MAGIQTOUCH CONTROLLER OWNER’S MANUAL |3
• Mount the MagIQtouch Controller in a room you want climate
and away from any other heating or cooling sources.
• Ensure the MagIQtouch Controller is not exposed to direct
sunlight as this will impact the temperature reading.
• Ensure any cable routing holes in the wall behind the
MagIQtouch Controller are blocked as drafts can impact the
temperature reading.
• Avoid blocking or restricting the vent holes located in the side
of the MagIQtouch Controller, as this is where the thermostat is
located.
• Ensure the plug is properly located into the socket located
in the rear of the MagIQtouch Controller before mounting it.
• Do not use harsh chemical cleaners to clean the touch screen.
GENERAL TIPS
