAM教育产品，如果您对我们的
产品有任何意见或建议，可以通过我们的微信公众号或邮箱联系我们。
Wechat (微信公众号) : 柴火创客校园
Email (邮箱): [email protected]
柴火创客校园

Let’s try a line-following code
让我们来写一个小车巡线程序吧
* Try change the speed to improve performance.
(试试改变速度值来提高巡线的表现。)